How can I turn OFF audio monitoring during capture from tape?

FCP has a very useful check box that allows you to turn off audio monitoring during capture, so you can listen to other things whilst the batch captures.  Is there any way to do this in PP?  If not, how can I make a feature request?
I'm using PP CS6.
Thanks for any help.
Dominic

The only other solution I can offer is to go to "edit" "preferences" then select "playback". Under playback set the default audio device to your capturing device instead of the adobe desktop audio. This will allow you capture but not have to listen to whats being captured. However once it's done capturing you'll have to set it back to adobe desktop audio otherwise you can't hear what you're editing in your timeline.
Other than that I'm out of ideas sorry.

Similar Messages

  • How can I turn off the phone saying "Call from" #/name when getting incoming call.

    How can I turn off the phone saying "Call from" #/name when getting incoming call before the ring tone starts?  I have a LG accolade

    I recommend checking your  prompts and alerts to turn this feature off. This may be you "Call Connect" or "Readout" alerts. Listed below are steps to update this feature. 
    With the flip open, press the Voice Command Key (on the left side of the phone).The Voice Commands feature has several settings which allow you to customize how you want to use it. Access Voice Commands, then press the Right Soft Key[Settings]. Your choices are below:
    -Confirm Choices--- Automatic/Always Confirm/ Never Confirm
    -Sensitivity--- Control the sensitivity as More Sensitive/ Automatic/Less Sensitive
    -Adapt Voice ---If the phone often asks you to repeat voice command,train the phone to recognize your voice patterns.Train Words/ Train Digits
    Prompts ---Mode/ Audio Playback/Timeout
    * For Mode, set Prompts/ Readout+ Alerts/ Readout/ Tones Only.
    * For Audio Playback, set Speakerphone or Earpiece.
    * For Timeout, set 5 seconds or 10seconds.

  • Turning OFF Audio Playback during capture?

    When capturing a tape from my video camera in Premiere Pro, How do I turn off the audio playback while recording?
    I want to record the audio and the video, but I don't want to hear the tape's audio playing back through my computer speakers while recording. The technician I spoke to over the phone was extremely unhelpful and suggested I simply mute my computer speakers if I don't want to hear it. What if I want to listen to music or am trying to watch another video file in a different program without having to hear the premiere pro audio blaring over it. Please someone tell me the rude technician I spoke to did not understand clearly what I was asking and if anyone knows how to accomplish this or can shed anymore light on the topic.
    I just spent 40 minutes on the phone with an adobe tech support rep who took 40 minutes to correctly understand the issue I was calling for and then informed me that the functionality does not exist within the premiere pro software. Sorry if this comes off as a little edgy, but my tech "support" call was extremely frustrating and now to find that premiere pro wont let you listen to anything in any other program while recording seems a little rediculous.
    Thanks,

    It is risky to run other applications while capturing footage.  May lead to dropped frames.  I have found that Premiere is a resource hog and more likely to have this problem than other capture programs.  Not that Premiere is a bad program for capture, but you might find an alternative that provides a better solution for your specific need.
    It has been a few years since using Scenalyzer, but I always found that program to be extremely reliable and flexible.  And it has the capability of silencing the audio during capture.  Since you didn't say what format you are capturing I can't say whether Scenalyzer will work for you.  Check it out.
    I don't think Harm was being condesending at all.  He is simply warning you about the potential problems your system may face by attempting to multi-task in the manner you describe.  It's up to you to decide if you want to follow the advice you seek here.
    Good luck

  • How can I turn off iMessage on my iPhone from my Mac?

    My iPhone recently broke and I was forced to get an android (I absolutely hate it) I don't have an upgrade till June/October of next year so I'm stuck with this terrible phone for awhile. However I can't recieve texts from people with iPhones because it is sending them as iMessages, how can I turn iMessage off so I can recieve texts?

    Try this:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "Edit Products"
    Click on the "X" to the right of the product.
    Click "Unregister"

  • How can I turn off the monitor but not the computer on my touchsmart 310..

    I leave my computer on at night to keep wireless network going, but I want to turn off just the monitor. All of the advice I've seen is to turn off the touchscreen feature -not the monitor itself. Thank you.

    You can set the timing for the display to turn off.
    Try this:
    Click:
    Start.
    Control Panel.
    Hardware and Sound.
    Power Options.
    On the left bar you'll find Choose when to turn off the display. 
    At Turn off the display:  there is a drop dowm menu to choose the number of minutes before the display turns off.  Make your selection.
    Try that and see if it works for you.
    I hope this is what you were looking for,
    GeorgeFN
    GeorgeFN
    I work on behalf of HP.

  • How can I turn OFF my Yahoo email password from Firefox memory. since it was hacked last week.

    Some time ago I let Firefox remember my Yahoo email username and password. Last week someone hacked into my Yahoo email account and used my email address list to send out lots of yucky spam to them. I have changed my Yahoo password, but now, just for safety's sake, I want to have that password blank whenever I sign in. How do I toggle the Firefox memory OFF so that it doesn't remember my new Yahoo name and password? I would prefer to log that name and password in myself from now on.

    I'm back on Firefox 13.01 and the webmail and Yahoo Home page appear to be sorted.
    From another similar problem, I learned that going into Tool/Options - Network Settings, and changing the proxy setting from AutoDetect Proxy to Use System Proxy, or No Proxy gets rid of the password pop-up problem.
    I've been using 13.01 for the last 10 minutes or so, with Yahoo as my home page, and I've ended and started FF five or six times, and each time, my it went straight to my homepage without requesting a password. E-mail looks to be working fine as well.

