How can I tell if my cluster is working?

This seems like a question I should know the answer to, but I set up a quickcluster and can't tell if both machines are actually processing the job or if only one machine is.
In the old version of compressor, I had qmaster in the bar which turned green if it was working.

I should mention that on my laptop (connected via ethernet and both machines are talking to each other), which is the secondary machine, when I open the Share Monitor, it can "see" the batch via the cluster.
It just doesn't really seem like it's doing anything else.

Similar Messages

  • My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

    My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

    The best option is an appointment at an Apple store genius bar.  The evaluation will be for FREE!
    Ciao.

  • [p7-1240] How can I tell which graphics cards will work with my motherboard?

    I recently went through the nightmare of trying to install a Gigabyte GTX 650 in my PC. After a few days of struggling and scouring the internet for answers, I discovered that it is incompatible with the BIOS on my motherboard, and HP does not offer BIOS updates. I returned the card and am now looking for a new one, but I am unsure of which cards will work now, since my computer met all of the system requirements for the graphics card, and It stil ldid not work. Since GPU manufacturers do not list BIOS specs under system requirements, how can I tell if a graphics card will work with my sytem?
    My computer is a p7-1240 with an upgraded 520W PSU and approximeately 11" of room to install the card.
    This question was solved.
    View Solution.

    Thexn, welcome to the forum.
    The problem is, many of the newer video cards require the computer to have a full UEFI BIOS.  HP began using one in mid-October, 2012.  Before this date the BIOS is Legacy.  This is why the video card didn't work with your computer.
    I don't know what you want to spend for a card, but MSI makes a GTX 750ti that has a hybrid VBIOS.  It has a switch to change to Legacy or UEFI.  There is a video link directly below the picture of a card.  Paul from Newegg gives a full description of the card.
    I like EVGA cards the best.  Their Tech Support has given me a lot of information about their cards.  However, you have to go back to a GT 640 card to find one of their cards that doesn't require the UEFI BIOS.  They do have some updates for their BIOS'es that solve the problem, but you have to call them for the exact cards.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How can I tell if Firefox Sync is working?

    I'm not certain Sync is working. How can I check?

    I should mention that on my laptop (connected via ethernet and both machines are talking to each other), which is the secondary machine, when I open the Share Monitor, it can "see" the batch via the cluster.
    It just doesn't really seem like it's doing anything else.

  • How can I tell if the ssd is working properly?

    I suppose to have a 32gb mSata SSD.
    How can I check to see if I have it and how do I check to see if it's functioning properly?

    Hello xmarine, welcome.
    What is the make and model of your HP computer, operating system?
    Let us know,
    Thanks!

  • How can I tell if my ram is working in duel mode?

    I would I be able to tell if ym ram is working in duel mode? My system is in my sig

    You can use CPU-Z. When you boot up look at the post screen, hit the Pause key to, well, pause the process so you can read it. It'll say dual liner mode, I believe.

  • How can we tell if SQL*Loader is working on a TABLE?

    We have a process that requires comparing batches with LDAP information. Instead of using an LDAP lookup tool, we get a nightly directory file, and import the two COLUMNs we want via SQL*Loader (REPLACE) into an IOT. Out of three cases, two just check the first COLUMN, and the third needs the second COLUMN as well.
    We did not think of using External TABLEs, because we cannot store files on the DB server itself.
    The question arises, what to do while the file is being imported. The file is just under 300M, so it takes a minute or so to replace all the data. We found SQL*Loader waits until a transaction is finished before starting, but a query against the TABLE only waits while it is actually importing the data. At the beginning of SQL*Loader's process, however, a query against the TABLE returns no rows.
    The solution we are trying right now is, to have the process that starts SQL*Loader flip a flag in another TABLE denoting that it is unavailable. When it is done, it flips it back, and notes the date. Then, the process that queries the information, exits if the flag is currently 'N'.
    The problem, is, what if SQL*Loader starts inbetween the check of the flag, and the query against the TABLE. How do we guarantee that it is still not being imported.
    I can think of three solutions:
    1) LOCK the ldap information TABLE before checking the flag.
    2) LOCK the record that the process starting SQL*Loader flips.
    3) Add a clause to the query against the TABLE checks that there are records in the TABLE (AND EXISTS(SELECT * FROM ldap_information).
    The problem with 3) is that the process has already tagged the batches (via a COLUMN). It could, technically reset them afterwards, but that seems a bit backwards.

    Just out of curiosity, are you aware that Oracle supplies a DBMS_LDAP package for pulling information from LDAP sources? It would obviously be relatively easy to have a single transaction that deletes the existing data, loads the new data via DBMS_LDAP, and commits, which would get around the problem you're having with SQL*Loader truncating the table.
    You could also have SQL*Loader load the data into a staging table and then have a second process either MERGE the changes from the staging table into the real table (again in a transactionally consistent manner) or just delete and insert the data.
    Justin

  • How can I tell how much heap space is actually in use by a node?

