How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

I assume you have different iTunes collections on different PC's, or on different logins on the same PC?  If that's the case then just enable "Home Sharing" in each iTunes using the SAME iTunes username and password as you enabled home sharing on the Apple TV with. The account used for home sharing is NOT the same as the account used to access the iTunes store, so as long as you use the same account (pick one, doesn't matter which) then you should see both of yor iTunes libraries on the Apple TV. Note - each iTunes has ti be running in order for the Apple TV to see the library.
Here's some details on how to do it:
http://support.apple.com/kb/HT4363

Similar Messages

  • HT1414 I have an iphone 3g that has been wiped. I want to restore back to factory settings. How do I do this?

    I have an iphone 3g that has been wiped. I want to restore back to factory settings. How do I do This?

    scififreakster wrote:
    When i plug it into the computer, Windows opens and says Found new hardware. Apple device in recovery mode. Then asks if i want to install software that it doesnt have. iTunes doesnt open at all. If I open iTunes, it still doesnt show up anywhere.
    Windows can not identify that an iOS device is in recovery mode. Only iTunes can identify that.
    What is the EXACT error message you're getting?

  • Hi, i have an iphone5 with one icloud ID, and a IPad2 with another Icloud Id, i want to unify both ID, how can I do?

    Hi, i have an iphone5 with one icloud ID, and a IPad2 with another Icloud Id, i want to unify both ID, how can I do?

    Use the same ID on both. Be advised that downloads are forever tied
    to the AppleID used to obtain them, and items from one ID cannot
    be transferred to another ID.
    Use the ID with the most items you want to keep. Anything from the other
    ID will have to be redownloaded with the preferred ID (if purchased, they
    will have to be paid for again).

  • I would like to know how to DELETE icloud from my iMAC desk top. Would it automrically have synced with my wife's I pad, and other wireless devices, or is it all seperate

    Can anyone help me out ?
    I would like to get info on how to DELETE
    iCLOUD from my desk top MAC.
    Would it already have synced to the iPAD?
    Apple does not give any info on the iCLOUD,
    in a proper way to DELETE..for that matter,
    I can't even find "SETTINGS" on my Mac,
    let alone settings for iCLOUD.Any info
    would be better than what Apple gives up.
    Apple is useless when trying to get any information!

    You have to search with some patience and you will find all the informations on the Apple support pages and here in this forum.
    You find i Cloud in SAFARI at www.icloud.com and set as you like.
    Usually iCloud sincs all the devices which have the same AppleID.
    If you wish to use devices for different persons you need to give them different AplleID and on the MAC create different User Accounts. Each will be fully separate.
    Or you can go to settings (settings are to be found under the apple icon on top left of the screen) and from there open Sistem Preferences and iCloud.

  • Can I home share two separate itunes accounts to the same homeshare?

    I would like to home share two separate iTunes accounts we have at the house.  Has anyone done that? Or am I forced to consolidate to one iTunes account which only allows 5 authorized computers?

    Yes you can set up homesharing on more than one library to be shared with other devices, just use the same homesharing ID and password on all of them.

  • HT1660 How can I maintain two separate itunes accounts on one single device without erasing either set of data?

    How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?

    Hi,
    Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one.  Then your purchase will be billded to this new account.  Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account).

  • Can I use two different itune accounts on one computer?

    Can I use two different itune accounts on one computer?

    1. Give her a separate user account on your computer. If you have a backup copy of the library, you can restore it.
    2. If you encounter a 90-day waiting period, click here and ask the iTunes Store staff if they'll remove it.
    (125941)

  • Can I download two different itunes accts on the same computer

    Can I downloan two different Itunes accounts on the same computer under different users???  I have 3 Iphones and they don't want to share an itunes acct.

    Yes. Launch iTunes with the Shift key held down as needed, or use separate Windows user accounts on the computer.
    (107261)

  • Can I transfer money to other accounts on my iPad with iOS 5.1.1? I created another account and put an iTunes gift card on it, but then I realized that all of my apps are on another account, so how do I move that money over?

