How can i use jpg extension with forms 10g and webutil

I have a form with webutil and i want to open imege jpg extension but thier are Bmp but my
image jpg and image item has no jpg extension .
How can i use jpg extension with forms 10g and webutil ?

You can use the JFIF image format for jpg files.

Similar Messages

  • How can I use Apple TV with iPhone 4S and no home Internet connection?

    Ok here is the situation.  I'm at my grandparents house where I have the following setup;
    NO home Internet connection
    iPhone 4S
    Verizon carrier with unlimited data plan
    Apple TV (I believe it's the latest one)
    Lynksys router
    What I would like to do is stream Netflix, HBO GO, or You Tube and put it on my grandparent's tv where I have the Apple TV hooked up.
    I thought it wouldn't be a problem however I can't figure out how to be on the same network from the router and receive 3G data at the same time.
    Is it possible to do what I want with this setup?  If so how?
    Thanks

    I think I worked out a solution given my equipment.  I was looking around on other forums and I found the following post concerning the ability for iPhone 4S to be on 3G and wifi simultaneously.
    "I know this thread is old and op may have discovered the answer already. However, I am posting this just in case someone else might be looking for a solution.
    The solution does not require any additional software nor require a jailbreak.
    All you need to accomplish this is already built into every iPhone and iPad with 3G.
    Connect to your wifi and write down the IP address your router assigned you. Then, select static tab instead of DHCP and fill in the IP address your DHCP server assigned to your iPad. Next, fill in the subnet mask but leave the rest of the fields empty.
    You now have access to your wifi as well as 3G.
    I ran into this issue when I wanted to use live traffic using 3G for my iPad's GPS and still connect to my GoFlex Satellite using wifi. It works extremely well."
    AFter configuring my phone to the router, as mentioned above, I connected my Apple TV to the same router.  Using the mirroring option I was able to airplay Netflix, You Tube and Flixster flawlessly from my phone to the big screen.  Direct TV and HBO GO did not work however. 
    I Then tried to access items directly from Apple TV thinking that it could use the data from my phone.  I was wrong.  So all in all I'm able to stream about half of my movie entertainment applications given my situation.  I'm pleased.

  • HELP....PLEASE How can i use my itouch with my laptop and my home computer

    i have just purchased an apple i touch 16gb... nice machine....
    the question i have is i have used my home computer as the "host computer" for i tunes however i have a laptop which i want to use aswell as my home computer for i tunes .... is there anyway i can use both without losing my music libary from my i touch when trying to sync to my laptop........?????? and without re-installing all my music like i had to for my home computer when i bought that new 12 months ago..???...... PLEASE HELP

    Unselect sync automatically when iphone connects. Then click manually manage music. This is a wee bit more hassle but means that u can add music etc. from both your computers.
    Hope this helps, let me know

  • How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

    No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts?
    Hi there
    My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
    What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
    This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
    How do I do this please?
    I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
    So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
    Any advise please?
    Thanks

    You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
    The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
    It's not meant to be a multiple user/multiple ID device.

  • How can i use text expander with the new Mavericks,

    how can i use text expander with the new Mavericks,

    I regret upgrading to mavericks for the same reason
    ftamez wrote:
    how can i use text expander with the new Mavericks,
    Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

  • How can i use "icloud backup" with ios 4.2.1?

    How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.

    You cannot.
    It requires ios 5.
    Your iphone can only go to 4.2.1

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

    Hi!
    I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
    Then I import it into OSB and make it work and the service works normally in the single node.
    But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
    So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
    Thank you!

    Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

  • How can i use MS word with MAVERICK

    how can i use MS word with MAVERICK?  None of the MS Office applications work with new IOS!!!

    What version of Microsoft Office Mac are you running?  You probably just need to update it to the latest release:
    http://www.microsoft.com/mac/downloads?pid=Mactopia_Office2011
    Office 2011 Mac's latest version is 14.3.8 for instance.

