How can I set up the canon printer mf4380dn for macbook pro MD318
I can not set up the canon printer mf4380dn for macbook pro MD318 even thought I set up the printing driver already. The printer usually work good for printing via windows laptop.
I tried some way but error appear "unable to verify the printer on your network". I printing IP is available
Upgrade your RAM to at least 4GB's. Your machine can support 6GB's, but upgrade to 4GB's first. Regardless of what Apple says, you need at least 4GB's to run Lion properly.
Similar Messages
-
How can I know if my new internal hd for macbook pro is compatible?
I have been trying to upgrade my internal HD for macbook pro early 2008 2.4 and have been having a hard time getting it to boot. Problems with both WD and Seagate. I am wondering if the problem is with Mavericks. I got a good back up from Time Machine to load on the hybrid drive. Then when I try to restart it shows the apply symbol with no chime and then a black screen comes over the blue screen with some code (strange problem I have never seen) I can see that all the data is on the drive. I was able to partitian in disk utility. Anything ringing a bell. I have done several switches like this and this is the first time I have had so much trouble. I reinstalled my old drive just to make sure there was not another hardward issue and everything is fine there. In fact I have a new logic board freshly installed by mac.
Your machine has a SATA 2 interface and I'm sure the new drives are SATA 3. They should still step down and work though. It's possible your SATA cable is marginal and the newer drive is trying to demand more out of it than the old one did. A good test would be to put the new drive in an external enclosure and see if it works ok from there. If so, it's probably the cable.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1394657992&sr=1-2&keywords=2.5+enclosure
How did you install Mavericks on the new drive? -
Purchased the latest iMac with no dvd drive; also purchased a Canon printer with dvd set-up; how can I install printer on iMac?
Macs do not usually need to download anything from the CDs that come w/printers. Read the user manual that came w/the printer and/or contact Canon Support.
Or purchase an external burner. Do not purchase Apple's usb burner. 3rd party burners are 110% better. -
How can I set up the Dreamweaver CS6 server for a subdomain of an alias
Through my hosting provider, GoDaddy, my primary domain is oldstraycat.com. I successfully added a mobile site by entering this for the server information: Root Directory (blank), Web URL: http://oldstraycat.com/. That worked.
I also have an alias under that account, twoflutes.com. For that I entered this information: Root Directory: amy, Web URL: http://www.twoflutes.com. That worked, too. Now I need to add a mobile site for twoflutes, and here is where I run into problems. At GoDaddy I set up a subdomain for twoflutes.com: the subdomain is mobile and the folder is mobile2. Leaving http://www.twoflutes.com/ as it is for the URL, in the Root Directory box I entered amy/mobile and amy/mobile2, but when I hit the Test button I get the message "Cannot open the server at amy/mobile2". So then I tried entering just mobile2 in the root folder but the result is an error message page on my mobile device that reads, "Ever feel like you are in the wrong place?"
What am I doing wrong? I would really appreciate your help.You will need to enable file sharing in System Preferences
as well as setting up sharing and permissions for the
directories that you want shared. You may also want to
setup a non-administrative user or allow limited guest
access. The user would require entering a user name and
password to make the connection, but would allow remotes
to change files, if set up tat way.
As for serving iTunes media, better to post in the iTunes forum. -
TS3899 How can I see again the emails sent from my MacBook Pro on my iPhone 4?
Hi. I have a iPhone 4 connected to a Yahoo email account. I used to be able to see the emails sent from the device on the sent mailbox and the emails sent from the MacBook Pro on an automatically created folder called "Sent Messages" that disappeared. I tried deleting the account and creating it again, both on the computer and on the iPhone, but the problem persists. Any idea on how I can solve this problem?
On your Mac
in your Mail App, open the folders on the left hand side, by clicking SHOW on top.
GO down, where your email acount is and unfold.
Select the SENT folder. If you cant find it, it means it's already used as your SENT folder. Skip next step.
In Mail App Menu select MAILBOX -> USE THIS MAILBOX FOR -> SENT
Maybe that does the trick? -
Lost my Mac book Pro and I want to protect all my data in it. I have installed Mac keeper in my MacBook Pro and have activated theft lock. Now who and where should I report the loss of my MacBook Pro?.
Police
Change all of your passwords -
How can I successfully reapply the thermal paste in my MacBook Pro? (2008)
I'm having issues with keeping my computer cool, mainly while playing games like SC2 that require a good amount of power. I've downloaded fan control apps, bought cooling pads (usb powered) and still no luck in cooling this thing down. I recently learned that Apple for some reason applies the thermal paste too thick, which can cause the computers to be a lot hotter than they should be.
I'm not worried about voiding warranty, seeing as I don't even have a warranty. I've already opened it up to upgrade the ram and the hard drive so I know my way around inside there and have the stuff I need in order to do it properly.
What I need to know is where I can get the thermal paste, what kind I need, how it needs to be applied and with what (as well as how to get the old paste off), the steps I need to take in order to get to where this paste is even at inside the computer...etc.
