How can I use my time capsule with windows7

How can I use my time capsule with windows7?

This is asked regularly.
https://discussions.apple.com/message/10978060#10978060
Look at the more like this. On the right column next to the post.
Load airport utility for windows.. which will also load bonjour for windows.
In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

Similar Messages

How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
Click on the Wireless tab at the top of the page
Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
Then, you must power off your entire network...all devices....in any order that you want
Wait a minute
Start your modem/router first and let it run a minute
Start the Time Capsule and let it run a minute
Keep starting devices one at a time until everything is powered up
If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
Open System Preferences (gear icon) on the dock
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backup or, it might be Use Disk
Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

Can I use airport time capsule with a hotspot network?

Can I use airport time capsule with a hotspot network?

Can I use airport time capsule with a hotspot network?
Very very poorly..
It can join a wireless network..
See instructions here.
https://discussions.apple.com/thread/5719954?tstart=0
End result is super slow wireless connection to the TC and all packets pass through the hotspot so expect internet to drop to nothing while you are backing up.

Can i use my time capsule with virgin wifi hub

can i use 2tb time capsule with virgin media wifi hub router

Yes, but it will need to connect to the Virgin router using a permanent wired Ethernet cable connection from one of the LAN <--> ports on the Virgin router to the WAN "O" port on the Time Capsule.

How do I use my Time Capsule with hotel wired internet

How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

It may not be possible..
If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
Look up instructions on using ICS (internet connection sharing) in the Mac.
eg for 10.6.8 http://support.apple.com/kb/PH6589
eg http://support.apple.com/kb/PH10740
Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

How can I use my Time Capsule as an external Hard Drive for my PC? My PC can't find it.

Hi, I just bought this Time Capsule for my home. I've got the internet access for all my devices (Mac, iPad, PC, iPhone) and I've got the Mac backup working through Time Machine. I'm supposed to be able to use the Time Capsule as an external drive for my PC, but I can't figure it out. My PC doesn't recognize the Time Capsule as a Network Place. I called AppleCare, but they don't have all the answers for "PC issues." They tried to get me to Map a Network Drive, but my PC popped up a window asking for a Username and Password. It looks like something similar to when I VPN into my company network from home.
I'm using Windows XP Professional, Version 2002, Service Pack 3.
Any help would be appreciated.
Thanks!

Download and install the airport utility for windows.. it isn't strictly necessary but the bonjour service makes life easier.
The request for username and password is correct. Username is whatever you like.. but windows needs it.. so admin.. being the common router one.. password by default is public unless you changed it.
Now to get the TC to work properly..
1. The names should be SMB compliant.. by default they are wrong.. use short names, no spaces no special characters.. pure alphanumeric. That is for TC name and wireless names.
2. Wireless passwords should also be same use WPA2 private.
3. In the disk sharing page.. manual setup.. put in the windows workgroup name.. ie WORKGROUP.. this helps the discovery process.
4. In the same area, turn on the guest account to read and write.. not necessary but helps with later versions of windows particularly.
5. Access the drive by using the direct IP address. ie in Windows Explorer address bar, \\10.0.1.1 (or whatever IP the TC is at).

Can I use my time capsule with a bad hard drive as a wireless router if I remove the hard drive?

I have a 500 GB time capsule with a failed HD (i've repalced the whole machine with a new time capsule). I cannot get past the start up when I plug it in and the light glows a solid amber. If I remove the hard drive can I use it as just a wireless router to exted my network?

Yes, although the existing power supply might go bad before long.. you can run the TC as just an AEBS..
It is a fairly easy job to get the hd out.
http://www.ifixit.com/Device/Apple_Time_Capsule
Key to it is using hot air gun or even a hair dryer on really high temp lowest fan and spend enough time getting to glue to soften.

How can I use the Time Capsule in only 802.11b/g?

I think I am getting interferences on my 5GHz phone from the time capsule, which I have running in 802.11n mode with b/g compatitibility. I assume if the Time Capsule was running in 802.11b/g mode I would not get the intereferences?
The Airport utility does not seem to have a setting to use the Time Capsule in 802.11b/g only. Is there a way to accomplish this?
Message was edited by: Karl R.

Duane wrote:
Then the Time Capsule's 5 GHz network should not interfere with the phone since it operates a long way from the phone's frequency.
Not necessarily. In the US 802.11n channels appear to go up to at least 5.805 GHz, if I interpret this chart
http://www.networkdictionary.com/Wireless/Wi-Fi-Wireless-LAN-Frequency.php
correctly.
It would seem that the best way to avoid interference with 5.8 GHz cordless phones is to avoid channels above 153.

How can I use 2 time capsules in different locations (home/work)?

I want to use 2 time capsules in different locations (home/work) for backing my macbook pro with time machine. OS: lion.
I am new mac user and have in general lmited computer programming understanding. So, please, simple step-by-step guidence will be greately appreciated.
Thanks!
Andreas

Each time that you change location with your Mac, you will need to do the following:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backup

How can I use my time capsule to save files from my windows PC (Windows 8.1)?

I have been to see the iStore close to where I live but I am frustrated to say that they are no help what so ever. The technical desk there freely admits that they do not how to do it and all they say is "apparently it is easy. Just follow the instructions on screen" which helps me no end!
I have the Time Capsule set up on my mac and want to use part of the disc to save my files from my Windows PC (running Windows 8.1) that is on the same home network.
I have found the apple forums so helpful in the past that I am pinning on my hopes on anyone that can help me via the forum now!