  • How can one use Mission Control with two monitors?  Please bring Spaces back

    How can one use Mission Control with two monitors.  With Spaces I could treat each space as a single desktop.
    SyBB

    I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
    Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

  • How can I use Local SPAN with RSPAN ??

    How can I use Local SPAN with RSPAN ??
    I want to mirror traffics from ISP-A and ISP-B to Anomaly-detector module.
    so I had configured like this...
    C6500-A
    vlan 1000
    name RSPAN
    remote-span
    monitor session 10 source interface Gi5/1 - 2 rx
    monitor session 10 destination remote vlan 1000
    monitor session 20 destination anomaly-detector-module 3 data-port 1
    monitor session 20 source remote vlan 1000
    interface GigabitEthernet1/13
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1000
    switchport mode trunk
    no ip address
    C6500-B
    vlan 1000
    name RSPAN
    remote-span
    monitor session 10 source interface Gi5/1 - 2 rx
    monitor session 10 destination remote vlan 1000
    interface GigabitEthernet1/13
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1000
    switchport mode trunk
    no ip address
    end
    but it was not working..
    it wasn't any change of input packet hit count when
    I'd enter a command 'show anomaly-detector module 3 data-port 1 traffic'
    was upper configuration wrong..?
    Can I use VACL configuration ?

    try to change "monitor session 10 destination remote vlan 1000 " to "monitor session 10 destination anomaly-detector-module 3 data-port 1 " on C6500-A

  • How can i use 3D Features with 256 VRAM

    How can i use 3D Features with 256 VRAM

    Well, in theory you *could* install Photoshop CS6 version 13.0 and not update it.
    Is your video card replaceable?  They don't cost that much.
    -Noel

  • How Can i use Html frames with  simple JSP???

    How Can i use Html frames with simple JSP???
    Actually i am creating an application in which i have used Index.html as frame.
    Noew i am trying that if i click on a link of one frame(say menu frame) the \result shoul come to some other frame(say frame named mainwindow).
    Hoe can i do like this???
    Anand Pritam

    Well i am using..
    < Base target="mainwindow">
    But it is no working is there some other way??

  • How can I use JTA in my business logic and execute process with PAPI?

    HI All,
    How can I use JTA in my business logic and execute process with PAPI?
    When my business logic has exception, the process will rollback.
    or the process has some exceptions, my business logic also will rollback.
    I don't know how to do it.
    Does anyone know how to do it?

    Thank you for your reply, Daniel.
    But I think I did not express my mind clearly.
    There is a scene that I have 2 Application Server.
    My business code is deployed in one Server.
    The BPM is deployed in another Server.
    I want to execute Task use PAPI.(ProcessServiceSession.runActivity)
    In my business code, I will do something before execute Task.
    I need my business logic and Task in same transaction.
    To ensure them "all-or-nothing" .
    As you say, if The transactions are managed by Oracle BPM.
    then can I retrieve OBPM transcaction in my business code?

Maybe you are looking for

  • IPad No Display - Goes to DFU if left ON - iTunes detects in Recovery

    Hello World, I have an iPad2 WiFi 16GB that has gone dead. I was perfectly working a few weeks back but now it’s almost dead. The problem was first observed on a morning when I tried to press the home button and the screen wouldn’t come on. I thought

  • My Iphone is not working at all

    I droped my iphone in the toliet and now its not tuning on or nothing

  • MM Import PO transaction

    Dear All, Following is the MM import Scenario how to capture in SAP. Company ABC Group Company Code under company is A and B. In our scenario Suppose company A raise the PO and also open the Letter of credit for the same PO. Before the good reach the

  • Anyone else seeing better-tha​n-ever speeds?

    I was reconfiguring an old Win XP laptop this evening and when I was about done I ran a test on  speedtest.net to see how the configuration was performing.  I was surprised to see better than ever download speeds.  I ran the same test on my Win 7 des

  • Using TV through my Laptop

    I have conected my TV to my laptop using the S Video cable. I can see my screensaver on the TV but cant seem to read anything else, ie play a DVD and watch it on the TV