How can I show a 0% range in the data value label on a bar chart thanks?
How can I show a 0% range in the data value label on a bar chart thanks?
I'm not sure what the question is.
I know that if you have a bar chart and one of the categories (X-axis) has bar (Y value) equal to 0%, no bar is plotted for that category. Even the addition of a stroke (line) around the bars doesn't make one appear for 0%. The only automatic way I know of to make it look like there is data in that category is to add the value labels to the bars. Inspector/Chart/Series, select one of the bars on the chart, click on "value labels". Another method that is a workaround is to fudge the number a little in your table so that instead of 0% it is a very small %. This will get you a thin line on the chart.
But if your question is about the value labels (the numbers that display on or in the bars) and you are not getting one for a bar that is supposed to be 0%, it probably means your table doesn't actually have a 0% in the corresponding cell. A blank cell in the table will not get a value label.
Similar Messages
-
How can I show Foreign Key name in the Data model Table window
Hi,
In one of my table, I had a Foreign Key, but that is not indexed. I want to display the name with in the table second window in realtional data model. If it is indexed, then it is showing in third window. How I can show without indexing that column?
Thanks.I want to show Foreign Key name in the second window.
Thank you for considering my question,
Sundar -
How can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi
Hai to all,
how can i create an indicator to read the RMS value of my FFT using FFT Spectrum (Mag-Phase).vi.
as u can see in my block diagram(attached), i can use statistic to read the RMS value for the data but i cant's use it on the FFT Spectrum (mag-Phase).vi .
Thank you for helping.
Attachments:
block diagram.jpg 48 KBhafizzuddin wrote:
thank you for the opinions, for now i am not using any express Vi..
In the long run you will benefit from this. Anyway is your problem solved, or do you need more help?
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far) -
I just upgraded to iOS 7 and I realized that the "Completed" tasks folder in the "Reminders" application was erased. I had important information there. How can I recover my completed tasks and the dates the tasks were completed?.
Restore from your iTune backup.
-
My iPad Air is disabled after wrongpassword attempts.I didn't sync it with my laptop also. How can I restore it with out losing the data.
You can't unlock it without losing data. It's too late for that now. You totally erase the iPad when you unlock it and you will have to start all over again. Most of your purchased content can be downloaded again.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Download past purchases - Apple Support -
Reg:How can we show non valuated stock in the system for the paid items?
Hi All,
Customer orders 100 boxes and pays to all material.But customers are shipped the required material as and when required.My client requirement is these 100 boxes should show as non valuated stock.
How can we show these paid 100 boxes of material as non valuated stock in the sap? Is this functionality available in sap or it comes under requirement?
Ex:Customer X ordered 100 boxes and he paid to all quantity.
The customer X does not have space at his premises to keep the stock of 100 boxes.He just requests 20 boxes every monday or required quantity.Then company ships the required quantity to customer X.
Now the requirement is that these 100 boxes should be shown as non valuated stock in the system.This should not used for other customers, should not work ATP functionality for these material quantity.This should show as reserved to this customer X
could you share any ideas or solutions reg this..
Thanks in advance,
Regards....VM
Edited by: vm on Mar 9, 2009 3:46 PMHi Arnel,
Thank you for giving valuable points.
In consignment scenario,the stock is available at customer place not at company place.But ownership is company itself.
But in this scenario,Customer is not having space to keep the total ordered quianty.So cutomer stock should be kept at company itself,customer requests the required quantity(for which he already paid for the total ordered quantity) as and when required.How can it suits in this scenario?Could you plz calirfy the debit memo to realize sales ?How it will be help ful?
Thanks and regards...VM
Edited by: vm on Mar 10, 2009 9:19 AM -
How can I use "write to spreadsheet" during the data is taking but not the end of all the loops
Hi,
I have to run an experiment on Labview 6 or 5. I don't have Labview 7 on that computer for some reason. My experiment is talking about 1000 hours, and I have a probelm on storing the data. Right now I am using "Write to spread sheet" and I set the "append" to false. And the data is installed at the end of the experiment, that means after 1000 hours. In the mean time if somthing oges wrong like power cut or what, I will lose all the data. So what I want to do is to save the data evertime when the data is took. I tired to set the "append" to true, but it does not let me to choose the "file path"--- when I choose this and select write on new or excisting file, it said" you may not be able to save on a exciting file" and it does not let me create a new file either. If anyone have the lidea like how can I use the "wrtie to spreadsheet" function and at the same time can install the data everytime inside the look, please let me know. Thanks alot.
