How can i test if the frame is created

hi,
i am using ADFBC Swing.
i have created an MDI Frame and 2 internals frames.
in the MDI frame i put a button and i want when i press it i do a test.
if the internal frame1 is created i unload it and i create the 2.
else if the second is created i do nothing
thanks

nothing.
All sales are final

Similar Messages

How can I test for the bas unit enterd in a control?

How can I to create a polymorphic vi where the user can enter either volume or temperature.
how can Labwiev test for the base unit entered
pseudocode example:
input X
if X.base_unit == m^3 do .......
thanks for any suggestion to resolve or avoid my problem
Solved!
Go to Solution.

Hi schaerm,
you have to dig deeper.
An idea is this one:
The red marked word is containing the unit - in a coded way. Somewhere in the LV help you can find the description of this coding (I remember a chapter on memory representations of all LV datatypes...). (There surely is an easier or better way - but the example is done quic&dirty.)
You can also format the number into a string and analyze the unit here...
Message Edited by GerdW on 02-07-2010 07:21 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I test that the ITS is setup right and working?.

How can I test that the ITS is setup right and working?.
At present when calling a CRM transaction (BOR object) via the Nav Bar of the Webclient IC I am getting a message box with the title of 'Message from Webpage' and the content saying 'Object expected'.
I have re-checked the transaction launcher and navigation bar profile setting and these look okay, hence my question regarding the ITS and how we might test that its functional.
Jason

I assume that as I also have a call to a URL (website), which is working fine, then the ITS servicer is also working fine.
That just leads me to know identify why my BOR object is not being called correctly.
Within the Transaction launcher I have the following settings:
Entries
Launch Trans ID: ZZIC1_LT01
Component set: ALL
Technical details
Description: xxxxx
Class name: ZCL_ZZIC1_LT01
Statefull: X
Further Technical details
Transaction type: BOR Transaction
Logical system: CMDCLNT600
BOR Object type: TSTC_UIF
Method name: EXECUTE
Transaction Parameters
Parameter: Object_key
Value: CRMD_BUS2000115
Can anyone see any problems with these entries?.
what's the best way to ensure that 'CRMD_BUS2000115' is a BOR object?. I can run it as a transaction.
Jason

How can I give me the access to create a developer key in the market?

Hi!
I'm new in the basis area and I don't have access to create a developer key. A consultant need a developer key.
How can I give me the access in the market place to create it?
Thanks!

Hi
You need to get the access key from SAP.
Refer to the procedure of obtaining access keys from SAP in BASIS.
Security
Regards,
Raj

How can I desactivate the frame of an indicator? Thanks

Hi everyone,
1) I don’t know how I can desactivate the frame of the indicator in the VI I have attached. I have set the background to transparent, but it still appears. Infact I would like it to appear exactly as the label on its right. How can I do this? 2) How can I set the position of on object like the arrow in the VI? For instance I would like the arrow to move from left to right every second. But I can’t find propriety node for those kind of graphic objects that would enable me to change the position of the arrow on the FP. Would anybody know? 3) In the same VI I have also attached an indicator jauge made of 2 arrows that symbolises the position of a valve in a duct. I am not pleased with the way it looks, any idea how I can make the arrows thiner? The best result for me would be to have just a bar that can change position between a horizontal, a vertical and intermediate positions. Thanks a lot for your tips, Best regrads, Marc XP & Labviw 8.5
Solved!
Go to Solution.
Attachments:
Forum.vi ‏10 KB

HI
I have attached the Vi. Hope this may help you. I am not sure this is your requirement.
Message Edited by AutoTEC on 10-13-2008 01:59 AM
Attachments:
RE-Forum[1].vi ‏14 KB

How can i avoid displaying the frame

Hi,
I am creating a graphical chart called windrose in a frame. I am converting the figure generated into an image file from the frame and then this image file will be called by a servlet. I would like to know if there is anyway that I can avoid the window that displays the frame. If I set the setvisible as false, the image is not being created. Please let me know if anyone has dealt with it before.
Thanks,
Kiran Jangam
[email protected]

I believe you want to use Window rather than Frame.

How can i automatically change the frame size

hello everyone and have a nice week!
I have diary with many text frames per page and i want to change the frame size automatically on some of them because i change the font size. I tried find/change but on the object section there is everything but the frames size.
I hope someone has the answer to that otherwise its hours of work...

Frame fitting only works onthe last frame in a threaded set. I'm not sure that the auto fit feature in CS6 would help, either.
I'm not sure that I understand what it is you are doing, now that you've said the frames are threaded. Can you give us more of an explanation, perhaps some screen shots (blur the text if it's too personal, or add placeholder text for a sample).

How can find what are the customers are created in my earlier version.

