How can I send multiple App links (a la playlist) to a friend?

Hi,
I have a list of Apps in iTunes. For the sake of argument, let's assume they're all free.
To send a link of an App to a friend, I use the "Send Link" (or "Tell a friend") option in iTunes for each App. The friend can then install each App by clicking on the URL etc etc
How can I do this for say 30 Apps?...all in one go?
Can you create a playlist of Apps to then email/share/export?
I have tried the same way as you do for songs, but it doesn't work. I can't drag an app into a playlist or folder. I have drag&&dropped the actual ipa files into email, but I'm sure there's a smarter way...
Any ideas?
I think this is a great way of bundling Apps in either an informal playlist friend-to-friend sharing way, or, even theme it in a more commercial way by recommending bundles ...e.g. when Travelling in a certain country (i.e. Apps for Maps & Hotels & Petrol Stations & Food etc etc)
Kind Regards
Mark

Hi Vinodkumar,
You have desribed the way that I run my process. However, for subcontracting we must also put the PV into the PIR or the PPM creation will have no link from PV to Vendor and therefore it will not create a PPM.
In R/3 planning, we leave the PV blank in the PIR so the system will automatically choose the correct PV based on the validity dates. I would like to leave the PV blank in the PIR and have APO create PPMs for all Vendors that this material is extended to for each PV. But as far as I know this is not possible. Then APO planning can choose the correct PPM based on validity dates.
Thanks,
Eric

Similar Messages

  • How can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

    how can I send multiple pictures to the Kodak link (under file & then order prints)?  if the photos are not sequential can it be done?

    Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.

  • How can I send multiple pics to email from my iPhone 5

    How can I send multiple pics from photos app on I phone 5 to an e mail?

    Open the album or event folder on your iPhone.  Click the "arrow" icon in the upper right side of your screen.
    Click the pictures you'd like to share via email (they will show a little checkmark when selected).
    Click the "share button at the lower left corner of your screen...
    Taa daa!
    Bob

  • How can I send multiple photos in an email?

    How can I send multiple photos in an email?

    In Photos, when looking at your pictures, click the Action arrow first (upper right), before selecting any pictures.  Then you can tap select the pictures you want to send then click "Share" in the upper left.  From there you can Email.
    If you click and open one picture first, the Action button will only allow you to share that one picture.
    (Yeah, took me a while to figure this out. )
    ivan

  • How can i send multiple films from iMovie06HD to iDVD? ( iDVD gave me ****)

    After 2 weeks of jerky videos, unexpected shutdowns, multiplex and buring errors i yesterday finally had something. Than i noticed, that the chapters didn't work. Allright, i thought, those 5-min chapter-marks are a mess anyway. I got myself iMovie06HD to finally set the markers myself.
    My Problem: I have got four films to burn on that dvd. Each of which is about half an hour and i want them to be on that dvd as four single films with own chapter menues.
    How can i send multiple films to iDVD from iMovie06HD? All i found was "only send selected clips" which i did but then my four single films arrive at iDVD as ONE whole film, with chapters yes - but there is no way to create a menu with four single films. I tried all i could imagine. I tried to solve the problem by creating four iMovie projects which will also create four corresponding iDVD projects. I tried to export the movies in multiple formats but then the chapter markers seem to be gone.
    I have to admit i'm desperate. I hope i made my problem clear to you and somebody knows a solution. Thank you! Cheers, Matthias

    Just drag and drop each iMovie project on to the iDVD menu - being careful to avoid any of the drop zones.

  • How can I send multiple string commands into a VISA write?

    Hi Fellow LabVIEW users
    I am very new to LabVIEW (2.5 months) so please forgive me if my lingo is not up to par.
    How can I send multiple string commands to a VISA write. For example each string command looks like this
    1) 3A00 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0033 (Scenario 1)
    2) 3A01 0000 0000 FFFF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0034 (Scenario 2)
    3) 3A01 0000 0000 33FF FFFF FFFF 0000 0000 FF00 0000 0000 0000 0000 0067 (Scenario 3).
    and so on and so forth. And there are a number of scenarios.
    Each String scenario will give a different string output which will be interpreted differently in the front panel.
    Right now I have to manually change the string commands on the front panel to give me the desired output. How can I do this without manually changing the commands i.e. hard coding each scenario into the block diagram?
    Thanks, any feedback will help.
    mhaque

    Please stick to your original post.