    How can I tell how much heap space is actually in use by a node? If I pass in ...
    set memory=1024m
    set java_opts=%java_opts% -Xms%memory%
    set java_opts=%java_opts% -Xmx%memory%...then memory usage starts high and stays there. I feel like I don't really know how close I'm getting to exhausting my cluster's memory as I insert objects.
    Thanks,
    Andrew

    Hi
    +(With apologies if I am misreading the question and thus answering the wrong one.)+
    [This agent|http://wiki.tangosol.com/display/COH35UG/Provide+a+Data+Grid#ProvideaDataGrid-NodeBasedExecution] reports how much free and total memory is being used on each node in the cluster.
    Regards
    Pete

  • My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

    My ipad does not have the amount of GB on the back and in the settings it says 56gb! Also there is no setting called regulatory. It is an ipad 4 retina w wifi that i got as a Christmas present. Could it be a fake? How can i tell?

    The amount of storage that is shown on the box and in Settings are calculated differently - the package uses 1 billion bytes as a gig (i.e. decimal), whereas in Settings it's shown as the binary definition : http://support.apple.com/kb/TS2419
    Also some space has been used for iOS, the built-in app and some space is lost due to formatting.

  • How can I tell what is "Auto Launching"

    User's (me) tech background:
    Fairly technical user here, but getting pretty rusty. In a past life (late '90s) I was a network administrator as well as server admins for NT 4, Novell (up to 4.11), AIX, and HP-UX servers. Used to be really good at a command prompt ($ or #) in AIX and HP-UX as well as MS DOS. I do have ROOT enabled on my Macs and I am not afraid to use it. However, I know how severe the consequences can be (trashed a customer's AIX server once using a -R switch in the root directory), so I am extremely cautious and must be confident of the instruction. Can probably fix most anything with some guidance........
    Here is the problem........ I have recently developed an error on boot, say within the last couple of weeks, where it tells me that some Vista application won't run because VM Ware will not initialize. The problem is VM Ware is not loaded on this computer (15" MBP model 8.2, i7 processor, 16MB of RAM, OS 10.7.4........ bought as a "refurb", never had a problem, have used this workstation for several months now). Boot Camp is not configured on this machine either. Nothing is in the Dock that would knowingly trigger this. When I go into System Information, I find nothing set as a "Startup Item" (screen shot attached) , making me think that I am looking in the wrong place. Where should I be looking?
    Interesting enough, when I go to System Information, and look under "Applications", I do see a lot of Vista items, including apps from an older MBP that I do not connect to (on same network, they have "rights" to connect, I just never do as there is nothing on there I need). I have attached a screen shot of this as well.
    Please, someone, can you give me some advice here?
    How can I tell where this auto loading of this Vista app is coming from
    How do I get rid of it
    Why did it happen "suddenly"?
    Can I go into System Info/Applications and delete any Vista or VM Ware apps?
    If I cannot do this via "System Info" can I remove (rm OR mv) the files from whichever system directory stores this data?
    This is puzzling and quite concerning. I would be deeply grateful if there is a "Yoda" out there that knows how to fix this.......
    Thanks in advance,
    Bill

        Managing your data usage is very important Bag02231958. I would like to thank ttipgem for the great suggestion to see what is using data on your phone. However, when you access the internet, social media apps, stream data, videos, music, etc. that uses data on your phone. Unfortunately, we do not have a list of what specifically is being accessed on the device to incur data. You do have the ability to view data records and time frames online via My Verizon http://bit.ly/xB4iTc
    Thank You,
    MichelleL_VZW
    VZW Support
    Follow us on Twitter @VZWSUPPORT

  • "Volume not found" I have 3 iphoto_libraries stored in a external disk, while the actual files are in other external disk. Ive moved together iphotolibraries and files but: HOW CAN I TELL THE LIBRARIES WHERE TO FIND THEM NOW?

