How can I scan with mavericks using Epsom printer

Some users have had success using Image Capture in the Applications folder - although it doesn't seem to work for everybody. Worth a try.

Similar Messages

How can i scan with my epson 837 printer wireless using 10.7.5

how can i scan with epson 837 printer. i am wireless using os x 10.7.5

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How can I scan a photo from the printer and place it in i photo?

How can I scan a photograph from the printer and place it in i photo?

Scan the document as you normally would.
Click Save and look for a format or option to allow you to save as a JPEG file. (The normal format is probably set to PDF)
Seve to your desktop location or to a scanned items folder if you normally scan to that desitnation
Drag the JPEG file onto the iPhoto icon on the dock and release the mouse key
Once you have imported the image into iPhoto, you can delete the file on your desktop or in the scanned items folder if you prefer

How can I scan multiple items using my HP photosmart 2610 and them be able to be in one attachment?

I have an HP photosmart 2610 4 in1. How can I scan multiple items and put them in the same attachment using e-mail? Using my laptop.

Hi @needyrhelp,
Welcome to the HP Forums!
I see that you are wondering how to scan multiple items using your HP photosmart 2610 and for them to be able to be in one attachment in your e-mail. I am happy to look into this for you!
Please see the how to scan guide for the Operating System you are using. Here is the list of how to scan guides, Scan. Select your Operating System from the list, then select How to scan with HP software, then How to scan a multi-page original text document into a single file. You will need to scan each page one at a time, and add it to the same document. The how to scan guide will show you how. After done scanning to the file, then see the link for How to attach a scan to an email.
If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How can I SCAN with the Dell photo aio 922 in my macbook?

Basically Dell doesn't work for macs so I installed the Lexmark X5270 driver and now I can print with my printer, the problem is... how do I scan?
It just doesn't appear as a scaner (only as a printer):
Can somebody help me please????

How can i mess with people using my wifi?

my airport express is wpa2 and passworded. my neighbors are still using it and hacking it. yes im sure. a buddy said something about viewing the DHCP or something and you can see computers connected.
i heard of one guy hacking with scripts. where he has one unsecure network and one secure and one of them automatically redirects their pages to kittenwar.
soo how can i set that up step by step?
or what can i do to mess with them or get them off?
can i control or shut down their computer with the connection?
i could understand them stealing it if it was not passworded. but it is so this means war haha

The neighbors are pulling your leg unless you have given them the password for your network, or you are using a password that is easy to guess.
It is a good idea to change your password as well from time to time. Choose a password that is a mix of random numbers and letters.
i heard of one guy hacking with scripts. where he has one unsecure network and one secure and one of them automatically redirects their pages to kittenwar.
soo how can i set that up step by step?
Providing information like this is a violation of the terms of use agreement that we all signed for this support area.

How can i work with Mysql using socket

hi
When i connect through mysql using socket
then can i send a query to mysql through socket.
if yes then how
retrive data which is performed by query
plz help me
THANKS

not like its not possible, but you better refer to JDBC instead of plain socket... its much easier and its already been done...
google for mysql jdbc tutorial or something...

How can I scan with HP 5600 all in one?

Hi! I have an HP 5600 all in one. I recently switched to an iMac Leopard. The printer driver does not have any scanning support. Is there any other driver available to get this support? Or will I have to get a compatible printer to be able to use scanning options?
Thanks.

Have you checked the HP site, there is software for the 5600 series of all-in-one printer. Its 188Mb download that is titled "Full feature software and drivers for Mac OS X 10.3-10.5".
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&dlc=en&cc=us&produc t=441123&lang=en
regards

How can I. Update with out using a pc ?.

I need help to upgrate my iPad to use netflix and others add that don't let me to down low need update

If you are, as your device tags indicate, already on iOS 5, all you need is a WiFi connection. Open the Settings app, select General, and then Software Update. Follow the directions. If you are on a version earlier than 5, you will need a computer with iTunes to upgrade.
Netflix only requires iOS 4.2. What makes you think you need to upgrade to use it?

