How can I upgrade from Final Cut Pro X 10.0.4  to 10.0.7

I need to upgrade from Final Cut Pro X 10.0.4 to 10.0.7 but can not find how to do this. Can anybody help?
Thanks.

     You might do some web searching on "FCPx  torrent ".  I would think that if you have a legitimate copy of FCPx there would be no legal/moral issue with pulling down a 10.0.7 version via bittorrent, but I'm not a lawyer. And of course there are other issues relating to such software but as Tom implies, you can't get an older version from Apple so you'll have to find somebody, somewhere with a 10.0.7 copy that you can install.

Similar Messages

  • How do I upgrade from Final Cut Pro 4.0 to 4.5

    How do I upgrade from Final Cut Pro 4.0 to 4.5?
    Please Help
    Leo

    Hi
    I got sorted apparently I had a recipt for the orignal 4.5 upgrade and this prevented the software updater looking for Final Cut Pro 4.5
    solution: I opened Library and went to Receipts and found FinalCutProHD4.5.Pkg I deleted this then I went to software update and bingo problem solved?
    thanks anyway
    Leo

  • Can you upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with upgrade?

    Does anyone know if you can upgrade from Final Cut Pro 3 to Final Cut Pro Sudio 2 with $699 upgrade?
    I purchased Final Cut Pro 2 years back and then purchased the Final Cut Pro 3 upgrade. I have not used it in years, but now I want to upgrade to Final Cut Studio 2. Is this possible by just purchasing the upgrade?

    Apple's web page has the requirements:
    http://store.apple.com/AppleStore/WebObjects/BizCustom?qprm=78313&productLearnMo re=MA886Z/A
    The $699.00 upgrade version requires a valid serial number from a commercial version of Final Cut Studio, Production Suite, or Final Cut Pro 1, 2, 3, 4, or 5. Academic and not-for-resale versions are not eligible for this upgrade.

  • Can I upgrade from Final Cut Pro 6 to Final Cut Pro X?

    HI,
    I am trying to budget up expenses to upgrade both of these machines. Unfortunately, I sense that I have to scrap my G-5 Pre-Intel
    tower for one that is Intel, and can go through the Lion phase, as will my Macbook Pro laptop.   I have been pretty skimpy by only
    upgrading Photoshop (CS 4) and Final Cut Pro (6.06; though I have the entire suite from 2007), and may have to continue doing so unless I can
    imagine buying the entire Adobe Creative Suite, Microsoft Office, and the entire FCP suite as well. I know that I can upgrade on the Photoshop from 4-6 but I am not finding anything that tells me that I can upgrade FCP from 6-X. 
    Any comments?

    There is no upgrade from FCP6/7 to X.  You have to either stay with 7 or buy X for $299.  Either way, an upgrade woud cost the same.
    Trust me, X is well worth it and I dont miss 7 one bit.

  • How to import project from Final cut pro 7 to X ?

    how to import project from Final Cut Pro 7 to X ?

    please tell me if FCP 7can create any kind of file that FCP X can read ?
    I can read FCP 7 .mov file with QuickTime, but not with FCP X ? what can I do ?
    Sould I use a Premiere on PC to make files compatibles in between 2 apple Softwares ?
    I have a lot a files that have been created with FCP 7 and I just buy FCP X , so I am Stuck !!!
    thank you in advance

  • Can I jump from Final Cut Pro 6 directly to X?

    Can I jump from Final Cut Pro 6 directly to X?

    larryb_denver wrote:
    Can I jump from Final Cut Pro 6 directly to X?
    Sure...
    Jumping from FCP6 directly  to FCPX looks a little somthin like this:
    http://www.youtube.com/watch?v=CLfAhhAVBjE&feature=related

  • How can I convert my Final Cut Pro 5 projects to Final Cut Pro X using XML via 7 to X?

    I have been using Final Cut Pro 5 for years and I was considering upgrading to FINAL CUT PRO X.  But I soon learned about the compatibility issues which leaves me with a bit of a dilemma.  Then I learned about 7 to X, which apparently can convert FCP7 projects via XML to FCPX.  That made me wonder if I can XML all my FCP 5 projects and have FCPX open them.  Is this possible?

    Best to post this question in the FCPX forum.
    x

  • How do I upgrade from final cut 5.1 to final cut 5.1.4?

    I wanted to upgrade from final cut studio 5.1 to 5.1.4 because it doesn't recognise my camera JVC HD111E or the format I have used 730p 25 frame. 5.1 codecs are extremely limited. However my Mac doesn't see that I need this update when I go to software update. Downloaded it from idisk public folder after advice from apple support but this won't install. Have tried other ways such as buying a Lumiere HD plug in but this doesn't work either. Please help!

    Welcome to the discussions, saiga. From Wales, eh? Lovely country, that.
    You've registered the software, right? And you've not moved any programs or renamed them? Have you tried re-installing FCP?
    Patrick

  • Upgrading From Final Cut Pro 5 to 6 - can you use full install disk?

    Hi,
    I have one MacBook Pro running Final Cut 6 (with Final Cut Studio 2), and another one running Final Cut Pro 5 (with Final Cut Studio). We're looking to upgrade the second one to Final Cut Studio 2.
    Does anyone know if the upgrade can be done with the disks from the full install box of Studio 2, using the product key from an upgrade? We happen to be in the middle of East Africa at the moment, so shipping is an issue...
    Thanks

    You CAN install Final Cut Studio with only the upgrade disk set BUT you will need the product key for BOTH the Final Cut Studio 2 AND the previous version.
    After you insert the Final Cut Studio 2 upgrade installation disk you will first be asked to input the product key for the upgrade version and then after you will be requested for the product key of the previous version.
    After this, the installation process does NOT require any disks from the previous version of Final Cut Studio.

