How can I use my Mac OS X for the next time

Dear sir,
Please, I need your help about Mac OS X and how can I use the OS for the next time I mean when I'm going to format my computer or to use for the another computer.
By the way... I already installed the Mac OS X to my MacBook Pro so please I'm waiting for you advice.
Mohammed Hussein

Hi,
He bought the iMac two years after mine.
Would his Mac still be under warranty? It sounds like it is about only a year old and so may be still eligible for phone support, though that may depend on having nearby access to an Apple Tech support.
He could get a replacement disk sent to him as well. The cost, I don't know.
Your disk would probably work, but you don't need to burn one; just use yours. If you are in two locations, then it would be better for Apple to mail him a replacement disk for his particular Mac.

Similar Messages

How can I use OnBoard+Aditional audio cards at the same time? !!! BIOS PROBLEM !!!

I want use both audio cards. The On-board audio + SoundBlaster Audigy. Because I have mp3 player mp3tunes ( from http://www.mp3tunes.nl ) that is able play on both audiocards at the same time. It is good for DJ. One audiocard is for pre-listen.
But in BIOS is possible set only disable or auto-detect. When I set autodetect, then OnBoard audiocard is automaticaly disabled if there is another audiocard. Please tell me, what can I do for enable both audiocards ?

It's been awhile but as I promised here is my update:
I purchased an E-MU 1820m Pro Audio interface several months ago and ran it in my system for some time with the onboard audio disabled. Since this audio system is mainly for mid/high end audio production making use of low latency and up to 192mhz sample rates & 20/18 i/o then it is a bit of an overkill for using it for general multimedia & games so I thought I would place my c-media pci card back in and enable the onboard setting & see if the two systems would run ok together.
I first made sure that I uninstalled the e-mu card & then put the onboard card back in & installed the drivers. I then installed the E-MU, making sure that it wasn't sharing an IRQ with my 9600 pro like it originaly did on the first slot. So after installing that and the IRQ's were looking good I tested it all out and the results after two weeks have been perfect. I use the C-Media audio with the WDM drivers and use it for general audio & multimedia while I use the E-MU card with the E-MU ASIO 2 drivers and I use this with my audio production programs like Sonar, FL Studio & native Instruments Battery & Traktor.
Conclusion: Yes you can run a pro audio system as well as the onboard sound card with the MSI 865 Neo2 FIS2R.

How can I use an image as background for the entire page?

With CSS mill, the solid color was defined in the color.X.property file and there is no place to define an image to use as the background? Is it doable to use an image as the background for teh entire page? If so, where to add it and how to implement? Thank you!
Hao Pan ([email protected])

While I have been able to add the image to a JLabel and insert it into frames, so that it looks like a suitable background, I have found it impossible to place any other component over the top of said imageDid you set a layout manager for the label?
Check out the [Background Panel|http://www.camick.com/java/blog.html?name=background-panel] for two different solutions depending on your exact requirement.

How can I use my external hard drive for my iphoto instead of my mac book pro memory?

i don't know if this question has been asked before: how can I use my external hard drive for my iphoto instead of my mac book pro memory? just like itunes all my song are save on my external hard drive. make sense?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

How can I 'force' my Macs to look for each other on the network?

OK, I have an iMac with a wired connection to a router, and a MacBook Pro with a wireless connection to the same router. Most of the time, they can 'see' one another on the network, no problem. But, every so often, even after both have been on for a while, I will click the Network icon and the other computer will not appear as available - this happens even when the target computer can see the computer I'm using to try to access it.
So, here's my question: how can I 'force' my Macs to look for (and find) one another on the network?
Thanks... if you need further information, just ask... - beck

If you are using Tiger, go to
Finder menu -> Go -> Connect to Server
Enter the specific IP address of the other Mac where is says +Server Address+. You can find the IP address by running System Profiler or looking at System Preferences Network pane (on the other Mac).
Once you have mounted the volume you to access, make an alias for it and place it in the Dock or on your Desktop. The next time you want to connect to that server, use the alias.

I clicked on a link from an email that may be spam/phishing. How can I scan my mac book pro for any viruses?

I clicked on a link in an email that may be spam/phishing. How can I scan my mac book pro for viruses?

You can just download the free ClamXav and scan your entire drive - but as there are no known viruses for OS X (although there is malware - see Thomas Reed's excellent Mac Malware Guide) it's very unlikely that you have a virus.
The best source against malware is OS X itself and common sense. Don't click on links in suspicious emails and be careful of anything that wants to install something on your computer that is not from a reputable source.
Clinton

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

How can i use 2 different apple ids for imessage and facetime on 1 ipad?