  • How can I turn off the share link feature from the 'open link' menu?

    Longpressing a link in firefox opens a menu.
    I want to remove the "share link" thing from this menu, as that is something I'd NEVER do.
    It's highly intrusive and gets in the way with it's "prime" position at the top of the list.
    Couldn't find any flag in about:config or anywhere. Going to take a look at google-chrome now, see if that thing is better. I'll miss adblock.

    Hi t.rei,
    Thank you for your feedback. Please also include this in input.mozilla.org where the User Advocacy team lobbies features from gathered feedback.
    Unfortunately I do not have a work around for this feature.

  • How can I turn off privacy settings in safari

    How can I turn off privacy settings in safari?

    Tap  "Private" on the Safari Screen. The top of screen will turn white if it is off.
    http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

  • Multibridge Pro no audio monitoring during capture

    I cannot get audio monitoring during capture, from betacam (component) or dv, I tried everything I can think of, does anybody else is running to the same problem?
    (running mac pro, plenty of ram, Os version 10.5.2, decklink software 6.6.2, FCP 6.0.2)
    Thanks for any suggestions.

    I tried to reboot the multibridge many but to no avail. Regarding the monitoring, I do not really care about monitoring the upload, but I want to be able to log the clip via final cut, and it should work, however it does not.
    Also I wanted to know if users of the multibridge have issues with the video levels? I just switch from a HD Decklink card and the difference in level is not right, the multibridge is much to bright. Any suggestions?

  • How can I turn off the sound from the original midi  or audio tracks when I turned on the duplicate tracks for editing ?

    How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
    I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

    Dan,
    It sounds like one of your preferences has changed.
    Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
    This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
    One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
    Hope that helps

  • I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset?

    I am using earphones, but the external audio of my mini ipad is still on. How can I turn off the external audio while listening with my headset/earphones?

    Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

  • How can I turn off access to the internet at scheduled times?

    how can I turn off access to the internet at scheduled times? I use an Airport extreme and several units to extend the range. Kids have multiple devices that I don't want on the network at certain hours. On the other hand, ideally, my wife and I would like to be able to access the internet with our devices after the kid's bedtime and during their school study time.

    http://www.macobserver.com/tmo/article/airport_utility_setting_wireless_time_lim its

  • How can I turn off the transition effect in Spaces?  - It's making me sick!

    How can I turn off the transition effect in Spaces?
    Can I do this through the terminal somehow?
    I have three monitors and the transition effect is giving me motion sickness.

    Hi,
    I'm afraid there does not appear to be anyway of turning off the sliding transition in spaces. There's no option to turn it off or to change it to another effect.
    I use spaces all the time as I have a 15" MacBook Pro and it's incredibly useful to have a screen dedicated to e-mail and IM and another for Safari and two other screens for applications. There's just not enough screen real estate for all those windows. I think Spaces is one of the most useful user features of Mac OS X.
    Maybe we should send in a feature request to Apple? I used to use some third party software to do the same before Spaces was released and it had a selection of transitions or none at all.
    Personally, I'm now used to the transitions but as I don't have multiple monitors perhaps I'm being spared the motion sickness!
    Good luck.
    Andy E

  • How can I turn off the FileVault?

    How can I turn off the FileVault? It keeps saying 'Encryption paused', even I connected the power adapter.
    What impacts does it have on my Macbook Pro if I cannot turn off the FileVault?
    Thank you!

    If you don't already have a current backup of all data, back up before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
    In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
    Then, from the menu bar, select
              File ▹ Turn Off Encryption
    Enter the password again.
    You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
    If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
              Mac OS Extended (Journaled)
    from the Format menu.
    You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
    Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

  • How can I turn off the WLS 6.1 security in order to develop my own application-based security module?

    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit our company's needs.
    The security requirements are that, users' password need to be aged (30 days maximum) and we need to provided a GUI front-end (JSP) to allow users to change their password when these expire after 30 days.
    Our internal contacts in the company, have already taken the lead to find out about whether we will be able to use the WLS 6.1 platform to do this and the answer we got back, was.
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our own application-based security module?
    2. How can we develop a security module that allows us to age users' password and provide them with facilities to change their passwords when these expire?
    At the moment, we are using the default BEA WebLogic login.jsp page and there some configuration in the web.xml for this. I will be grateful if you could advise me on how to turn this default security off so that we can write our own security module.

    hi,
    1.You can write your own realm in 61 which can plugged for your security
    calls.
    2. once you write your ownrealm.. you can access it through weblogic
    api/ur api..
    thanks
    kiran
    "Richard Koudry" <[email protected]> wrote in message
    news:3dd0d081$[email protected]..
    Dear Colleagues,
    I am currently developing a J2EE application using WLS 6.1.
    My team and I have to implement a security requirement to suit ourcompany's needs.
    >
    The security requirements are that, users' password need to be aged (30days maximum) and we need to provided a GUI front-end (JSP) to allow users
    to change their password when these expire after 30 days.
    >
    Our internal contacts in the company, have already taken the lead to findout about whether we will be able to use the WLS 6.1 platform to do this and
    the answer we got back, was.
    >
    Now we need to develop our own security module.
    I have 2 questions:
    1. How can we turn off the WLS security in order develop our ownapplication-based security module?
    >
    2. How can we develop a security module that allows us to age users'password and provide them with facilities to change their passwords when
    these expire?
    >
    At the moment, we are using the default BEA WebLogic login.jsp page andthere some configuration in the web.xml for this. I will be grateful if you
    could advise me on how to turn this default security off so that we can
    write our own security module.

Maybe you are looking for