How can I stop all tracks on an album playing automatically?

I use my iPod Classic to play backing tracks in my band. I have all our songs in one Album and want to be able to trigger tracks one at a time. But as one track ends the next one starts automatically. I want to be able to trigger the next track myself, when we're ready for it.  I know I could choose 'Song' from the menu but I have a lot of my own albums on the iPod and it would take ages to find the single song I want.  Is there are an easy way to accomplish what I'm trying to do?  Thank you.

A further alternative is to set each of your own songs (in your iTunes Library) to Skip When Shuffling. Since you already have these songs in one album, you shouldn't need to create a Playlist for the album, but you can if you wish.
Sync the changed songs to your iPod. If you use Sync to manage your iPod, then a simple Sync should effect the changed songs on the iPod as well.
Now, on the iPod, select Settings/Shuffle>Songs. Do not use the Shuffle Songs on the Main Menu, this trick doesn't work if you do. You have to set shuffle on the Settings menu.
Now, on the Albums menu, navigate to your album and select the first song. When it ends, the iPod will stop (because every other song in your album is set to skip when shuffling.
At your leisure, you select the next song that you want and start it playing. When it ends, the same thing happens, the iPod stops.
If you created a Playlist (in step 1.) then at step 4, navigate to that Playlist and start your first song playing. Again, when it ends, the iPod will stop since every other song in the Playlist is set to skip when shuffling.

Similar Messages

  • How can I get all tracks from an album into the album in my library?

    When importing the albums from a folder, the tracks for some of the albums were split up.  How can I get them in one?

    Hello JudyD276
    The article below will give the steps to get the songs grouped together for you.
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • A lot of tabs loads and tells me there was a problem loading the page. How can I stop all the tabs loading because ist slows down Firefox.

    When I open Firefox, a lot of tabs try to open at the same time. They all say Problem loading the page. It happened after I tried to download a owners manual for Harley Davidson motor cycles. How can I stop all but one tab from opening.

    This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    See:
    * http://kb.mozillazine.org/Session_Restore

  • How can I stop the intro voice when I play a genius mix

    HOw can I stop the intro voice when I play a genius mix?

    Hi Diavonex. Yes I was aware of this option.
    Subsequently I have done a litle research and downloaded a music app called "Track 8" which has a much clearer interface (larger type) and the abillity to change the background colour to dark or light.
    This is much more readable in the car in bright light, and much better at night too.
    You can also turn off auto-lock within the application, which is great, as it doesn't affect other apps.
    Although this app is really only an interface sitting on top of the music app, it offers a much better experience
    in my opinion that the stock player which seems to have devolved rather than evolved.

  • When syncing iPhone 5s pictures, how can I stop it from backing that album up on my phone?

    When I'm syncing my phone to my laptop, how can I stop it from adding a backup album back to my phone?

    Foxolini wrote:
    I want to delete songs off of my computr because it's taking up unnecessary space, but how can I do this without them being removed from my iPhone when I sync it next?
    As given, removing from the library causes the songs to be removed during sync. So the space taken up is neccessary... What would you do if your iPhone where lost, stolen, damaged or needed to be restored?
    If you ned more room for storage buy a bigger drive. In fact buy two, one to use as a backup for your library and all your other important files.
    tt2

  • How can i stop iTunes 7 for Windows from opening automatically whenever I browse my Music Folder in Windows?

    Whenever I'm browsing through my files on my PC, if I open the iTunes folder inside my music folder, iTunes automatically launches.  If I close iTunes without browsing away from this folder, it simply re-opens itself.
    edit:  I have no Apple devices currently connected to the computer and WiFi Sync is disabled.
    How can I stop this behaviour?
    Message was edited by: azharahs

    Olliev wrote:
    How do I disable itunes on my iphone 4s?
    iTunes app on the iPhone is for purchasing music.
    The fact the iPhone starts playing when connected to your car stereo is a function of your car bluetooth system.
    Consult your car dealer/bluetooth system manual.
    I have attempted to delete all music from the device (so there would be nothing to play), but 1 song remains in the iphone memory and I have been unable to delete that song.
    Connect the iPhone to computer and select it in iTunes.
    Click the Music tab and uncheck Sync music.
    Then click Apply at lower right of iTunes.

  • How can I stop sound track from being divided when adding clips to other tracks in PrE12?

