How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?

How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?
Need support!

How can i stream(air mirroring) *.mkv files between Mac Pro and AppleTV2 by using quicktimeX?
As stated you can't. Even if the compressed data is TV compatible, the container is not. If the file is playback compatible with the QT X Player, you can, of course, play the file on your main system and "mirror" its display to the TV. Unfortunately, this normally means only the video is played back via the TV device. On the other hand, if you convert the MKV content to an TV compatible file (or move the compressed data to an TV compatible container if the data is already TV compatible), then you can mirror the QT X player (with audio) to the TV device in the full screen mode, air play/mirror it from iTunes (or any mobile device), or stream it directly from itunes.
Basically, what you can do here depends on the compressed data in the MKV file container and how you define "mirroring."

Similar Messages

  • HT4437 how  can i stream audio to ipad from video playing on the apple tv using air play?

    how  can i stream audio to ipad from video playing on the apple tv using air play?

    I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

  • How can I hook up 3 screens to a Mac Pro 8 core 2010 model?

    How can I hook up 3 screens to a Mac Pro 8 core. One is a 23' Apple Cinema Display, the second is a 20" Apple cinema display and the 3rd is a 32' Sony Bravia HDTV (connected to mini port with mini/HDMI connector) Do I need to buy another video card? I have heard  about 4 different scenarios about this, and they all sound a bit complicated. I thought that you could automatically connect 3 displays with the card that comes with the MacPro. It has a DVI port and 2 mini ports, so it appears that would be for 3 displays. But this is where it gets strange. Any thoughts?

    Which video card?  5x70?  If you read about the various scenarios thern for 5x70's you need two active adapters for thee monitors (TV considered a monitor).  And you should have seen references to these apple docs:
    Mac Pro (Mid 2010), Mac Pro (Early 2009): Issues with three displays and multiple DVI, HDMI connections
    Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
    It's not really complicated.  Search out the appropriate adapters and hook 'em up.   For the 23" and 20", if they are DVI, you need single link adapters.  For the TV, if you end up using the DVI port for it (because possibly you can't find the appropate adapter cmbination) then you need to handle the audio separately since DVI doesn't carry audio.

  • How can I sync up the IDOC definitions between PI/XI and R3?

    XI/PI gurus,
    We just applied SAP enhancement packs 4 to our R3 and some XI patches to our XI/PI and now we did not see the messages in our XI  QA box after the IDOC was sent out from R3.
    We think one possible cause was the IDOC definition are different between our XI and R3.
    How can I sync up the IDOC definitions between PI/XI and R3 and not mess up our existing mappings in XI?
    Should I just remove the import objects and reipmort the IDOCS from R3 again?
    Thanks in advance!
    Fisher Li

    Use transaction IDX2. The metadata must be deleted from the cache in IDX2, this can be done by selecting the appropriate system from the list, drilling  down the affected IDOC type and chosing delete
    The next time an IDOC is sent or received, the cache will be refreshed.

  • I can't sync my all email message between macbook pro and iPad 4

    Hi,
    I can't sync my all email message between macbook pro and iPad 4. This sync only complete account setting but not email message.
    Can anybody help me to fix the problem?

    You can't "fix" this problem because you can't sync email messages from the Mac mail app, you can only sync your email account settings. Messages will not sync using iTunes.

  • HT204382 hello somebody, how can I open/listen to yousendit file on mac? thnx

    hey guys  how do I open/listen to yousendit file on mac?  Thnx

    To me you have left out the critical information on how you are connected to this other Mac.
    Presumably if you can see the other Mac's drive you can start your iTunes with the option/alt key held down and guide it to the iTunes Library.itl file on the other computer.  That is starting from its library, not just using its media.  You do not do anything with preferences,  Do not touch those.  Many people make the mistake of thinking that is how you use media in another location.  You can point all you want but iTunes will not look there.  It will, though, start storing all your files you add to the iTunes library in that other location from that point on which will result in a fine organizational mess.

  • How can I buy an new Superdrive for my mac pro without having to take my computer to a apple store?????