KLKL,
It sounds like you want to periodically save your data so it is in smaller files. (great idea) For this operation you will not want to append the data...if something happens to your system while the file is open it could become corrupt and ruin all the data. You need to write the new block of data to a new file every time. Now...this depends on how big your data is...if you only have like 500k of data to write in a block you should probably write several blocks before starting a new file. I don't know enough about how much data you are acquiring. In either case...the write to spreadsheet file.vi will need a different name each time it is called and you will not want to append. Append = false.
-Brett -
How can I get a picture to display the date it was taken?
How can I get a picture taken by my z10 to display the date it was taken?
Gabrielamck wrote:
How can I get a picture taken by my z10 to display the date it was taken?
The only way to do so, is by manually renaming the picture
Using the Playbook and the Z10 and the Z30 and loving them
Martin -
How can I use oracle function to decode the encode value
Hi everybody,
If the data is encode value how can I decode this valueDBMS_OBFUSCATION_TOOLKIT
DBMS_OBFUSCATION_TOOLKIT allows an application to encrypt data using either the Data Encryption Standard (DES) or the Triple DES algorithms.
The Data Encryption Standard (DES), also known as the Data Encryption Algorithm (DEA) by the American National Standards Institute (ANSI) and DEA-1 by the International Standards Organization (ISO), has been a worldwide encryption standard for over 20 years. The banking industry has also adopted DES-based standards for transactions between private financial institutions, and between financial institutions and private individuals. DES will eventually be replaced by a new Advanced Encryption Standard (AES).
DES is a symmetric key cipher; that is, the same key is used to encrypt data as well as decrypt data. DES encrypts data in 64-bit blocks using a 56-bit key. The DES algorithm ignores 8 bits of the 64-bit key that is supplied; however, developers must supply a 64-bit key to the algorithm.
Triple DES (3DES) is a far stronger cipher than DES; the resulting ciphertext (encrypted data) is much harder to break using an exhaustive search: 2**112 or 2**168 attempts instead of 2**56 attempts. Triple DES is also not as vulnerable to certain types of cryptanalysis as is DES. DES procedures are as follows:
DESEncrypt Procedure
DESDecrypt Procedure
Oracle installs this package in the SYS schema. You can then grant package access to existing users and roles as needed. The package also grants access to the PUBLIC role so no explicit grant needs to be done.
This chapter discusses the following topics:
Overview of Key Management
Summary of DBMS_OBFUSCATION Subprograms
Overview of Key Management
Key management, including both generation and secure storage of cryptographic keys, is one of the most important aspects of encryption. If keys are poorly chosen or stored improperly, then it is far easier for a malefactor to break the encryption. Rather than using an exhaustive key search attack (that is, cycling through all the possible keys in hopes of finding the correct decryption key), cryptanalysts typically seek weaknesses in the choice of keys, or the way in which keys are stored.
Key generation is an important aspect of encryption. Typically, keys are generated automatically through a random-number generator. Provided that the random number generation is cryptographically secure, this can be an acceptable form of key generation. However, if random numbers are not cryptographically secure, but have elements of predictability, the security of the encryption may be easily compromised.
The DBMS_OBFUSCATION_TOOLKIT package does not generate encryption keys nor does it maintain them. Care must be taken by the application developer to ensure the secure generation and storage of encryption keys used with this package. Furthermore, the encryption and decryption done by the DBMS_OBFUSCATION_TOOLKIT takes place on the server, not the client. If the key is passed over the connection between the client and the server, the connection must be protected using Oracle Advanced Security; otherwise the key is vulnerable to capture over the wire.
Key storage is one of the most important, yet difficult aspects of encryption and one of the hardest to manage properly. To recover data encrypted with a symmetric key, the key must be accessible to the application or user seeking to decrypt data. The key needs to be easy enough to retrieve that users can access encrypted data when they need to without significant performance degradation. The key also needs to be secure enough that it is not easily recoverable by an unauthorized user trying to access encrypted data he is not supposed to see.
The three options available to a developer are:
Store the key in the database
Store the key in the operating system
Have the user manage the key
Storing the Key in the Database
Storing the keys in the database cannot always provide bullet-proof security if you are trying to protect data against the DBA accessing encrypted data (since an all-privileged DBA can access tables containing encryption keys), but it can provide security against the casual snooper, or against someone compromising the database files on the operating system. Furthermore, the security you can obtain by storing keys in the database does not have to be bullet-proof in order to be extremely useful.