    The situation:
    I have a project with several minutes of video clips on the timeline (expert view) in "Video 1/Audio 1."  There is also music on the sound track (below the empty "Narration" track).
    Any time I make an edit to the Video 1 track, PRE cuts the Sound Track.  (Note that this is not the Audio 1 track, it's the sound track which is two tracks away.)  If I insert a clip, the Sound Track is cut and left with a gap.  Same if I do a FreezeFrame insert.  This is bad enough (make ten insertions, have the Sound Track chopped into ten separate pieces), but it gets worse: when I try to slide the Sound Track pieces back together, the Video 1 clips will be moved around.
    This appears to be a major bug but I'm hoping there is a simple way to deal with it.
    Here's what the Manual (p.71) has to say about it (not much).
    "When you insert a clip into the Expert view timeline, adjacent clips on all tracks shift to accommodate the new clip. By shifting all clips together, the audio and video of the existing clips remain in sync."
    * The question here is, adjacent to what?  The Sound Track is a continuous music clip of many minutes; it is alone on the Track, and there is nothing on the track above it (Narration track).  So it's not adjacent to anything, and yet it is being chopped up.
    The Manual continues:
    "Sometimes, you don’t want all clips to shift with each insertion. For example, when you add background music that superimposes the entire movie, you don’t want clips to shift."
    *They got that right, but they don't say anything about how to prevent it.
    This next makes no sense at all:
    "To shift specific clips togather, press the Alt key as you insert.  At a time, you can shift specific clips simultaneously on a maximum of two tracks.  These include the track receiving the insertion and the track containing the linked audio or video (if any). The affected tracks shift together, remaining aligned. The clips on other tracks are unaffected."
    *There is no mention of how to specify what clips would be shifted, or not.
    I'm not dealing with linked clips.  And they tell me how to shift clips (sort of) but nothing about how to stop clips from being cut up and shifted.  This all makes it very hard to create a coordinated product.
    Any suggestions or solutions will be much appreciated.

    Thanks, ATR,
    I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
    UPDATE:
    In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
    1. Put Video on Vid1 track
    2. Put Music on Sound Track
    3. Ran a few seconds of Vid
    4. Stopped Vid, selected Freeze Frame
    5. Held down Ctrl key while clicking "Insert in Movie"  also tried with holding down Alt key.
    Result: a 3 second still was inserted int the Vid1 track.  A corresponding gap was created in the Sound Track.
    6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
    Result: the video following the final Freeze Frame was pushed to the right end of  Video1 track.
    7. Slid the Sound Track all the way to the left.
    Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
    I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
    UPDATE #2
    In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
    1. Locate video in Project Assets
    2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
    Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
    2b.  R click video in Project Assets (pull-down menu appears), push Alt
    Result: pull-down menu disappears as soon as Alt is pushed down.
    I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

  • How can I use all tracks from multi-channel source audio with Multicam clips?

    I cannot figure this out. Working in Premiere I'm prepping for a 2 camera show, with typically 4 to 6 track dual-system audio recorded by the sound guy. I can sync, and make multicam clips any number of ways–whether sync by timecode, sync by audio, or eyeballing–but whenever I edit using the MC clip, Premiere mixes down all the audio channels into a stereo single track, and I cannot pick and choose which audio track from the original to use. With 2-5 people mic'd on lavs, I need to be able to choose which audio is either cut in or heard at any given shot.
    Is there any way to have control in multicam clips over which track of audio gets edited into the timeline, or even: that all tracks of audio get cut in? It's very important for the editors to be able to see waveform (which also disappears for some reason in the mixdown) and pick and choose which audio is heard?
    I'm sure this might be a simple fix, but I cannot get my head around it for workflow purposes for my assistant editors. We need to use multicam, but this audio thing is driving all of us crazy. None of us can figure out how to have a multicam clip and use it with control over what audio is cut in.

    True, but what I need to be able to do is have my multicam sequence in the source monitor, and cut into my working sequence with either just the audio I need from the sound guy's multi-channel WAV, OR cut in all the sound and from then I can just enable or disable what I need or don't need. But also be able to match back to the Multicam source from my working sequence.
    I don't want to have to open the synced sequence, and razor blade the things I need and have to copy and paste into my working sequence in order to have the full spectrum of my multi-channel mono lav WAV files...with their waveforms visible.
    Essentially, I want my Multicam clips to load in the source monitor, and the ability to cut them into the working sequence without it mixing down the audio into a single track with no visible waveform–which is what it is doing currently. Can I choose to edit in either ALL of the tracks of the WAV file along with the camera shot I want, or control which audio gets cut in?

  • How can I see ALL TRACKS by a particular artist?

    When I do a search in iTunes for a band that has a large catalogue (e.g. Pearl Jam or U2) I only get about 150 results. Now, for Pearl Jam I know there are more songs. How can I see a bands' ENTIRE catalogue of songs without having to click on each album individually? Also, if they have a song on a compilation, why isn't that listed in the bands' "All Albums" area? Thanks!

    Not all songs for a group may be for sale in the iTMS. They may hold out some songs/albums due to legal issues. Some groups have switched labels and not all labels are listing in the iTMS. AeroSmith is another example.
    MJ

  • How can I stop ALL Facebook notifications On Mac

    For some reason, no matter what I've set, I still get Facebook notifications poping up in the upper right corner of my iMac after upgrading to Mountain Lion.
    I have disabled these in the System Settings, and the dont seem to show up in the Notification Center. However, they are still popping up, EVEN when I don't have Facebook open in a tab in a browser!!!
    How can this be?
    Thanks for ANY help...this is driving me nuts!

    http://osxdaily.com/2012/08/06/disable-notification-center-remove-menu-bar-icon- os-x/

  • How can I set all of my songs to play from iCloud with iTunes Match once I've deleted the original file from my computer?