    I have three iphoto_libraries stored in a external disk PASSPORT (one for each trip imovie Im making -Ive managed this way the libraries so to not confuse the trips) while the actual files are in OTHER external disk LACIE. And everything was fine: imovie find each library, could work with it, or iphoto could edit the files.
    But one day everything crashed at the same time: i opened iphoto to find 3 different scenarios:
    1) iphoto_library GREECE was there, but not the albums i prepared. no events. when double click in any of them: "Volume not found"
    2) iphoto_library ITALY was there, and the albums i prepared too, but empty.
    in both cases I can only see the photos in 'photos'  because 'events'  shows some events with photo preview and some with no preview, just some kind of preset clipart palm tree, but if i enter the event, photos are there but again: when double click in any item: "Volume not found"
    3)  iphoto_library ISRAEL was there, the albums too, when double click in any of them: all OK
    The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT. Also: I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied. Also i have all the movie_libraries in the PASSPORT as well. What happened??
    Solution? Nothing yet. Ive moved now all the photo folders from LACIE together in PASSPORT with the iphotolibraries but problem persist:
    HOW CAN I TELL THE LIBRARIES WHERE TO LOOK FOR THE VOLUMES NOW?
    "Volumes" are the original files aren't them?
    Please help. this is so annoying to try and find in the forum, to tricky to explain
    I have a Macbook pro retina Yosemite 10.10.1 / iphoto 9.6 (910-29)/ iMovie 10.0.6
    THANK YOU
    Vicky

    The 3 libraries was managed the same way. Meaning: Ive imported photos to iphoto from external disk LACIE in a iphotolibrary stored in another external disk PASSPORT.
    This is not clear, especially when you say
    I don't have unchecked the option "copy to file" or something like that. photos where moved, not copied.
    Especially as the message you're getting is typical of a library where the ' option "copy to file" or something like that' is unchecked.
    So it's a simple question:
    Are you these Managed or Referenced Libraries?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

  • How can i tell what computers are authorized with my itunes account?

    My iTunes app tells me that I have 5 computers currently authorized with my account. How can I tell which ones they are???  I've checked all of my old desktops and laptops to deauthorize them but they indicate that they were never authorized.  Confusing. Why go to the trouble managing how many are authorized if you don't provide a means to list them???  I realize that I can deauthorize them all (the only choice!) but, in doing so and reauthorizing the ones I need, does this mean that I lose the ability to access previously purchased music on them??  I must say that, for the ease of use of the Apple apps, I expected more.  Thanks:-) !

    You cannot. You can see the number of authorised machines.
    Go to itunes Store, Select Account from Quick Links on the right.
    If you already have 5 authorised but can't remember which the machines are you have the option of once every 90 days to deauthorize all comuters and then individually reauthorising the ones you want.
    On each machine in iTunes Click Store > Authorise this computer

  • How can you tell if a pic hasnt been tagged by iPhoto, and do you then...

    How can you tell if a pic hasnt been tagged by iPhoto, and do you then do you then have to draw "missing box" around them
    What I mean is tagged a few faces, imported some more pics, checked a few and they dont show as named faces, but are faces that are in my Faces source list (ie identified and named)
    So do I then have to draw a box around known faces to me, and name them again (I think iPhoto will pop up as Im typing the names I already have)
    It just means that even when i import and it doesnt name, I may have lots of pics that are of faces but not tagged and so not in my faces source list
    please help
    cheers
    ps when are Apple going to upload the Getting Started manuals for iLife 09? its been a while since released now, ad they give a bit more insight than the video tutorials alone

    No-one? It'll be nice to know how many pics of faces that arent yet tagged
    cheers

  • How can I tell which apps were purchased on my account?

    I did search for answers but couldn't find one that fit.
    I have an iPhone and so does our son. 
    Early on my son purchased apps on my account and downloaded them on HIS iphone.  Eventually, I got him his own iPhone account and so he has also purchsed apps on his own account and downloaded them on his phone. 
    When we open iTunes and connect his phone, there is a list of apps that are on his phone.
    QUESTION
    How can we tell which apps were purchased on HIS iTunes acct and which were purchased on MY iTunes acct? 
    I don't want to DO anything with the apps, I just want to know one from another. 
    Thanks in advance!!

    List of authorized computers - https://discussions.apple.com/thread/4090165 - there isn't one.

  • How can you tell if a file is being used in your project or not?

    How can you tell if a file in your bin is being used in your project or not? My director dragged hundreds of reference files into my project and only used a few of them. I'd like to do some house cleaning and delete the ones that are not in use. This project file has 100 sequences in it, so it would be a tough manual hunt to figure this out.
    In Premiere Pro (or Flash for example), where all the information is in the Project Bin such as in/out times and duration, there is where it tells you how many times that piece of media has been used or if it hasn't been used yet.
    Can FCP tell me this info?
    Thanks for yout time!
    -Monty

    Monty,
    Within FCP, there is a menu item called "Media Manager" (depending on what version you are in). This would be worth your while to look into. It basically organizes your project by moving/archiving any used assets of a project and leaving out un-used assets. It saves a ton of disk space.
    For example, say you have a 5 minute clip with an in/out point that is just 30 seconds. Media Manager will "archive" just that 30 seconds, not the entire clip. There is even a setting that you can add additional "handles" time to the front andd back of the clip if you think you may need to add or change transition.
    Do a google search. I was just watching a few Youtube videos on this myself.
    Jonathan

Maybe you are looking for