  • How can i send multiple sms from my iphone 4

    how can i send multiple sms from my i phone 4

    Turn Group Messaging (instructions in lin that follows) off and send the message to multiple recipients. The result may be dependent on your carrier. If manually keying in numbers rather than using contacts, use the return key after each number. http://support.apple.com/kb/HT5760

  • How can I download multiple apps without entering my Apple ID every single time?

    How can I download multiple songs or apps without entering my Apple ID every single time?

    It took me a moment to remember where this was!
    1. Open the iTunes app on your Mac and Sign out of your account (Store menu.)
    2. Without signing back in go to the iTunes App Store and buy a free app that you already have*.
    3. A dialog box will pop up for you to sign into your account. When signing in, be sure to tick the box that says Remember password.
    * You can choose any app that you wish, choosing one that you already have keeps you from buying any old app that you may not want.

  • How can we send multiple attachments in a mail from iPad 2

    Hi,
    I am using a ipad2. I want to know how we can send multiple attachments through mail from iPad. I did not find any option of doing this. Is there a way to do this.
    Regards,
    Satyabrat

    You can't do it natively on the iPad (unless you just want to send up to 5 photos from the Photos app). I use the GoodReader app which supports quite a few document/file types (e.g. PDF, Excel, Word, pictures), and from that I can select multiple files (including different types) and attach them to the same email.

  • How can i send multiple Key note files attached in one e-mail

    I've problem with mail attachment. I want to send multiple files from keynote as 4 attached in one mail. Anyone know how? Do I've to wasting time send it one by one? Your kind advice will be a lot appreciated. Thank you ;)

    You can only email one file at a time from the app. Unless you can copy and paste all four files into the email, you can't do it in the Mail App either. There is a third party app called Group Email with Attachments that will allow you to do this. You will have to be running iOS 4 to attach documents I believe.
    Message was edited by: Demo

  • How can I send multiple subcon PPMs to APO since one PV must be in the PIR?

    We often have two or three production versions for a single subcontracting material. For example, PV 01-1 from now until June, then PV 02-1 from June until November. To create the PPM in APO via CFM1/CFM2 we must have one PV in the subcontracing PIR. This means we can only send the currently active PV 01-1 to APO and we can not plan with 02-1 in the future! I know I can manually create this in APO or I can temporarily change the PIR, send the PPM, and then change the PIR back but I would like an automatic process for this.
    Why can't I leave the PV blank in the PIR and that would mean to send ALL PPMs? This is essentially how R/3 planning works... if you leave the PV blank in the PIR it will automatically choose the PV with the correct date ranges.
    I'm sure many people have had this issue but SAP offers no solution. Does anyone know of a user exit or have any ideas on how to resolve this?
    Thanks,
    Eric Strehlow

    Hi Vinodkumar,
    You have desribed the way that I run my process. However, for subcontracting we must also put the PV into the PIR or the PPM creation will have no link from PV to Vendor and therefore it will not create a PPM.
    In R/3 planning, we leave the PV blank in the PIR so the system will automatically choose the correct PV based on the validity dates. I would like to leave the PV blank in the PIR and have APO create PPMs for all Vendors that this material is extended to for each PV. But as far as I know this is not possible. Then APO planning can choose the correct PPM based on validity dates.
    Thanks,
    Eric

  • How can I send multiple attachments using SO_DYNP_OBJECT_SEND?