If there's anyone who's already successfully pulled this off, lemme know how you did it and if it helped any. I've read there've been significant temp drops since reapplying it in a lot of these pros, so I'm just interested.Hi
I’ve yet to remove the heatsinks of the CPU and GPU on my MBP. But I’ve replaced CPU and GPU heatsinks on my PC many times, so hopefully you’ll find my suggestions helpful.
1st use the laptop for a bit to get both the CPU and GPU warmed up so it will be easier to remove the heatsinks.
Remove the back cover and run your hands over the back side of the metal cover few time to get ride of any static charge that might be there (or any unprinted metal surface will do).
Remove the screws and heatsink one at a time. You might find the thermal past dried up (happens when company used cheap past and after computer is used for few years). Use tissues to wipe the past off both cores and heasinks.
You can also buy thermal past remover and clearer such as this:
http://www.amazon.co.uk/Arctic-Silver-ArctiClean-Material-Purifier/dp/B000BKP306 /ref=pdbxgy_computers_textb
I normally use Arctic Silver Thermal Paste, I found it's the best past around, and everybody I know are happy with it.
There are two ways to apply the past. If your CPU is a Core2Duo, than you can just put a little bit on the center and press down with the heatsink. This is because the 2 cores on the CPU are located near the center of the processor so it does not matter if the edges are not covered with past.
Or if you want to play safe, you can cover the enter CPU with an even thin lay of past using a flat plastic card.
When it comes to thermal past, less is more, you only want little bit to cover up the metal cover on the processor. I say no more than 0.5 mm thick.
Cover the entire GPU with past as well, I’m not sure if the RAMs on your graphic card are cooled by the heatsinks. If they are, you might need some thermal pads for them.
You’ll find the whole process quite easy as long as you take your time. You can found lots of info on this with Google and Youtube.
Good luck and don’t forget to give the heatsinks a clean with a can of compassed air before you put them back on. -
How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
Compass Health Systems wrote:
How can I set up a preferred printer so I don't have to pick the printer each and every time I print something out? At the moment, even immediately after printing one thing, it prompts me to pick a printer, which is very time consuming.
No, there is not setting for a default printer.The system scans for available airprint printers each time you print. -
Using an own function in a select how can i set that the function run once?
Hi
Using an own function in a select how can i set that the function run once, not in every row?
Please help me
Thanks
ViktorSomething like this ?
SQL> select * from dept;
DEPTNO DNAME LOC
10 ACCOUNTING NEW YORK
20 RESEARCH DALLAS
30 SALES CHICAGO
40 OPERATIONS BOSTON
SQL> create or replace function ret_name (deptnum in number) return varchar2
2 is
3 name varchar2(50);
4 begin
5 select dname into name
6 from dept
7 where deptno=deptnum;
8 return name;
9 exception
10 when no_data_found then
11 return('Not existent deptno');
12* end;
SQL> /
Function created.
SQL> select deptno, decode(rownum,1,ret_name(deptno),null) dname from dept;
DEPTNO DNAME
10 ACCOUNTING
20
30
40
SQL> -
How can I set up the airport extreme base station with windows computer
how can I set up the airport extreme base station with windows computer
Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks
-
I have a laptop Mac and an Ipad, and would like to transfer pictures, videos, etc from the ipad to the Mac but not from the Mac to the Ipad, how can I set up the iCloud in both devises to do so?
Welcome to the Apple Community.
Your best method would be to connect via USB and transfer that way, since videos are not transferred using photostream.
However you can stop photos on your mac being added to photostream in the iPhoto preferences > photostream by unchecking the automatic upload box. -
I lost my apple tv remote. How can I set up the use of my iphone remote app without it?
The remote app would require home sharing to be enabled and both to be on the same network. If that's not the case then you will need a new remote
-
How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip. -
I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?
If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.
-
When I delete a file, it does not appear in the Trash - How can I fix this. Its a brand new MacBook Pro 17''
http://www.thexlab.com/faqs/trash.html for starters.
Maybe you are looking for
-
How to add new fields in Reduced message ( in BD53 )
Hi Experts, How to add new fields in Reduced message ( in BD53 ), when the required field iis available in Table or Structure and need to be added in BD53 so that we can ALE. Thanks, Ninad
-
Get error message using adobe reader
I keep getting a message error that says Adobe blocked for this web site. Why? Does Apple have a reader I can use for all pdf's?
-
Production confirmation screen CO11
Hi All, My requirement is that during Prod Order Confirmation using transaction code CO11, the yield is not appearing in the initial screen to suitably select the quantity needed for confirmation. It comes in a subsequent screen and in case I need to
-
Exporting video for the web for windows Media player
What software can i use to compress an AVI file for the web. The finished product will be WMA file.
-
Grants for a procedure to create a snapshot
Hi Forum, I'm struggling with identifiying the necessary system rights to enable a procedure to create a snapshot using execute immediate. Is anybody aware of the grants which have to be assigned to the user owning that proc? Thx for any help, Juerge