For example, suppose you want to encrypt an employee's social security number, one of the columns in table EMP. You could encrypt each employee's SSN using a key which is stored in a separate column in EMP. However, anyone with SELECT access on the EMP table could retrieve the encryption key and decrypt the matching social security number. Alternatively, you could store the encryption keys in another table, and use a package to retrieve the correct key for the encrypted data item, based on a primary key-foreign key relationship between the tables.
A developer could envelope both the DBMS_OBFUSCATION_TOOLKIT package and the procedure to retrieve the encryption keys supplied to the package. Furthermore, the encryption key itself could be transformed in some way (for example, XORed with the foreign key to the EMP table) so that the key itself is not stored in easily recoverable form.
Oracle recommends using the wrap utility of PL/SQL to obfuscate the code within a PL/SQL package itself that does the encryption. That prevents people from breaking the encryption by looking at the PL/SQL code that handles keys, calls encrypting routines, and so on. In other words, use the wrap utility to obfuscate the PL/SQL packages themselves. This scheme is secure enough to prevent users with SELECT access to EMP from reading unencrypted sensitive data, and a DBA from easily retrieving encryption keys and using them to decrypt data in the EMP table. It can be made more secure by changing encryption keys regularly, or having a better key storage algorithm (so the keys themselves are encrypted, for example).
Storing the Key in the Operating System
Storing keys in the operating system (that is, in a flat file) is another option. With Oracle8i you can make callouts from PL/SQL, which you could use to retrieve encryption keys. If you store keys in the O/S and make callouts to retrieve the keys, the security of your encrypted data is only as secure as the protection of the key file on the O/S. Of course, a user retrieving keys from the operating system would have to be able to either access the Oracle database files (to decrypt encrypted data), or be able to gain access to the table in which the encrypted data is stored as a legitimate user.
User-Supplied Keys
If you ask a user to supply the key, it is crucial that you use network encryption, such as that provided by Oracle Advanced Security, so the key is not passed from client to server in the clear. The user must remember the key, or your data is nonrecoverable.
http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96612/d_obtool.htm#ARPLS028
Joel P�rez -
How can i update my new iphone with the data from my old iphone?
I recently bought an iphone 3GS after my iphone 4 was stolen but when i try to sync the new phone it says the software is out of date. (when i was telling the guy at the apple store about my phone being stolen he said when you get a new phone just sync it to retrieve all the information stored on there. Is there any way i can retrieve the stuff from my old phone? I would like my messages, notes and apps from my old phone on my new one.
Just to make sure - You're saying you had backed up your iPhone 4. When you plug in the 3GS, and try to "restore" the data from the iPhone 4 backup onto the 3GS, you get that error? Check to see if the iOS version is up-to-date, and hopefully it isn't. It might also be because your iPhone 4 wasn't, and is causing some sort of problem.
Good luck! -
How can I export a video and keep the date?
When I export the video and import it again, it changes the date to the date of today. It doesn't happen with the photos, only with videos.
I changed the dates of a lot of videos and then re-imported them again, I realised I lost all my work of editing.
Thanks,You can only modify the File Created date with a 3rd party application after you export it to the Desktop. Video files do not have EXIF field that image files do so can't be modified by iPhoto or Photos. What I do is rename the file with the date created and a brief description like: 2005-01-08-LaHanbraSpain.mov
You can do that with one of the Automator/Applescripits that léonie has posted in the User Tips section:Photos for Mac
Photos for Mac: Batch Change the Descriptions
Then export the original out with the option File Name = Title -
How can I create a month and have the dates change on each page, auto?
Hey!
I need some indesign help.
I have a section "January" and another "February" etc for the 12 months.
I have one day per page with a month as a section. Then another month as a section and one day per page etc?
I want to auto change the date on each page.
I already have page numbers....
Any suggestions would be appreciated!
T.Have you considered using CSS styled text/list menus instead of image rollovers. It isn't hard really and it's actually a much better choice for web accessibility and for search engines to find and follow your links. Here are some links to several CSS menu systems you can try:
CSS Express Drop-Down Menus (tutorial)
http://www.projectseven.com/tutorials/navigation/auto_hide/
CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus (download)
http://www.highdots.com/css-tab-designer/
List-O-Rama (DW Extension)
http://www.dmxzone.com/go?5618
CSS Menu Maker (On-Line Menu Generator)
http://www.cssmenumaker.com/
Pop-Menu Magic2 by PVII (DW extension purchase)
http://www.projectseven.com/products/menusystems/pmm2/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
How do I remove the drop shadow from the value label on a bar chart?