How can i upload with facebook using N2690

I want 2 upload to facebook using N2690

Hey Goldfishy86,
What kind of media files are you looking to upload onto facebook?
You could try log into the Facebook website on your device browser and log into your Facebook and view the original website not the mobile version, from there try to upload your media.
If it does not work and you are still looking to upload your videos to Facebook I suggest downloading Nokia PC Suite and transferring your videos to your PC and uploading it via your PC web browser.
I hope this helps, let me know if you manage to solve your issue!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

How can I authenticate with card which status is 'OP_READY' ?

Hello~
I'm doing personalization of smart card.
I'm able to personalize the card which status is 'INITIALIZED'.
However...
According to spec , server follow below process to authenticate with card which status is 'OP_READY'. In that process, select CM is ignored.
Reset Card->Generate Server_Challenge->Intialize session
During that process, I wonder about a few things.
1) When I receive a card from suppliers , what is the status of card?
Is it 'OP_READY' or "INITIALIZED' ?
If it is 'OP_READY' , I have to establish a secure session using ISK
to change the status to 'INITIALIZED'.
How can I authenticate with card using ISK?
Any comments would be greatly appreciated

Hello there,
If you can Authenticate (by that I mean send an Initialise Update command and External Authenticate command) successfully the ISD keys are already on the card. If you cannot Authenticate then you will need to load these onto the card and this is done with the Put Key command. You need to load 3 keys - these are 16 byte keys usually all with the same value e.g. 41 42 ...........4F. Once these keys are on the card you need to set the SCP option (which should be 0105) and then you will be able to Authenticate. You will then be able to send a Set Status command to change the life cycle state of the card (either with the apdu or from an applet using the setCardContentState() method).
I'm guessing that your JCOP card probably has the ISD keys on already and has the SCP option set so there is no need for any additional keys to be loaded at this stage.
Hope this helps,
Stephanie

TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

sonjadg,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

How can I scan multiple pages to one file with MG 7120

My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

Hi albabynyr,
There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file. To scan using the IJ Scan Utility, please follow these steps:
1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then IJ Scan Utility (folder), then IJ Scan Utility (program).
2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
3. Click the DOCUMENT SCAN option on the left pane of the window.
4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan. Do this each time a page has completed scanning. After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I can't install Windows 8.1 on my Imac with Mavericks using Bootcamp. Why?

I can't install Windows 8.1 on my Imac 27" with Mavericks using Bootcamp. Why? I first did all the software updates needed, downloaded the driver software to a 32Gb flash drive formatted as FAT32, fired up Bootcamp Assistant, inserted the Windows 8.1 Full version 64 bit installation DVD as requested, and got as far as partitioning (tried this at 82 Gb for the Windows partition), then the MAC rebooted but halted before getting to the login page. Then a black screen came up with the error message: 'non-system disk - Press any key to reboot'. I did this and nothing happened. I was forced to shut down forcibly then restart with my finger held down on the option key. Then a screen came up with two icons: the macintosh HD icon and the Windows DVD icon. I double-clicked on the Windows DVD icon and the MAC came up with another black screen and error message: 'CDBoot: Couldn't find BOOTMGR'. Had to shut down forcibly again and restart as before, this time ejecting the Windows DVD first. Then I repartitioned my MAC back to all OSX. What the **** do I do now? Applecare couldn't help me beyond this point. They said to contact Microsoft. I notice a lot of other MAC owners have had similar problems.
Please help? tagjsmith.

bootcamp does not currently support windows 8.1

HT5621 I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

I have moved permanently from the US to live in the UK. when I try to download a UK app I am often told that I cannot use a UK Apple sstore, only a US store. I need to access various UK stores how can I deal with this?

Try here
http://support.apple.com/kb/HT1311
when you have UK Cards etc best to change as well

How can I scan with mavericks using Epsom printer

Similar Messages

Maybe you are looking for