    Can I transfer money to other accounts on my iPad with iOS 5.1.1? I created another account and put an iTunes gift card on it, but then I realized that all of my apps ere on another account, so when I recovered the password of my previous account, I had money on an account that I do not want to use. Can I transfer the money over?

    Not on your own. Click here and ask the iTunes Store staff to put it back onto the card; they'll only do this if none of the balance has been spent.
    (115868)

  • How can I combine two "My ITunes Folders"

    I have been reading the discussion forums for weeks but have not found a solution to my problem and was hoping someone might be able to help. Here is my situation.
    Background:
    I have a large collection of CD’s that I wanted to import into itunes. Looking at the prospect of importing approx 4,000 cd’s I decided to “divide and conquer”. My wife took half and I took half and we each proceeded to import the cd’s onto our respective PC’s. Unfortunately when he “met in the middle” we didn’t realize it and we each proceeded to import cd’s that the other had already done (i.e. when comparing our music folders there are some duplicates).
    Problem:
    The real question I am trying to get answered is how I can combine the two separate itunes music folders into one. I would like to combine the two folders and then have one itunes music folder that I can import into itunes.
    Any Suggestions? We used iTunes to organize the folders so they use the same “artist, album, song” hierarchy.

    Try this -> syncOtunes

  • Can i load two different itunes on the same computer for two different ipods?

    Can I load two different itunes on my computer for two different ipods?  Or how can I get it so that when I click on itunes, only my songs come up and not my wifes?  And the same for her.

    Yes.  The simplest way is to have separate Windows accounts for each user.  When either user runs iTunes, he/she will have a separate library with distinct content, playlists, etc., and can sync individual iDevices as needed.

  • Can I make two differents selection screen in my program?

    Hi experts!!
    I don't know how to male this, the problem is that I need to make two differents selection screen in my program because I have two differents kinds of button,
    BUTTON1         BUTTON2          BUTTON3
    When I press button1 I received.
    BUTTON4         BUTTON5          BUTTON6
    Now If I press on button4, how can I pick up the event? the name or something associate to this button4?
    Thanks a lot and regards
    Rebeca