Load the airport utility for windows. Sadly the most recent one is old.
http://support.apple.com/kb/dl1547
Although it is for windows 7 it does work on 8 and 8.1 .. tell us if you have problems loading it. Some people find it won't work without using safe mode.
The utility will not help a lot to setup the latest model TC.. it is fine for Gen4 and earlier. But it does load bonjour for windows and a disk access agent.
The TC should run simple names.. Short.. keep them below 10 characters if you can. No spaces and pure alphanumeric.
That includes the base station name and wireless name.
Once all of that is correct, open windows explorer and type in the address bar.
\\TCname or \\TCipaddress where you replace TCname with the new short name or TCipaddress with obviously its actual IP.
You will then get a request for username and password. Username is whatever.. admin will do. Password type in your disk access password.. public by default.
TC is not designed to allow partitions so you cannot partition the TC disk. Create a folder and simply copy and paste your files to the folder.
NOTE:: The TC cannot back itself up. So make sure you do not move files to the TC without having another copy.
NOTE:: The TC does not happily mix TM backups and data.
See http://pondini.org/TM/Home.html For info about TM and the TC.
This area in particular.
Q3 http://pondini.org/TM/Time_Capsule.html
On mixing data and backups.

How can I use my time capsule as an external hard disk?

Hi ,
I hav en Airport Extreme 3 TB. I have done the setup. And it seems to working well. But I also want to use it as an external hard drive. When I go finder Shared folder I could not see Data folder in it. I have this screen. How can I see that folder.
Any help would be appreciated.
Thanks.

I count 36 characters in your TC name.. This is not good.
Please reduce the name to somewhere less than 10 characters if possible.. 20 at most.
No spaces, pure alphanumeric.
See C9 here for why the present name is bad.
http://pondini.org/TM/C9.html
Also if your wireless name is the same.. change it to short, no spaces and pure alphanumeric as well.
Then manually mount your TC disk.
In finder use top menu, Go/Connect to server.
Type in AFP://TCname.local (TCname is your new short name. Local is the default domain).
Or it can be even better to use IP if that doesn't change.. ie TC is in router mode.. and by default is 10.0.1.1 then
AFP://10.0.1.1
Then apply and you will be asked for the TC disk password.. default is public but whatever it is you set. Make sure you save it in your keychain.
The TC data share should then mount.
And small comment about using the TC for files..
TC is designed for Time Machine. It is not a NAS.. it has no backup.. it is slow to spin up and fast to spin down. Using live libraries will result in corruption and loss of your entire library in the case of iphoto.
Please be very careful. Do not jump in and think very carefully. Time Machine cannot backup any network drives including the TC. You are going to have issues with backup if the TC is only location for your files.. it is unsuitable for this. CCC can backup to another drive.. but where will that be.. USB plugged into TC you will experience new visions of pain and suffering as the backup takes almost as long as digestion by a Sarlacc.
Pondini has some pointers here.
Q3
http://pondini.org/TM/Time_Capsule.html

Can I use my Time Capsule with a point to point antenna?

We have a building about 400 feet away that I would like to install wireless cameras. Can I use a point to point antenna with our time capsule or is there a better option?

The Time Capsule is too hard to get into. You can do this but the end result will be rather messy and for an expensive unit like the TC that is a waste.
Get a unit made for this job.. you only need a WAP..
eg http://www.tp-link.com/en/products/details/?model=TL-WA5210G

Can I use 2 Time Capsule with the same macbook?

I am commuting between 2 locations every 2 months
In one location I have a Time Capsule 1To working find
in the other location I want to install a second Time Capsule to have backup here.
Question is, when I will come back to the other location Macbook will recognize first Time capsule?
Regards
NG

I am using 2 TCs with my MBP. As far as I've been able to figure out, the macbook will not automatically detect and switch between time capsules. I manually switch backup location using the "change disk" in Time Machine Preferences.
I have no problems, but I am using one at work and one at home, so I am doing daily backups to each TC. I would guess that backups separated by 2 month intervals would take almost as much time as your initial backup depending on how many files have changed.
Also, you may want to check into accessing the TCs over the internet so you'd have access to the backups at the other locations. Maybe another app would be better since you don't have daily access to both TCs.

I can t use my time capsule with time machine. When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

See > Using Time Machine with a Time Capsule
From Pondini’s excellent Information Here...
http://pondini.org/TM/Troubleshooting.htm

How can I connect two Time Capsules with UTP

Hello,
I have one TC connected with UTP (WAN-port) on my modem to Internet on the second floor. I have a good WiFi-signal on the second floor.
I bought on new TC to get a better WiFi-signal on the first floor and also used for backup.
I like to connect TCold with TCnew with UTP to get a great network. I shoos UTP-connection in stead of WiFi, to get a faster performance from my network.
So I will use both WiFi-signals from both TC's, but de TC must be communicate with UTP, not with WiFi.
I think I connect UTP in my LAN-port from TCold
Which ports do I use on the TCnew (WAN-port or LAN-ports)?
How do I configurate de software?
Sometimes I see not 2 but 4,5 or 6 TC's in my network???
When I disconnect UTP between the TC's the connection with WiFi is 450 Mbit/s.
When I connect UTP between the TC's the connection is 217 Mbbit/s????????????
Can somebody help me?

The main thing is that TCnew is in bridge mode..
Open the airport utility.. go to the TCnew and select it as bridge mode.
Then go to the wireless tab, and create a wireless network of the same name and security as the TCold.
You are probably in extend wireless now and that is wrong.
The apple doco is here.
http://support.apple.com/kb/HT4260
What you want is called roaming network.

How can I use my time capsule with windows7

Similar Messages

Maybe you are looking for