    I have a Mac Pro and my optical drive is not working anymore.Thus, I went to the online store to buy another one.
    Surprisingly, the only one I found was the macbook air (external) superdive.
    I did not buy it online on that day. However, I went to the Apple Retail Store in Sydney to buy another external hard drive and asked to one of the costumer supports in red if the "macbook air" superdrive would work in any mac. The answer: YES!!! So, I got one. When I was paying the products I asked to the other "red mac guy" the same question... Again, the answer was YES!!!
    So... Do these costumer support guys have any training. It is written in the box that requires a macbook air... That's why I asked for two different guys!!! Why did they say YES???
    Ok! Lets not put the fault on the red guys... So I ask Apple:
    Why apple does not make a external superdrive for pros?? Or one that works for all macs!!
    or simply
    Why can't we buy internal superdrives anymore? Neither the online store or the retail store sell them anymore!!!
    How do I solve my problem? I have to waste my time, making an appointment and taking my Mac Pro to a apple store and wait untill all iphone user in the line learn how to send their photos to their facebook??
    It is really strange how apple is leaving the pro costumers behind to become a ipad and iphone industry!
    Let do not forget that mac only is where it is now becouse of the pros who made it name and did not leave it die.

    You know you don't have to buy a replacement dvd drive from apple.  For example, take a look at OWC's selection. 
    You don't say what year your mac pro is so I use a 2008 as an example.  On that page click the little picture that shows a 2008 mac pro.  That will take you to this page.  And there's an example of a Lite-On drive. 
    In addition, on the right side of that page are links to instructional videos on how to add the drive to your machine.  Click, for example, Optical, med (medium) and you will see how straight forward it is to change the optical drive.

  • How can i share microsoft office 2011 with my mac pro users

    I recently purchased a mac pro and downloaded microsoft office but want to know how to share with other users on my mac.

    It sounds like you installOffice in the Library folder in your account which limits the use of Office to your account.
    If you would have installed it in the Library at root then everyone on the Mac can use it.
    Not be a user of Office, I think you will have to uninstall it and then reinstall it correctly in the Library folder at root.
    Allan

  • Can i remotely share files between macbook pro and iMac

    Want to know if I can do remote file sharing between macbook pro and imac.

    Yes, absolutely. She can access her iMac from anywhere that has an Internet connection. If Screen Sharing is enabled, she can log in and use it as if she were seated at the iMac.
    Provided the iMac's router supports the Bonjour Sleep Proxy (obviously all Apple AirPort Base Stations do), the iMac can even be asleep, and BTMM will wake it upon the router receiving a request to access the iMac.
    The speed of her available Internet connection will be a limiting factor. Slower connections will be a bit laggy.
    Her iMac will appear in a Finder Sidebar, under "Shared".

  • Can I remove a CD Rom from one Mac pro and re-install it in another mac pro

    One mac pro, my computer has a CD ROM that doesn't open and my brother's old Mac Pro has a CD ROM that still opens and closes how easy would it be for me to remove the CD ROM from my brother's old Mac Pro and re-install it in my Mac Pro

    2008 and previous used ATA/IDE DVD Readers.
    2009 and later used SATA DVD Readers.
    You cannot cross the line without changing the cabling, which may be more expensive that just replacing the drive with a new one.
    You both should be sure to update to 10.6.8 if you have not already done so, to provide enhanced malware protection. If you cannot do that, turn off JAVA (not javascript) in all your Browsers.

  • How can I edit a VRO video file in Premiere Pro CC

    I have a VRO video file stored on my windows based pc and would like to edit it with Premiere Pro CC.  How can I get Premiere Pro CC to recognise this file and allow me to edit it?

    Change the extention to vob or mpg maybe that will do the trick,
    or google for the AVS Video Tools VRO Converter.

  • How can I convert an outlook pst file to mac mail without using a windows based computer

    I recently bought the new iMac as my older Windows based computer crashed with a bad motherboard.  I have been trying to find a way to convert Outlook 2007 pst files to Mac Mail without the need to use a Windows based computer since all I have now is a Mac.  I have the copies of the pst files on my Mac, so I am looking for the most efficient way to convert them to the format that I can then open them in the Mac Mail.  Any suggestions would be greatly appreciated.