    Hi and thanks,
    I've tried with your code,  Velu Lakshmanan,  and I only received another screen with the buttons... I need to put this button in the same screen, now I've this, but I can't receive the event associate to the second's buttons,
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN PUSHBUTTON  1(79) DTP USER-COMMAND DTP
    VISIBLE LENGTH 25.
    SELECTION-SCREEN PUSHBUTTON 28(79) EMP USER-COMMAND EMP
    VISIBLE LENGTH 25.
    SELECTION-SCREEN PUSHBUTTON 55(79) ABS USER-COMMAND ABS
    VISIBLE LENGTH 25.
    PARAMETERS: PROC_TYP TYPE I DEFAULT 1 NO-DISPLAY.
    SELECTION-SCREEN END OF LINE.
    * Informes de datos de tiempo.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN PUSHBUTTON 1(25)  TEXT-FED USER-COMMAND FED MODIF ID DT1.
    SELECTION-SCREEN PUSHBUTTON 28(25) TEXT-DCH USER-COMMAND DCH MODIF ID DT1.
    SELECTION-SCREEN PUSHBUTTON 55(25) TEXT-ACH USER-COMMAND ACH MODIF ID DT1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN PUSHBUTTON 1(25)  TEXT-FII USER-COMMAND FII MODIF ID DT1.
    SELECTION-SCREEN PUSHBUTTON 28(25) TEXT-PTB USER-COMMAND PTB MODIF ID DT1.
    SELECTION-SCREEN PUSHBUTTON 55(25) TEXT-PTS USER-COMMAND PTS MODIF ID DT1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN PUSHBUTTON 1(25)  TEXT-ACI USER-COMMAND ACI MODIF ID DT1.
    SELECTION-SCREEN PUSHBUTTON 28(25) TEXT-FIM USER-COMMAND FIM MODIF ID DT1.
    SELECTION-SCREEN PUSHBUTTON 55(25) TEXT-LDH USER-COMMAND LDH MODIF ID DT1.
    SELECTION-SCREEN END OF LINE.
    * Informes de empleados
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN PUSHBUTTON 1(25)  TEXT-LDP USER-COMMAND LDP MODIF ID EM1.
    SELECTION-SCREEN PUSHBUTTON 28(25) TEXT-PDF USER-COMMAND PDF MODIF ID EM1.
    SELECTION-SCREEN PUSHBUTTON 55(25) TEXT-LDT USER-COMMAND LDT MODIF ID EM1.
    SELECTION-SCREEN END OF LINE.
    * Informes de bajas
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN PUSHBUTTON 1(25)  TEXT-BAJ USER-COMMAND BAJ MODIF ID AB1.
    SELECTION-SCREEN PUSHBUTTON 28(25) TEXT-VMA USER-COMMAND VMA MODIF ID AB1.
    SELECTION-SCREEN PUSHBUTTON 55(25) TEXT-SDE USER-COMMAND SDE MODIF ID AB1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN PUSHBUTTON 1(25)  TEXT-LDB USER-COMMAND LDB MODIF ID AB1.
    SELECTION-SCREEN PUSHBUTTON 28(25) TEXT-LDA USER-COMMAND LDA MODIF ID AB1.
    SELECTION-SCREEN PUSHBUTTON 55(25) TEXT-DHT USER-COMMAND DHT MODIF ID AB1.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK B1.
    * Pintamos los botones que necesitemos mostrar según la opción seleccionada
    AT SELECTION-SCREEN.
      CASE SSCRFIELDS-UCOMM.
        WHEN 'DTP'. PROC_TYP = 1.
        WHEN 'EMP'. PROC_TYP = 2.
        WHEN 'ABS'. PROC_TYP = 3.
      ENDCASE.
    AT SELECTION-SCREEN OUTPUT.
      CASE PROC_TYP.
    * Cuando el botón que ha seleccionado es "Datos de tiempo"
        WHEN 1.
          CALL FUNCTION 'ICON_CREATE'
            EXPORTING
              NAME   = ICON_OKAY
              TEXT   = TEXT-DTP
              INFO   = TEXT-AUS
            IMPORTING
              RESULT = DTP.
          EMP = TEXT-EMP.
          ABS = TEXT-ABS.
          LOOP AT SCREEN.
            IF SCREEN-GROUP1 EQ 'DT1'.
              SCREEN-INPUT = '1'. SCREEN-INVISIBLE = '0'. MODIFY SCREEN.
            ENDIF.
            IF SCREEN-GROUP1 EQ 'EM1'.
              SCREEN-INPUT = '0'. SCREEN-INVISIBLE = '1'. MODIFY SCREEN.
            ENDIF.
            IF SCREEN-GROUP1 EQ 'AB1'.
              SCREEN-INPUT = '0'. SCREEN-INVISIBLE = '1'. MODIFY SCREEN.
            ENDIF.
          ENDLOOP.
        WHEN 2.
          CALL FUNCTION 'ICON_CREATE'
            EXPORTING
              NAME   = ICON_OKAY
              TEXT   = TEXT-EMP
              INFO   = TEXT-AUS
            IMPORTING
              RESULT = EMP.
          DTP = TEXT-DTP.
          ABS = TEXT-ABS.
          LOOP AT SCREEN.
            IF SCREEN-GROUP1 EQ 'DT1'.
              SCREEN-INPUT = '0'. SCREEN-INVISIBLE = '1'. MODIFY SCREEN.
            ENDIF.
            IF SCREEN-GROUP1 EQ 'EM1'.
              SCREEN-INPUT = '1'. SCREEN-INVISIBLE = '0'. MODIFY SCREEN.
            ENDIF.
            IF SCREEN-GROUP1 EQ 'AB1'.
              SCREEN-INPUT = '0'. SCREEN-INVISIBLE = '1'. MODIFY SCREEN.
            ENDIF.
          ENDLOOP.
        WHEN 3.
          CALL FUNCTION 'ICON_CREATE'
            EXPORTING
              NAME   = ICON_OKAY
              TEXT   = TEXT-ABS
              INFO   = TEXT-AUS
            IMPORTING
              RESULT = ABS.
          DTP = TEXT-DTP.
          EMP = TEXT-EMP.
          LOOP AT SCREEN.
            IF SCREEN-GROUP1 EQ 'DT1'.
              SCREEN-INPUT = '0'. SCREEN-INVISIBLE = '1'. MODIFY SCREEN.
            ENDIF.
            IF SCREEN-GROUP1 EQ 'EM1'.
              SCREEN-INPUT = '0'. SCREEN-INVISIBLE = '1'. MODIFY SCREEN.
            ENDIF.
            IF SCREEN-GROUP1 EQ 'AB1'.
              SCREEN-INPUT = '1'. SCREEN-INVISIBLE = '0'. MODIFY SCREEN.
            ENDIF.
          ENDLOOP.
      ENDCASE.
    Help please... I don't know how can I make this.....
    If I use screen...how can I put this screen in the correct place?
    Thanks a lot
    Regards,
    Rebeca