All of the shadow settings are disabled for the value labels, and for the chart in general, but the shadows still show. Any ideas on how I can remove them?
ensure you have selected the label, not the graph:
shadow on:
shadow off: -
How can I use Hash Table when processing the data from cdpos and cdhdr
Hello Guru,
I've a question,
I need to reduce the access time to both cdhdr and cdpos.
Because may be I'll get a huge number of entries.
It looks like that by processing cdhdr and cdpos data will take many secondes,
it depends on how many data you need to find.
Hints : Putting instructions inside a form will slow down the program?
Also, I just want use Hash table and I need to put a loop-instruction going on the hash-table in form.
I know that it's no possible but I can declare an index inside my customized hash table.
For example :
DO
READ TABLE FOR specific_hash_table WITH KEY TABLE oindex = d_oindex.
Process data
d_oindex += 1.
UNTIL d_oindex = c_max_lines + 1.
Doing this would actually not necessary improve the performance.
Because It looks like I'm having a standard table, may be there's a hash function, but it could be a bad function.
Also I need to use for example COUNT (*) to know how many lines I get with the select.
FORM find_cdpos_data_with_loop
TABLES
i_otf_objcs TYPE STANDARD TABLE
USING
i_cdhdr_data TYPE HASHED TABLE
i_objcl TYPE j_objnr
* i_obj_lst TYPE any
i_option TYPE c
CHANGING
i_global TYPE STANDARD TABLE.
" Hint: cdpos is a cluster-table
CONSTANTS : objectid TYPE string VALUE 'objectid = i_obj_lst-objectid',
changenr TYPE string VALUE 'changenr = i_obj_lst-changenr',
tabname TYPE string VALUE 'tabname = i_otf_objcs-tablename',
tabnameo1 TYPE string VALUE 'tabname NE ''''',
tabnameo2 TYPE string VALUE 'tabname NE ''DRAD''',
fname TYPE string VALUE 'fname = i_otf_objcs-fieldname'.
DATA : BEGIN OF i_object_list OCCURS 0,
objectclas LIKE cdpos-objectclas,
objectid LIKE cdpos-objectid,
changenr LIKE cdpos-changenr,
END OF i_object_list.
DATA : i_cdpos LIKE TABLE OF i_object_list WITH HEADER LINE,
i_obj_lst LIKE LINE OF i_cdpos.
DATA : tabnamev2 TYPE string.
IF i_option EQ 'X'.
MOVE tabnameo2 TO tabnamev2.
ELSE.
MOVE tabnameo1 TO tabnamev2.
ENDIF.
*LOOP AT i_cdhdr_data TO i_obj_lst.
SELECT objectclas objectid changenr
INTO TABLE i_cdpos
FROM cdpos
FOR ALL ENTRIES IN i_otf_objcs
WHERE objectclas = i_objcl AND
(objectid) AND
(changenr) AND
(tabname) AND
(tabnamev2) AND
(fname).
LOOP AT i_cdpos.
APPEND i_cdpos-objectid TO i_global.
ENDLOOP.
*ENDLOOP.
ENDFORM. "find_cdpos_dataHey Mart,
This is what I met, unfortunately I get the same performance with for all entries.
But with a lot of more code.
FORM find_cdpos_data
TABLES
i_otf_objcs TYPE STANDARD TABLE
USING
i_objcl TYPE j_objnr
i_obj_lst TYPE any
i_option TYPE c
CHANGING
i_global TYPE STANDARD TABLE.
" Hint: cdpos is a cluster-table
CONSTANTS : objectid TYPE string VALUE 'objectid = i_obj_lst-objectid',
changenr TYPE string VALUE 'changenr = i_obj_lst-changenr',
tabname TYPE string VALUE 'tabname = i_otf_objcs-tablename',
tabnameo1 TYPE string VALUE 'tabname NE ''''',
tabnameo2 TYPE string VALUE 'tabname NE ''DRAD''',
fname TYPE string VALUE 'fname = i_otf_objcs-fieldname'.
* DATA : BEGIN OF i_object_list OCCURS 0,
* objectclas LIKE cdpos-objectclas,
* objectid LIKE cdpos-objectid,
* changenr LIKE cdpos-changenr,
* END OF i_object_list.
