How can I set the resolution of my external display to 1280x800?

Hi, I'm using a Wacom Cintiq 12WX external pen tablet display with a 24" iMac.
The recommended resolution for this Cintiq is 1280x800. But when I go to System Preferences>Displays set the resolution of the display, the only available options for "Wacom Cintiq 12WX" are:
640x480
800x600
832x624
848x480
1024x768
1024x768 is my nearest option, but it has a different proportion than the display's physical shape--resulting in a slightly stretched display. Because I work with graphic design, this is not exactly desirable...
None of the other resolutions have the same proportion as 1280x800, so a stretch seems inevitable; not even working with a smaller resolution will give me the desired ratio.
So my question is, is there any way to choose resolutions other than those listed in the "Display tab" of System Preferences?
I also noticed that I have the option to rotate the tablet screen 90 degrees; when I do this, the option 800x1280 becomes available, but of course it's sideways...
Any help at all would be very greatly appreciated!

thund3r0us wrote:
Thank you for your help.
I installed the update you suggested, but nothing has changed in my Cintiq 12WX Display menu in System Preferences.
Which update ?
The OSX update or the driver update or both ?
Might be neccessary to reinstall the Wacom driver after the OSX update.
And I concur with Kenichi, if all things fail contact the Wacom Support.
That thing has to work as advertised.
Good Luck
Stefan

Similar Messages

  • How can i set the resolution on my imac ''27 in to 1024*768?

    hello,
    i'm new to imac
    how can i set the resolution on my imac ''27 in to 1024*768?
    its only gives me to options
    1- 1280*720
    2-800*600
    thanks

    My mid-2011 27" iMac, ML 8.3 has 1024x768:

  • Can i choose the resolution of my external display for when the lid is closed when my lid is open

    When I close the lid of my MacBook Pro for an external display apple chooses a resolution that isn't compatible with my display can I choose the resolution when the lid is open in any way of my external display for the mode when the lid is closed?

    Hi there, I had a similar problem and was unable to resolve it.  I spent about an hour on the phone with a very helpful AppleCare rep who was also completely stuck.  It would seem that the only solution is to choose a setting with trial and error while the lid is closed.
    My MacBook ended up getting stuck on a closed-lid reoslution that wasn't supported, so I had to do a screen-share with another device to see what the video card was sending to the external display and change it back that way.

  • How can I set the default in "Write" to display several email address instead of just one?

    Like to see more than one person on the Write screen at a time. The default seems to move the first one up.
    I would rather like to have at least four be able to be seen without any scrolling of addresses. Am familiar with config editor if necessary.

    On my system it was set to the default of 3 address fields. When I went into the config editor and modified the line quoted above to 5 and restarted Thunderbird, the next time I open a Write window I have 5 address fields.
    Only after I fill those 5 fields does the first field scroll up and out of view.
    Yes you can drag the bottom edge of the subject field down to show more fields but this is not permanent. The next time you open a write window it will show the number of fields set in the config editor.

  • How can i set the alternating colors for a table rows

    Dear All,
    Please any one help me how can i set the Alternating colors for Table Rows.
    i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

    Hi,
    The design property in Table properties should work for your requirement. Select "alternating" value for design.
    Please see the API below:
    design
    Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
    alternating - The table rows are displayed alternately in a different color.
    standard - The table background has one color. The individual table rows are displayed with grid net lines.
    transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
    Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
    Regards,
    Jaya.
    Edited by: VJR on Jun 17, 2009 6:43 PM

  • How can I set the page that will open, when I open a new tab, to be the same as the homepage?

    How can I set the page that will open, when I open a new tab, to be the same as the homepage?
    An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
    In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
    thank you,
    Asaf Privman.