    I'm sure this question has been asked and answered, but after days of looking I cannot find a solution. I would greatly appreciate any advice. I have iTunes Match and recently deleted all of my music intentionally because I plan on using iTunes Match for a good long time and I also know that I can download my files in bulk if I ever the need arose. That being said, now I am having to individually click on songs to make them play. I will get the message "The song 'x' could not be used because the orginal file could not be found. Would you like to locate it?"
    Then I click "Cancel" and the song plays from iTunes Match. Is there a way to make this happen for all of my songs? Thank you in advance!

    Hey I had the same problem-
    The fix to solve the error was quick and easy:
    -Go to My Music tab and click on the song view to show all tracks.
    -Then simply organize by the iCloud Download column. (if not shown, right click the column menu)
    -The songs without any sort of iCloud icon shown are the ones with the error as you mentioned.
    -Select all of those and hit delete. It will then ask to delete off of iCloud but make sure to click NO.
    Voila no more annoying error on every SINGLE track over and over. I felt your pain, and now we are free!

  • How can I stop my iPhone from starting to play music in my pocket?

    Almost everytime I get my phone out of my pocket it's playing music! How do I stop it doing this it's always locked before it goes into my pocket.

    It should only do that if you hold down the T key at startup.  Otherwise the PRAM battery is probably near death, or the T key needs to be cleaned so it doesn't think it is being held down.  To clean the keyboard properly, you will probably need to bring it in for service.

  • How can I stop all of my old emails from downloading to my new iphone?

    When I upgraded to iphone 4S a few years ago, hundreds and hundreds of old emails suddenly downloaded to my iphone, and I couldn't stop it. I can't remember how I resolved the problem then -- but it is happening again with my new iphone 6. My badge is showing 1,000 new emails. How to I correct this?

    ''Zenos [[#answer-679746|said]]''
    <blockquote>
    Move your profile to that drive.
    See: https://support.mozilla.org/en-US/kb/profiles-tb
    </blockquote>
    So the .ini file might read:
    [General]
    StartWithLastProfile=1
    [Profile0]
    Name=default
    IsRelative=1
    Path=E:\Z - THUNDERBIRD\Profiles
    Is that correct for location of:
    E:\Z - THUNDERBIRD\Profiles

  • How can I stop all the messages in a thread opening when I only click on 1 of them?

    I click to open a mail and the others in the thread also open. I only want to open one at a time. [I'm new to Thunderbird, I used to use Outlook Express. ]

    re I click to open a mail and the others in the thread also open.
    when you select to read an email which is part of a thread:
    A single click on email will display it in the Message Pane below.
    A double click will open in a new tab or window if you have this up.
    A right click and select 'Open in conversation' will open a new tab showing all received and your sent responses in that thread as a list, which if you switch off the threading and choose sort by Date, will reorder the list.
    What do mean by open?
    Are you saying that several tabs or windows open all at once?
    OR
    Do you mean that you can see the email response in the Message Pane but below that email there is some more From,Sent, To, Subject headers and email content, which is what the sender was replying about.
    If yes, that's because the person 'Replied' or 'forwarded' the email, so that it is part of the email.

  • How can I stop all of my documents from being in a text ?  Some Documents are not opening, how can fix these two problems?

    All of my documents show up in the text form with small font and difficult to read when I send them as an attachment.  Can you help with this please?

    All I can suggest is to contact iTunes. You should not have been able to create a new account with the same email address
    Apple - Support - iTunes - Contact Us

Maybe you are looking for

  • How do I keep my status bar at the top and not moving from side to side and bottom of phone

    how do I keep my status bar at the top of my phone? I let my grandsn play a game on my phone and after he gave it back I noticed my status bar would move from the top to the side or bottom etc

  • I burned a DVD using FCP X and it skips.

    Are there good video tutorials that go over how to use FCP with compressor? OR how can I get this to not happen? Thanks!

  • Stopped dead with event handling

    ive made a program that has one button, two radio buttons, and a text field....when u click on the radio button is either paints a square or a circle to the screen...im having problems with tieing the textfield and the button..which is called "Enter"

  • Built in iSight not working properly in webcam apps.

    Okay, here's a weird one. When I start a video chat in iChat my preview window freezes and the other side sees just a blank screen. So I switch my iChat prefs to my camcorder and that works fine. I'll switch back to the iSight after that and then it

  • Tilde symbols are driving me mad! Please help!!

    Hi everyone, I am experiencing a problem where the Tilde symbol is being added to file names after I have 'saved for web' in photoshop. Regular names suddenly go to all caps with a tilde symbol added in the middle. For example: 'File-name.jpg' sudden