    Hi - thanks for the instructions but where do you get the option for Quicktime. If I do File - Export I only get the options for File name, place and size but no option that allows to select quicktime:-(
    Have you got any more tips?

  • How can I save or export the file containing stored usernames and passwords?

    I'm about to update my desktop computer's operating system, which will mean my hard drive will be wiped. I want to save any file Firefox might have that contains usernames and passwords so I don't have to rebuild that file once Firefox is reinstalled. I've found such files for extensions and bookmarks but not for passwords.

    In article: http://kb.mozillazine.org/Password_Manager#Backing_up_and_restoring_passwords
    *'''Backing up and restoring passwords '''
    **Firefox '''''3.5 and later versions''''', including current beta and nightly builds, use '''''signons.sqlite'''''.
    *'''Troubleshooting'''
    **Firefox '''''3.5 and later versions''''' use the file '''''signons.sqlite''''' to store the encrypted names and passwords. passwords.
    **You can rename '''''signons.sqlite''''' to signons.sqlite.sav to make Firefox '''''3.5+''''' versions use the file signons#.txt from a previous Firefox 3 or 2 version.
    ***'''''3.5+''''' = same as '''''3.5 and later versions'''''
    Also:
    *http://kb.mozillazine.org/Profile_folder_-_Firefox#Files_and_folders_in_the_profile
    *https://support.mozilla.com/en-US/kb/Backing+up+your+information
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    *http://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    *

  • How can I get data in flat file from Pool table and cluster table ?

    Hi,
    I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
    Is there any tool avilable to download data into flat file from pool table and cluster table ?
    if table name given in the selection screen then data will be downloaded into flat file.
    waiting for quick response.
    Best Regards,
    Bansidhar

    Data cannot be retrived directly form the cluster table
    as the Cluster results are stored in Cluster Key say for example PCLkey
    and form that Key we need to fetch the data
    these clustes are not the part of PNP or PNPCE tables
    for ur info kindly check

  • HOW CAN I SEE MY PORTABLE HD (500GB) ON MAC PRO?

    Hi i just bought my mac pro this is my first mac so i do not know how can i see my PORTABLE HD on mac pro.
    i was using it with my old laplop so all my musics, pics, projects in it. i used allmost 300 gb it.
    when i connect there are choices FIRST AID, ERASE, RAID, RESTORE.
    if choice erase then there is another choices which format i want. if i choice MAC OS EXTENDED (Journaled)
    will I lost all my arcive? musics, pics, etc?
    what is the way does anyone know it?
    how can i open my HD on mac pro?

    If you have files and the disk is formatted for Windows with NTFS then I would invest $19 in Paragon-Software NTFS for OS X which mounts and works well, Apple has limited read-only NTFS support.
    http://www.paragon-software.com/

Maybe you are looking for

  • "itunes 10.5 cannot be opened due to a problem"

    I upgraded to iTunes 10.5 and now it will not open.  Get the following: Can anyone help? iTunes cannot be opened because of a problem. Check with the developer to make sure iTunes works with this version of MAC OS X.  You may need to reinstall the ap

  • Configuring Disk for ASM in a Standalone environment

    Hi, I am attempting to install ASM for the very first time ! I am installing ASM in a Standalone Linux 6 environment. I am following CH3 of the 11gR2 Database Installation Guide. I have installed the Oracle ASM packages and have configured ASM. I am

  • Wrong XML parsing in Java  6.0 , the same code works fine with Java 5.0

    I have the following xml data in a file ( C:\_rf\jrebug.xml ) : <?xml version="1.0" encoding="UTF-8"?> <rs>      <data           input3='aa[1]'           input4='bb[1]'           input6='cc[2]'           input8='dd[7]'           output2='ee[7]'      

  • How to update my ipad 1

    how to update my ipad 1

  • Using Function module HR_INFOTYPE_OPERATION

    Hi folks,         I am using the FM HR_INFOTYPE_OPERATION, in my report. What values i need to pass for the import parameter RECORD. Without passing this parameter, its going to dump...Could any one suggest me how to pass this paramter..or if any sam