Do you mean can you use one Apple ID for FaceTime and one for iMessage? You should be able to. Or, do you mean, can you log into iMessage (or FaceTime) with two Apple IDs at once? No.

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

Try one of these extensions for multiple cookie sessions.
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro? I also want to use windows 8 on it, would this work with parallels or bootcamp?

Yes, it supports target display mode. Windows can be run with either Parallels or Boot Camp.

How can i use JS files in ADF for language translation.

Hi,
I have JS for different languages and dn't want to convert them to property files(resource bundle files). How can i use JS files in ADF for language translation.
Thanks

Hi ILya Cyclone,
Thanks alotfor the reply. Can you tell me where should i include this in the jspx page.
Step 1)
I have the js file as js/ifl_messages_US.js and i created a resource file as you mentioned: JS_FILE_PATH=js/ifl_messages_US.js
Step 2)
Then added the entry in faces-config.xml for the resource file as follow:
<resource-bundle>
<base-name>resource_en.properties</base-name>
<var>resource</var>
</resource-bundle>
<locale-config>
<supported-locale>en</supported-locale>
</locale-config>
Step 3) This is my jspx page. In which a table is dynamically created on page load. Can you help me where should i enter the "#{resource.JS_FILE_PATH}"
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:resource type="javascript" source="/js/pdfFile.js"/>
<af:form id="f1">
<input type="hidden" name="checkRadio" id="checkRadio" value=""/>
<af:panelGroupLayout id="pgl1" halign="left" layout="vertical">
<af:image source="/images/BRAND_IMAGE.gif" id="i1"/>
</af:panelGroupLayout>
<af:spacer width="10" height="10" id="s1"/>
<af:table varStatus="rowStat" summary="table"
value="#{backingBeanScope.DummyBean.collectionModel}"
rows="#{backingBeanScope.DummyBean.collectionModel.rowCount}"
rowSelection="none" contentDelivery="immediate" var="row"
rendered="true" id="t1" styleClass="AFStretchWidth"
binding="#{backingBeanScope.DummyBean.myTableBinding}"
columnResizing="disabled">
<af:column id="c2" headerText="Actions">
<af:activeOutputText value="#{row.Actions}" id="aot2"/>
<af:goLink text="#{row.Actions}" id="gl1"
clientComponent="true" visible="false"/>
<af:selectBooleanRadio text="" id="sbr1"
valueChangeListener="#{backingBeanScope.DummyBean.checkselectbox}">
<af:clientListener method="selectCheckBox" type="click"/>
</af:selectBooleanRadio>
</af:column>
<af:forEach items="#{backingBeanScope.DummyBean.columnNames}" end="#{backingBeanScope.DummyBean.columnSize}"
var="name" begin="1">
<af:column sortable="false" sortProperty="#{name}"
rowHeader="unstyled" headerText="#{name}"
inlineStyle="width:100px;" id="c1">
<af:activeOutputText value="#{row[name]}" id="aot1" escape="false">
</af:activeOutputText>


</af:column>
</af:forEach>
</af:table>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks in advance

I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

I have an imac bought late 2013, can i use it as a display for the new mac pro running windows 8 through bootcamp?

No. Target Display mode is only supported when connected to a Mac running 10.6 or later.
It cannot be used with a PC, bootcamp, gamaing console, cable box, DVR or PowerPC Mac.
http://support.apple.com/kb/ht3924

Just downloaded the 7.1 IOS update and I'm able to stream my music from the cloud. Does this use up data and how can I get it to stop pausing for periods of time?

Just downloaded the 7.1.1 IOS update and I'm able to stream my music from the cloud. I'm wondering how I can stream more than just my purchased music?And does this use up data? Also, how can I get playback to stop pausing for periods of time? It is a wifi thing??

If streaming music when connected to your carrier's cellular network, it uses cellular data.
Only the music you purchased from the iTunes Store can be streamed unless you have purchased iTunes Match.
If there is a slow down at the server where the music is stored or high traffic, steaming can be paused. You can also download a song from the iTunes Store cloud to your iPhone so it doesn't need to be steamed.

How can I use word count without it counting the words in the end notes by default?

How can I use word count without it counting the words in the end?
Now I have to highlight the text to get a count.

I don't think that is possible, it does what it does.
Peter

How can I use my TimeMachine to back up the external hard drive

How can I use my TimeMachine to back up the external hard drive that is attached to my TimeMachine? I have the external drive attached to my TimeMachine via the USB port and want my TimeMachine to back up the files on the external drive, as it does for the files on my computer. How do I do that?

https://discussions.apple.com/message/16276201#16276201

How can I use my Mac OS X for the next time

Similar Messages

Maybe you are looking for