    Hi,
    I hope someone can offer advice on my problem.
    My requirement is to allow users to select one or more documents from an ALV grid.  I am then required to send these documents to multiple users via email using function module SO_DYNP_OBJECT_SEND.
    I can successfully send one document as an attachment.  However, I can't seem to figure out how to send multiple documents as attachments using SO_DYNP_OBJECT_SEND.  Is this done in the packing list?
    Is there some way to tell the program where the 1st attachment ends and the 2nd attachment starts?
    My attachment content is in i_att_cont.
      CALL FUNCTION 'SO_DYNP_OBJECT_SEND'
        EXPORTING
          object_hd_change = l_title
          object_type      = 'RAW'
          raw_editor       = abap_true
          starting_at_x    = '5'
          starting_at_y    = '1'
          ending_at_x      = '120'
          ending_at_y      = '20'
          edit_title       = 'X'
          external_commit  = abap_true
        TABLES
          objcont          = i_objcont
          rec_tab          = i_rec_tab
          packing_list     = i_packing_list
          att_cont         = i_att_cont
          exclude_fcode    = i_exclude_fcode
        EXCEPTIONS
          object_not_sent  = 1
          owner_not_exist  = 2
          parameter_error  = 3
          OTHERS           = 4.
    If you require more information, please let me know.  I will be happy to provide it.
    Thanks.

    I finally found the solution.
    The trick is to ensure you put the correct values in the body_start, body_num and objlen fields of the packing list.
    Each additional attachment should start (body_start) at the end of the last attachment + 1.
    The value for body_num is equal to the number of lines in the attachment being added.
    And the objlen field is calculated by multiplying the number of lines in the attachent * 255.
    Static data
       gs_packing_list-file_ext = lv_ext.
       gs_packing_list-transf_bin = 'X'.
       gs_packing_list-objla = sy-langu.
       gs_packing_list-objtp = 'EXT'.
       gs_packing_list-objdes = lv_filename.
       gs_packing_list-objnam = 'Attachment'.
       gs_packing_list-head_start = 1.
       gs_packing_list-head_num = 1.
    Body Start
       CLEAR lv_count.
       DESCRIBE TABLE gt_temp_att_cont LINES lv_count.
       gs_packing_list-body_start = lv_count + 1.
    Body Num + Object Length
       CLEAR lv_count.
       DESCRIBE TABLE gt_att_cont LINES lv_count.
       gs_packing_list-body_num = lv_count.
       gs_packing_list-objlen = lv_count * 255.
       APPEND gs_packing_list TO gt_packing_list.
    Hopefully this helps some desperate soul in the future.

  • Two questions 1. how can I send multiple photos to the same number 2. how do I assign a silent ringtone to a number?

    I want to send three photos to the same phone number. How can I do this without sending three seperate texts? Also how do I assign a silent ringtone to a number to block that number?

    you should be able to copy/paste more than one photo into an imessage by holding down on the entry field. When it comes to MMS, the number of pictures you can send is dictated by your carrier
    You could try using this service to create a special ringtone that has no actual sound content
    http://technologyguy.hubpages.com/hub/Convert-iTunes-music-into-ringtone-for-iPh one
    Just make the section of the song that you convert a silent part of a song (like the very beginning or end)

  • How can i send multiple videos and photos, via mail, at the same time?

    you allowed to send only one video or 10(+) photos via mail.
    but can you send both at the same time? so 10(+) photos and a video (or more than one) in one mail?
    because if my mom has birthday pictures or something like that. She likes to be able to send it directly from her iphone to every person she knows in just one mail.
    anyone any tips or tricks?

    Those restrictions are generally part of the email provider, not just the phone. Attachments are restricted due to size, bandwith use, etc. Trying to send that much information in an email attachment is even restricted on a computer. Sharing via photo sites is generally a better option for large amounts of pictures and large video files.

  • How can I make multiple popup links on one page?

    I was wondering if anyone had a simple code that will allow me to have multiple popup links on one page? I have no idea what to do.  Any help would be greatly appreciated.

    Give each an individual id like:
    <SCRIPT language="JavaScript1.2">
    function openwindow1()
    window.open("score_popup/wbc_slalom_running_order.html",
    "mywindow","location=1,status=1,scrollbars=1,width=600,height=525");
    .......... etc.
    and then:
    <p><a href="javascript: openwindow1()">WBC Invitational Slalom Event Running Order</a></p>
    View actual working page here:
    http://www.worldbarefootcenter.com/
    scroll to bottom of page to see pop-up links. View source code for complete details:
    Best wishes,
    Adninjastrator

Maybe you are looking for