Hi all,I am trying to find out how can I check the what are the customers are created in my earlier version of sap (i.e 4.7B)
My client Upgrade d the 5.0 in 2007. Now my client asking, list of WDs which are created in the 4.7B.

Hi,
You know when the SAP went live with the new version.
In t.code SE16, enter table name KNA1.
In the field created on put value of new SAP version go-live date and select a < symbol by double clicking the field. Then click on execute button, the system will provide the customer master created before the new version go-live date.
Regards,

Have been given a LR5 DVD. How can I check if the serial number has been used before? (Was: Lightroom)

I Have a Lightroom been given 5 DVD,
and they want to sell, how can I test if the serial number has been entered before

If you never bought the product then you cannot get the serial number.

How can I test my thunderbolt port? It's not working after the update to 10.10.1

I have been using my computer with the Thunderbolt Port for a while and after updating to 10.10.1 and after I while of using my computer I tried to use the thunderbolt port with my external monitor.. and it doesn't work at all.. video doesn't come out.. I tried a different screen with the mini adapter from thunderbolt to HDMI and another with thunderbolt to VGA and in both adapters I don't get video from my mac.
Any idea how can I test my Thunder bolt port?
This is what I have done:
1 cable adapter thunder bolt to mini HDMI to an LCD screen with HDMI : No video, but my computer detects that there is something connected
2 cable adapter thunder bolt to VGA to an LCD screen with VGA : No video, but my computer detects that there is something connected
3 cable adapter thunder bolt to mini HDMI to an 40' TV with HDMI : No video, but my computer detects that there is something connected
All the test pass from the Hardware test at the startup (press D at boot time).
Any ideas? my guarantee it's expired and no coverage. Due the nature of where the port it's installed, if this is a hardware problem seems that I will (may be) have to buy the Logic Board.. no good. No bueno!!
Thanks!!!

restore iPhone

How can I test a RTP(send&receive) application on the same computer?

I an writing an application that lets one computer (A) sends a media file to another computer (B) and B receives it and play it.
But how can I test this application on the same computer
Eg.Transmitter: localhost 43000
Receiver: localhost 43000
It will retuen an error since the port number is alreeady used by another program.
I know if I test it on different computers, it should be fine, but how can I test it on the same computer?

JMStudio sends RTP packets from the same UDP port as the specified in the destination port, so you can't try it in the same computer. The examples provided in http://java.sun.com/products/java-media/jmf/2.1.1/solutions/index.html follow this rule aswell, but it's easy to modify it:
rtpMgrs[streamid]=RTPManager.newInstance();
localAddr = new SessionAddress( InetAddress.getLocalHost(),localDataPort);
//By deafault, in the examples, they use remote DataPort instead of localDataPort.
//You can specify localDataPort to any different free port number, or to
//SessionAddress.ANY_PORT if you don't mind the port number
remoteAddr = new SessionAddress(destIpAddr,remoteDataPort);
rtpMgrs[streamid].initialize(localAddr);
rtpMgrs[streamid].addTarget(remoteAddr);

How can you test the video card?

I just got a cinema display and I am having trouble calibrating it.
I just notice that when I open up bridge CS4 it takes awhile for it to refresh. When I go to film strip view and click on a picture it will not diplay it.
Then I change views and there is a line down the middle of the display where it gets update but the left side does not.
Any thoughts on what it could be?
Video card of is it the monitor?
How can I test it?

The only ways I can think of to test the card are XBench and the Apple Hardware Tests (insert Install DVD and restart while holding down 'd')

How can I print a full frame photo from iPhoto 11? Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up. I have an Epson R1800 with the latest drivers.

How can I print a full frame photo from iPhoto 11? Even though I click on scale to fit paper size, it crops both ends of the photo in landscape set up. I have an Epson R1800 with the latest drivers. (I'm also 3 days new to iMac and iPhoto 11 from an eMac and iPhoto 6.)

" Hello Jeff. Here at Oki Data, we do not support programming. I would recommend contacting Adobe for further assistance. You can also browse their website at http://www.adobe.com/products/postscript/.

How can i test if i'm in the EOF of my file text in applescript?