  • HT1338 how can I upgrade my final cut express 4 to final cut pro?

    Can I update my Final Cut Express 4 to the current version?

    If you have questions about or are having difficulties with FCP, I'd suggest you start a new topic in the Final Cut Pro forum rather than posting in someone else's year-old thread.
    Final Cut Pro is by no means "amateur". It's used by many professional editors of feature films. So either you got Final Cut Express, or you just haven't discovered how to use all the features. Again, the FCP forum can help.
    Regards.

  • HELP PLEASE WITH UPGRADING FROM FINAL CUT PRO TO FINAL CUT STUDIO 2

    I HAVE BEEN TRYING TO UPDATE FINAL CUT AND GETTING THE FOLLOWING MESSAGE
    Final Cut Pro and Boris Calligraphy titling generator. Upgrading is required if an older version is already installed.
    SO WHEN I GO TO UPDATE FINAL CUT AND COMPRESSOR ARE GREYED OUT AND SAY SKIP SO I AM UNABLE TO UPGRADE. I HAVE UPDATED ALL MY SOFTWARE AND AM STUCK.
    IF ANYONE CAN PLEASE HELP
    THANK YOU

    1. Turn off caps lock on your keyboard.
    2. Use Carbon Copy Cloner or SuperDuper to clone your internal hard drive.
    3. Use the Installation disks that came wiith your computer to Erase and Install Mac OS X on your internal hard drive. Use Software Update to get your copy of Mac OS to the latest version.
    4. Repair Permissions.
    5. Install Final Cut Studio. Use Software Update to get your copy of Final Cut Studio to the latest version.
    6. Repair Permissions.
    7. Use the cloned hard drive to restore the contents of your Home folder -do not copy the contents of your Library folder, only the folder "Mail" should be copied from there to your new Home/Library folder.

  • How can i uninstall the final cut pro x trial version after installing final cut pro x

    How can I unintall the trial version of the final cut pro x after installing the new updated final cut pro x 10.2

    I have the same issue. There are now two version of FCP X: the trial one and the purchased one. Problem is, the first hasn't been overwritten by the second, and all my projects are only visible on Final Cut Pro X Trial, and nothing on FCP X.
    How and where do I get a fast answer from customer support?
    Thank you

  • I can't upload from Final Cut Pro.

    So I just got FCP and I can't upload videos from FCP X. Every time I put my YouTube details in it doesn't work and it says "NoLinkedYouTubeAccount".
    I have changed my password and have also logined in my YouTube account on Safari and Firefox.
    I have read lots of suggests and still it doesn't work. I have Final Cut Pro version 10.0.9. If that helps.

    Peu2600 wrote:
    What do you mean by the second sentence?
    Tiff
    Log on to You Tube. Upload the file using their uploader.
    (What you're running into is most likely an account issue with YT – not with FCP.)
    Russ

  • Upgrade from Final Cut Pro HD 4.5 ??

    I bought my PB used about 3 years ago. It came with a lot of application some I still haven't used. I noticed that I also have Final Cut Pro HD 4.5 . Is there an upgrade to this software and if so which one? I saw a lot of different kinds. Since Im a noob to the software is there any books or websites that can help me to start using this program? Thanks

    Pop the FCS 2 install disk in your drive. When you run the installer it will ask for the FCS 2 serial #. This is the number on the front of the document "Installing Your Software"
    It will then prompt that the serial is an upgrade #. Enter the serial of your full version -in this case, the number that came with FCP 4.5 HD.
    Install the FCS suite and enjoy.
    Apple Discussions tip: I think it is fantastic that you have used the search function of AD to find a related issue. Kudos.
    But... If you tag your question onto the end of an older discussion, it will receive less attention.
    Particularly if the discussion has already been marked as solved. In this case, please feel free to use the "Post New Topic" button at the top left of the main FCP page.
    Welcome to Apple Discussions!
    Message was edited by: Sir Basil Rathbone

  • Does Anyone know how to remove iPhoto from Final Cut Pro X.

    I am trying to remove iPhoto from the Effects bar in Final Cut Pro X.

    Perhaps you best ask that on the Final Cut Pro X forum here:
    Final Cut Pro X

Maybe you are looking for

  • Satellite L770 - I cannot find an adobepdf.dll

    Hello I've just taken delivery of a L770 laptop and am now busy installing my programs. Adobe Acrobat Professional v8.00 asks for adobepdf.dll to be installed from the Windows Vista CD-Rom, which I don't have because this laptop has Windows 7 Home ed

  • Automatically open movies in Quicktime Full Screen

    I know that if I open a movie file in Quicktime I can go to to: window/show movie properties/presentation/enter full screen mode when opened & then the movie will start on full screen when i play it. But how can i avoid this step if i want all movies

  • I have a thin black line across the middle of my iMac 24"

    I have resored, still there.  any ideas?

  • Problem in using Currency Field in EXTRACTOR

    hello,         I have a requirement to create Extractor involving some fields from a Ztable. While creating extractor (data source) in RSO2 transaction, when i enter the Z table name in "Extraction from DB view - View/Table" and click on SAVE, i get

  • How do I get rid of Mobile Me icon?

    Just recently I've noticed a new icon on the menu bar, an exclamation point with two arrows circling around it. I've never seen it before and when I click it the drop down menu shows Mobile Me conflicts, sync and preference options. I went to the pre