    You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
    You can look at one of these extensions:
    * NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
    * New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

  • Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    I have various formatting issues:
    a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
    b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
    c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
    d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
    == This happened
    ==
    Every time Firefox opened
    == Ever since I started using Firefox (a few months ago)
    ==
    '''Troubleshooting information'''
    I didn't find any results
    == Firefox version
    ==
    3.6.3
    == Operating system
    ==
    Windows 7
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
    == Plugins installed
    ==
    *-nphpclipbook
    *Office Plugin for Netscape Navigator
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
    *Default Plug-in
    *Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
    *NPRuntime Script Plug-in Library for Java(TM) Deploy
    *The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
    *Shockwave Flash 10.0 r45
    *Adobe Shockwave for Director Netscape plug-in, version 11.5
    *iTunes Detector Plug-in
    *3.0.40624.0
    *NPWLPG
    *Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

    The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
    You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
    Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
    Check the tooltip of each button by hovering with the mouse over each button.
    Make Link - https://addons.mozilla.org/firefox/addon/142

  • How can I set the language when sending an e-mail with attachment - 'Html'?

    "Character Broken"
    I made an ALV program, and this convert to "HTML',  and send an e-mail with this.
    Used Process is:
    DATA: gt_abaplist LIKE TABLE OF abaplist,
          gt_html LIKE TABLE OF w3html,
          doc_chng LIKE sodocchgi1,
          objpack LIKE TABLE OF sopcklsti1 WITH HEADER LINE,
          objhead LIKE TABLE OF solisti1 WITH HEADER LINE,
          mail LIKE TABLE OF solisti1 WITH HEADER LINE,
          reclist LIKE TABLE OF somlreci1 WITH HEADER LINE,
          lv_line TYPE i.
    DELETE FROM MEMORY ID '%_LIST'.
    SUBMIT z_template
       AND RETURN EXPORTING LIST TO MEMORY.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject = gt_abaplist
      EXCEPTIONS
        not_found  = 1
        OTHERS     = 2.
    CALL FUNCTION 'WWW_HTML_FROM_LISTOBJECT'
      TABLES
        html       = gt_html
        listobject = gt_abaplist.
    doc_chng-obj_name   = 'URGENT'.
    doc_chng-sensitivty = 'O'.
    doc_chng-obj_descr  = ' '.
    doc_chng-obj_langu  = '3'.
    objhead-line        = ' '.
    APPEND objhead.
    mail[] = gt_html[].
    DESCRIBE TABLE mail LINES lv_line.
    CLEAR: objpack.
    objpack-transf_bin = 'X'.
    objpack-head_start = 1.
    objpack-head_num   = 0.
    objpack-body_start = 1.
    objpack-body_num   = lv_line.
    objpack-doc_type   = 'htm'.
    objpack-obj_descr  = ' '. 
    objpack-doc_size   = lv_line * 255.
    objpack-obj_langu = '3'.
    APPEND objpack.
    CLEAR: reclist.
    reclist-receiver = 'e-mail address'.
    reclist-rec_type = 'U'.
    APPEND reclist.
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
        document_data              = doc_chng 
        put_in_outbox              = 'X'
        commit_work                = 'X'
      TABLES
        packing_list               = objpack
        object_header              = objhead
        contents_bin               = mail
        receivers                  = reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
    SUBMIT rsconn01 AND RETURN.
    I want to show  this by "Japanese".
    But the character is broken.
    LIke This:
    u01D1u072C          u0205|            u0205u072C          u0508           QC u04B90m
    How can I set the language?  How can I solve "Charancter Broken" ?
    Plesse, let me know.
    Thank you so much.
    Edited by: Jaime White 999 on Nov 21, 2011 8:45 AM
    Edited by: Jaime White 999 on Nov 21, 2011 8:46 AM

    Hi Jaime,
    Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both  objpack-obj_langu = '3' & doc_chng-obj_langu  = '3' instead of '3' please replace it with 'J'.
    Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
    Regards,
    Gokul

  • How can I set the data binding between Web Dynpro & Database table

    Dear friend,
    I am a beginner of Web Dynpro. I want to develop my simple project like these:
    1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
    2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
    For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
    1. How can I set the data binding between Web Dynpro and Database table ?
    2.  Are there any nescessary steps that I will concern for this case?
    Sorry if my question is simple, I had try  to find solution myself, but it not found
    Thanks in advances,
    SeMs

    Hi,
    You can write your own connection class for establishing the connection with DB.
    Ex:
    public class  ConnectionClass {
    static Connection con = null;
    public static Connection getConnection() {
    try{
    Context ctx = new InitialContext();
    DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
    con = ds.getConnection();
    return con;
    }catch(Exception e){
    return null;
    You can place the above class file in src folder and you can use this class in webdynpro.
    You can have another UserInfo class for reading and writing the data into the DB .
    Regards, Anilkumar
    PS : Refer
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
    Message was edited by: Anilkumar Vippagunta

  • In EIC, how can we set the SLA of a subcategory to none SLA-related.

