How can I set keyframes on a clip segment? (FCP 7)

Hello!
I am trying to set keyframes on a segment of a clip using the pen tool on time line. When I set the first keyframe, one also appears at the start of the clip and when I set the second keyframe, another appears at the end of the clip? There is a thin blue horizontal line the full length of the clip. Whatever speed change I make on the dialogue box, overrides the segment settings. I have already carried out this successfully on a different clip.
Regards,
DG

I gather you're adding speed keyframes. That's the way the application works. Because variable speed changes effect the entire media, not just the marked In and Out in the timeline, keyframes are added at the beginning and end of the clip. The blue line in the Clip Keyframe graph is correct. It indicates a motion keyframe has been applied. Speed is a motion keyframe.
What dialog box are you using? Speed segment changes are made in the timeline from the shortcut menu. Select Change Speed Segment.

Similar Messages

How Can I set my speed of clip to 0%?

How Can I set my speed of clip to 0%?
I can't do that. A minimum value is: 1.00

So I HAVE TO do this in that specific way? I can't normally set a "0%" value of speed curve?
Ann Bens wrote:
Cut it there and do a frame hold or a screen grab.
But how I have to do a frame hold if I can't set speed of one frame to 0%
Ann Bens wrote:
Use a time remapping freeze frame instead if you want 0 speed.
What a rubbish did you say? I am in Time remapping freeze menu and IN THIS MENU we can't set a value to 0%. A value: 1.00% is a minimum.
You have to miss a screen what I paste before, so specially for you (there is even a red box):

HT3775 I can not open a video movie clip, the system ask for a codec, how can a set up that automatlicly

I can not open a video movie clip, the system ask for a codec, how can a set up automatlicly?

The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

How can i make a transition between clips on cutaway?

how can i make a transition between clips on cutaway?

ninafromlisboa wrote:
But if I want ONLY fade out (or in) I can't do it...
OK, I understand what you mean now! I assumed you were asking about the normal Fade In or Fade Out using the transition from the Transitions panel. But I guess you mean the Fade function specific to a Cutaway. When you double-click on a Cutaway the Inspector opens. Here you can set the Cutaway Fade duration. But as you say, it only provides for both fade in and fade out as one operation - you can't set the fades individually (it's both or nothing).
BUT, try the method outlined by Karsten Schluter above. It will give you the same effect and will enable you to fade either side of the Cutaway (or add other transitions).
John

I forgot the administrator password for my mac and cant set a new one without it how can i set a new one

i forgot the administrator password for my mac and cant set a new one without it how can i set a new one

Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/

How can I set an event to repeat on a week day rather than a numerical day of each month?

How can I set an event to repeat on a week day rather than a numerical day of each month? I see an option at the bottom of the repeat window .... but I cannot use it. Actually, when I try it freezes up my Calendar.
Lorrene Baum Davis

These scrrenshots are from Snow Leopard - I would think that Lion wouldn't be too much different.

How can I use OmniPortlet and Web Clipping Portlet?

How can I use OmniPortlet and Web Clipping Portlet?

You find information on OmniPortlet and Web Clipping in the Portal Developer's Guide.
o Building Portlets with OmniPortlet
o Building Content-Based Portlets with Web Clipping
Peter

How can I set my WebI filters to Null and not Null

Folks,
I have created a report in WebI and now I am to set up some filters as Null and some Not Null.
How can I set my WebI filters to Null and not Null?
Regards,
Bashir Awan

Hi,
As you said you could do it at the report level and also at the universe level.
One more way is to create the filters in the universe levele and add them in thequery filter.
Ex: in the filter you need to write :
Column1 is null and and column 2 is not null etc.
Hope this will help.
If this did't solve your problem then please explain it in detail.
Cheers,
Ravichandra K

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

I have an iPad with IMAP email accounts set up but I can find no "inbox, drafts, trash" folders anywhere, either on my ipad or desktop Mac. How can I set them up? They do not show on my MacMail preferences either and I can find no way to add them.

I have an iPad with IMAP email accounts set up but can find no "inbox, drafts, trash" folders for each email account anywhere on my iPad or in Mac Mail. How can I set them up? I can't find anyway to set them up anywhere. Thanks

Hello blu monkey,
I found some resources that I think might help with the visibility of your IMAP email folders on your iPad and Mac.
On your iPad, you may need to follow the steps in this article to make sure your folders are visible:
iOS: If IMAP Mail folders are not visible
http://support.apple.com/kb/HT1393
On your Mac, I am not sure if you have the sidebar enabled, but you can enable it using the steps in the article below. When this is showing, you should see your email account listed near the bottom with a triangle next to it. When the triangle is pointing down, it should show your folders:
Mail (Mountain Lion): Show or hide the sidebar
http://support.apple.com/kb/PH11763
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

I would like to know how can I set songs in iTunes to play at different times automatically during the day. i.e. one song at 10am the other at 10:30am etc..

I would like to know how can I set songs in iTunes to play at different times automatically during the day. i.e. one song at 10am the other at 10:30am etc..

My daughter and i share same itunes account but we want to separate and have our own. if i change "our" account to "her" account how can i set up a new "for me only" account and retrieve all my contacts and apps

my daughter and i share the same i tunes account but want to have our own now. how can i set up a new account just for me and still move or transfer my existing apps, contacts etc?

Yes, with the credentials of the account that the media/content was purchased with.
Content is permanently tied to the account it is purchased with and cannot be merged, moved, or transferred to another account.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I set keyframes on a clip segment? (FCP 7)

Similar Messages

Maybe you are looking for