hello
i want to known how can i test my EOF of my file text or if i meet "Plan N°" when i read each linesdxhezdcxezkchcochzhejc
my file text :
Plan N°1
94.64%
MDF_280;;3050;1850;1
piece;0;0;500;500;0;AAA
piece;0;504;500;500;0;AAA
piece;0;1008;500;500;0;AAA
piece;0;1512;500;500;0;AAA
piece;0;2016;500;500;0;AAA
piece;0;2520;500;500;0;AAA
chute;0;3024;26;500
piece;504;0;500;500;0;AAA
piece;504;504;500;500;0;AAA
piece;504;1008;500;500;0;AAA
piece;504;1512;500;500;0;AAA
piece;504;2016;500;500;0;AAA
piece;504;2520;500;500;0;AAA
chute;504;3024;26;500
piece;1008;0;500;500;0;AAA
piece;1008;504;500;500;0;AAA
piece;1008;1008;500;500;0;AAA
piece;1008;1512;500;500;0;AAA
piece;1008;2016;500;500;0;AAA
piece;1008;2520;500;500;0;AAA
chute;1008;3024;26;500
piece;1512;0;700;300;1;BBB
piece;1512;704;700;300;1;BBB
piece;1512;1408;700;300;1;BBB
piece;1512;2112;700;300;1;BBB
chute;1512;2816;234;300
chute;1816;0;3050;34
Plan N°2
93.58%
MDF_280;;3050;1850;1
piece;0;0;300;700;0;BBB
piece;0;304;300;700;0;BBB
piece;0;608;300;700;0;BBB
i want test
i : line 1 ok next
i <- 94... ok -< next
if i == MDF_280 => loop (exit while EOF or when i == Plan N°)
do ....
end loop
soory but i'm novice in apple script
and i'm french
i need to improve my english
this is my applescript
repeat with l in lesLignes
if (l as text) starts with "MDF_280" then
while ???? (!= EOF or "MDF_280") do ....
if (l as text) starts with "piece" then .....
end if
end if
end repeat
THANKS

property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, exit repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
display dialog tmpText -- Display obtain subset of content of 'tText'.
end repeat
Since you posted 'how can i read a file text by applescript', and have not replied to others posts; nor marked any reply as 'answered' or even 'helpful'; and, I anticipate you creating a new post asking how to incorporate one of the 'how can i read a file text by applescript' replies into the above (or similar) code - a revised version of 'how can i read a file text by applescript' incorporated within the above code is provided below.
property sString01 : "Plan N" -- String to search for.
property sString02 : "MDF_280" -- String to search for.
property sString03 : "piece" -- String to search for.
property sString04 : "chute" -- String to search for.
set uFile to (choose file) -- Select file to process.
set tText to read uFile -- Read contents of selected file.
repeat -- Cycle through contents of 'tText'.
set {offset01, offset02} to {offset of sString01 in tText, offset of sString02 in tText} -- Obtain offset locations of 'sString01' and 'sString02'.
if (offset01 = 0) then exit repeat -- If 'sString01' does not exist, then exit the repeat loop.
-- Adjust content of 'tText' as to position of 'offset02' relative to 'offset01'.
if (offset02 > offset01) then set tText to get (characters (offset02 + (count sString02)) through (count tText) of tText) as string
set offset01 to (offset of sString01 in tText) - 1 -- Obtain next offset of 'String01'.
if (offset01 < 1) then set offset01 to (count tText) -- Correct 'offset01' to obtain remaining contents of 'tText'.
set tmpText to get (characters 1 through offset01 of tText) as string -- Obtain subset content of 'tText' - between 'sString02' and next 'sString01', of end of 'tText'.
set tPars to paragraphs of tmpText -- Obtain list of 'piece' entries.
repeat with i in tPars -- Cycle through list.
if (i begins with sString03) then
set {var01, var02, var03, var04, var05, var06} to my handle_List(i) -- Obtain individual values.
-- Your code here.
display dialog ("Piece: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04 & " ... " & var05 & " ... " & var06) -- Code sample.
else if (i begins with sString04) then
set {var01, var02, var03, var04} to my handle_List(i)
-- Your code here.
display dialog ("Chute: " & var01 & " ... " & var02 & " ... " & var03 & " ... " & var04) -- Code sample.
end if
end repeat
end repeat
on handle_List(localList) -- Extract values, from each line of data, and place into a list.
set {oAStid, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ";"}
set tItems to text items 2 through -1 of localList
set AppleScript's text item delimiters to oAStid
return tItems -- Return a list of values.
end handle_List

How can I test the HBA driver?

Hi. I'm a graduate student majoring in Computer Science.
I'm interested in writing driver drivers, especially SCSI driver driver. I modified HBA driver and compiled. but I don't know how to test it
To my thinking because HBA driver is automatically loaded when boot, I can't replace it with my driver. Is it right?
How can I test it ? Is kenel compiled with new driver???
Thank you in advance.

HBA driver is a loadable module and it is HBA-specific, i.e. it is written for a particular type of the controller hardware. It is not clear, if you have modified a driver for you boot device controller of some other HBA. Do not replace your original driver used for booting - you may not boot you system! You may add to your system the HBA for which your new driver is written and then debug it on a live system.
You will find a lot of information about driver development and debugging in the on-line manual "Writing Device Drivers" posted on http://soldc.sun.com/developer/support/driver/IO_kit/PCI.html web page.

How can i test if the frame is created

Similar Messages

Maybe you are looking for