** complete modified code [begin]
DATA : BEGIN OF i_object_list OCCURS 0,
objectclas LIKE cdpos-objectclas,
objectid LIKE cdpos-objectid,
changenr LIKE cdpos-changenr,
tabname LIKE cdpos-tabname,
fname LIKE cdpos-fname,
END OF i_object_list.
** complete modified code [end]
DATA : i_cdpos LIKE TABLE OF i_object_list WITH HEADER LINE.
DATA : tabnamev2 TYPE string.
** complete modified code [begin]
FIELD-SYMBOLS : <otf> TYPE ANY,
<otf_field_tabname>,
<otf_field_fname>.
** complete modified code [end]
IF i_option EQ 'X'.
MOVE tabnameo2 TO tabnamev2.
ELSE.
MOVE tabnameo1 TO tabnamev2.
ENDIF.
** SELECT objectclas objectid changenr
** INTO TABLE i_cdpos
* SELECT objectid
* APPENDING CORRESPONDING FIELDS OF TABLE i_global
* FROM cdpos
* FOR ALL ENTRIES IN i_otf_objcs
* WHERE objectclas = i_objcl AND
* (objectid) AND
* (changenr) AND
* (tabname) AND
* (tabnamev2) AND
* (fname).
** complete modified code [begin]
SELECT objectid tabname fname
INTO CORRESPONDING FIELDS OF TABLE i_cdpos
FROM cdpos
WHERE objectclas = i_objcl AND
(objectid) AND
(changenr) AND
(tabnamev2).
ASSIGN LOCAL COPY OF i_otf_objcs TO <otf>.
LOOP AT i_cdpos.
LOOP AT i_otf_objcs INTO <otf>.
ASSIGN COMPONENT 'TABLENAME' OF STRUCTURE <otf> TO <otf_field_tabname>.
ASSIGN COMPONENT 'FIELDNAME' OF STRUCTURE <otf> TO <otf_field_fname>.
IF ( <otf_field_tabname> EQ i_cdpos-tabname ) AND ( <otf_field_fname> EQ i_cdpos-fname ).
APPEND i_cdpos-objectid TO i_global.
RETURN.
ENDIF.
ENDLOOP.
ENDLOOP.
** complete modified code [end]
** LOOP AT i_cdpos.
** APPEND i_cdpos-objectid TO i_global.
** ENDLOOP.
ENDFORM. "find_cdpos_data -
How can I append an attribute to an xml data value?
I want to add an attribute that doesn't exist, something like
select appendxml(metadata, '/document/@newid', 2) from mytable where id = 1; <=== NO SUCH FUNCTION.
If the attribute already exists, you can call
select updatexml(metadata, '/document/@oldid', 1) from mytable where id = 1;
I don't want to have to do string manipulation to "splice in" the new attribute, then typecast it back to an xmltype. That's a lot of work, is error prone and has performance implications.
Thanks in advance.The documentation provides all you need :
http://docs.oracle.com/cd/E11882_01/appdev.112/e23094/xdb04cre.htm#ADXDB4269
SQL> with sample_data as (
2 select xmltype('<document/>') metadata
3 from dual
4 )
5 select insertchildxml(metadata, '/document', '@newid', '2')
6 from sample_data
7 ;
INSERTCHILDXML(METADATA,'/DOCU
<document newid="2"/>
Maybe you are looking for
-
How to Submit a Service Request with Essential laptops
[quote] Submit a Service Request Create a technical or warranty service request ticket and check its status using our online ticketing system. Note: i) Only applicable for THINK branded products ii) For IDEA branded products, kindly contact our suppo
-
heeeellppp!!!
-
AIR doesn't terminate with pending web service requests
I'm using webservices via the wsdl import tool in the Flex Builder 3.0.2. So far, I'm able to make requests to the webserver and get data from it successfully. The app is basically polling data from the server and when the server gets data, it sends
-
Hi all! I'm sure this one has been done to death, but with. It's a script to monitor a laptop battery and react accordingly. I wrote this for use with FVWM, to send out warning notices using libnotify when the battery gets too low. Since my lapto
-
My iphone 5s is having all kind of problems
my I phone 5s has been acting up. when I put it to sleep, I have to turn the whole phone on again. I woke up to take pictures, and it's all blurry ( I have never drop my phone without a life proof, and I don't remember the last time I did. An also my