  • How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?

    hello,
    How can i upload two different logos for 2 sub sites [which falls under one super site ] in share point 2013 ?
    thanks,
    Jay

    Hi,
    I understand that it applied first logo to all other sub sites.
    Please make sure that you change the logos in the subsites.
    If we change the logo in the root site, the logos in the subsites will be changed at the same time.
    However, we can change the logo in the subsites separately.
    We can go to a subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo->select a picture, then it will has a different logo than the root site.
    Then go to the other subsite, click the Site Sitting-> Look and Feel-> Title, description, and logo->Insert Logo-> select another picture, then it will has a different logo that the first subsite.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • I have one imac. my wife and i each have our own user accounts and itunes library.  How do we share selected music between user accounts?

    i have one imac. my wife and i each have our own user accounts and itunes library.  How do we share selected music between user accounts?

    To give other users read-only access to your library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
    If you want to give full read/write access to more than one user, see the support article linked below.
    iTunes: How to share music between different accounts on a single computer

  • TS2446 Hi I have a problem I can not purchase from the iTunes application with the knowledge that I have dollars I hope a solution to this problem and thank you

    Hi I have a problem I can not purchase from the iTunes application with the knowledge that I have dollars I hope a solution to this problem and thank you

    What happens when you try to buy something ?
    If you are getting a message to contact iTunes support then you can do so via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    If it's a different problem ... ?

Maybe you are looking for

  • Nokia N86 8MP Photo Album problem

    Hi Recently, when I opened the gallery to look at my photos, I found that in the "Captured" section of the gallery it said I had 0 photos, when previously there were around 300. If I try to browse to the pictures using the "Months" feature I also fin

  • Podcast feed image doesn't show up

    Hi, I have two separate podcast image issues here: 1. I can't get the feed image of a new podcast to show up at all. The podcast has been showing up for a while now. How long does it take for the feed image to show up? Is there no maximum size for fe

  • ITunes problem -- attempting to access ITS crashes iTunes

    I am using iTunes v7.1.1 (5), and am unable to access the ITS. When attempting to access, when the ITS loading progress bar is 99% complete, iTunes crashes every time. I've reinstalled the app, reinstalled Quicktime, have all USB devices unplugged. I

  • Still confused :S

    Hi i wrote a post yesterday asking for help, and i got some good advice which i have been able to use, but i still cant get to what i need to get, and im still not sure if its possible to do :-S My idea1: * I want to have a 3D cube which rotates usin

  • Bizzare usage of space in my user directory

    When I look at what I guess is the mac equivalent of my "home directory" /User/[Username] it is 68.10 GB.  This seems really excessive compared to what  I know/think I put in there.  (For example when I right click it and click "Get Info" I get 67,xx