    Hi Experts,
    This is our current setup in EIC...
    Category 0501 has an SLA of 8 hours. Subcategory 050101 has to be none SLA relevant. But if we put zero or blank to the SLA Target Value field, it will automatically have a due date defaulted to today. If we will not indicate 050101 on the configuration, it will have the 0501 SLA of 8 hours.
    How can we set the 050101 SLA off?
    The path: IMG --> Personnel Management --> Employee Interaction Center (EIC) --> Interaction Center Web-Client --> Application Functions --> Activity --> Service Level Agreement (SLA) --> Define SLV Properties
    Thanks in advance.

    Hi Harish and Jarret.
    @Harish, I already tried unchecking the checkbox of the Display field but the problem with this is, it will also apply for the rest of the categories. It should only be for this specific subcategory.
    @Jarret, apology, but can you explain to me further about your instruction/advise? I get the feeling that we're on to something with your advise but I didn't quite get it on how to exactly.
    1. You should build the SLA from the lowest level up...
                        -I'm not really sure how, actually.
    2. If you have 8 subcats... will put the 8 entries in the table...
                        -where do I put the 1 subcat? This is because if I don't put that "No SLA" subcat in the table, the due date of that specific subcat will automatically appear todayu2019s date.
    Thanks for both of you. I really appreciate your help. 

  • How can I set the insert date to auto update in Pages 5.2.2

    how can I set the insert date to auto update in Pages 5.2.2
    I am attempting to have the date in header auto update in a Pages file.
    I can insert it, but where is the AUTO UPDATE selection
    OS10.9.4
    thank you

    Apple never included the auto-update feature for dates in Pages v5.2.2. You would have to single-click the date, and deliberately update it.
    If you have Pages ’09 v4.3 in /Applications/iWork '09, then it will allow you to configure auto-update of the date field. Right-click on the date, set the format, and click the selection for automatically update on open.

  • How can I set the order of search engines on my Macbook?

    When I use "Manage Search Engines" to rearrange the order of my search engines, the order changes temporarily, only to revert to the order the search engine add-ons were installed, the next time Firefox is restarted. How can I set the hierarchy of search engines to suit my preference, and have it stay that way?

    It may be your preferences problem.
    Try to Reset your firefox and try it newly
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • How can I set the size of the font so I don't have to change every new word?

    How can I set the size of the font so I don't have to change every new word?

    In what application?

  • How can I set the Corporate Logo instead of Oracle Discoverer logo in 10g

    Hi,
    How can I set the corporate logo/corporate welcom html file instead of oracle discoverer logo in oracle discoverer plus for olap reports version 10.1.2.48.18. while loading the d4o sessions.
    Exactly what are all the steps that I need to follow .
    Thanks,
    Natarajan.U

    Hi Lance,
    Thanks for the documents. Its really helpful to me.
    I am able to change the look and feel of my reports. But I am unable to change the corporate logo.
    The steps that I followed.
    1.Goto discoverer Plus configruation.
    2.Goto Logo change the option button from None to File and Choosed the .jpg file from C:\Logos.
    3.Restarted the application server.
    4.Open the BI plus reports in IE. But still I am seeing the same Oracle Logo only.
    5.But whatever the look and feel like plastic/system/oracle I changed I am able to see the changes.
    6.The logo change is not as simple as I thought??. I need to create Jar on this logo and I need to put the jar file in java /j2ee directory???.
    Thanks,
    Nats

  • How can I set the size of an image in java?

    How can I set the size of an image in java? I have to choose the width and height of image...thanks to everybody...sorry for my english :-)

    Hi 43477
    Can you provide more details, do you want to setsize to display an image on a screen of when saving image etc?
    PS.
    There is a good invention called googlegoogle is good, but sometimes it's better to use more specific search, there is a search field avove on this page :)

Maybe you are looking for