How can I use one Add-on prior to another for specific MIME-types?

I'm using Shockwave Flash plugin to watch some videos on YouTube, StreamCloud, etc. It also handles .mkv and .mp4 files/streams. After installing VLC Web plugin to handle MIME-types like mp3/4, mkv additionally and prior to the Flash plugin, Firefox keeps using Flash to handle those types insted. I cannot find options to set the desired priorities. Only disabling the Flash plugin solves my problem, but also keeps me from watching Flash contents, which Is not acceptable.
Did I miss something or is this Firefox's fault?

If you type or paste '''about:plugins''' in the address bar and press Enter, you can see which plugins are associated which various content types.
I do not know how to prioritize one over the other for the same content type if the plugin settings (plugins often have an interface outside of Firefox to adjust their settings) do not allow that.
As for MP4, I don't think Flash normally would be selected. I suspect the website is specifying a Flash media player and streaming the MP4 through that. If you want to hide the Flash plugin from a particular website, you can use the Permissions tab of the Page Info dialog.
Click the padlock or globe icon in the address bar, then More Information, then Permissions. The top section of the Permissions panel should be "Activate Plugins". Here you can select Block for Flash for the current site. After reloading the page, does the media play using a different plugin?

Similar Messages

  • How can i use ONE server 2012 to be DC for a domain on the WAN only.. NO LAN. and NO VPN..

    I need to run an active directory that is on a WAN (Utah). a server 2012 standard will be the DC with 60Mbps internet speed both up and downstream.
    approximately 100 clients/member systems will be all over the united states. NO VPN. only via internet. I can use SSL certificate for secure ldap.
    I need this setup to use GPO for different permissions and policies instead of manually doing those on each windows 7 or 8 professional system.
    Ideas??

    Daniel,
    I think since this will be the ONLY system that will be running as a DC providing ADDS and the Direct access server, i should follow this advice from the article you sent:
    For users who never connect directly to the Contoso intranet or through a VPN, they must use the DirectAccess
    Offline Domain Join process to initially join the appropriate domain and configure DirectAccess. When this process
    is complete, the users log on normally and have the same experience as if they were directly connected to the Contoso intranet.
    Because remember, no user will ever connect directly to the subnet where the server is. so do an offline join First and then start managing.. Only thing im worried about is: they keep saying that the direct access function has significantly improved in windows
    8. hmmmmm many systems will be using windows 7 Pro 64Bit. Some windows 8.1 Pro 64bit. should i worry?

  • HT1660 how can I use one single library for all users on the same laptop?

    how can I use one single library for all users on the same laptop?

    You are most of the way there. Each user having access to hard drive is the key. If users are limited in file privileges this is harder.
    Any files you add to your library and any files she adds to her library are available to the other. Just not automatically. Each user must add the files to their own library using the add file or add folder option from menu bar.
    What I have done is set library location to a location outside of My Documents\My Music. On my network storage I have a folder names s:\itunes. Both accounts iTunes are set to use this location for the library.

  • 1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    HI Frostyfrog
    CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
    it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
    I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
    The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
    Good luck

  • How can i use one SQL statement to solve problem?

    How can i use one SQL statement to solve the question below?
    For a Table named A, there is a column named F(char type).
    Now select all the records where F like '%00' and update their F value to '%01'
    Just one SQL statement.Do not use PL/SQL block.
    How to do that?
    Thanks.

    What is the data volume for this table?
    Do you expect lots of rows to have '%00' as their value?
    Following two statements come to mind. Other experts would be able to provide better alternatives:
    If you have index on SUBSTR(f, 2):
    UPDATE A
    SET    f = SUBSTR(f,
                      1,
                      length(f) - 2) || '01'
    WHERE  substr(f,
                  -2) = '00';If most of the rows have pattern '%00':
    UPDATE A
    SET    f = SUBSTR(f,
                      1,
                      length(f) - 2) ||
               DECODE(SUBSTR(f,
                             -2),
                      '00',
                      '01',
                      SUBSTR(f,
                             -2));

  • How can i use one iCloud Photostream on 2 devices?

    Due to a bug (or feature) on iOS 8 i can't use the same icloud id on 2 iphones:
    https://discussions.apple.com/thread/6536998
    So how can i use ONE iCloud Photostream then on 2 devices?
    Also, on OSX i can define only one Photostream.
    So, how do you import pictures from 2 streams into iPhoto?
    Familyshare is not usefull as the pictures are not in Original-Filesize!

    Hi ..
    Yes. " iPhone 6 or 6 Plus.  iPad Air 2  or  iPad mini 3"
    Set up and use Apple Pay

  • HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

    Dear Support Team,
    Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
    Thanks

    It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

  • Can I use one subscription of Acrobat Pro XI for my 3 different computers I use?

    Can I use one subscription of Acrobat Pro XI for my 3 different computers I use?

    [discussion moved to Acrobat Installation & Update Issues forum]

  • How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8

    Dear Sir/Madam,
    How can we use Custom MessageBox in SelectionChangedEvent of LongListSelector for Windows Phone 8.
    Actually my problem is that When i am using Custom  MessageBox in SelectionChangedEvent of LongListSelector,when i am click Open(Left Button) it's working fine and navigated correctly,But when i am Click the No(Right Button) then it stayed in same page
    but all that page is in stuckup i mean that page is not working and not doing any event.
    My C#.net Code
    private async void userPageLongListSelector_SelectionChanged(object sender, SelectionChangedEventArgs e)
    if (e.AddedItems.Count > 0)
    if (userPageLongListSelector.SelectedItem == null)
    return;
    if (dbTenMin == null)
    dbTenMin = new Database(ApplicationData.Current.LocalFolder, "tenMInDBSchema.db");
    await dbTenMin.OpenAsync();
    var res = (sender as LongListSelector).SelectedItem as _10Min._10MinClass.minUserPages;
    var resIndex = (sender as LongListSelector).ItemsSource.IndexOf(userPageLongListSelector.SelectedItem);
    string selectedPageName = res.userPages.ToString();
    string selectedPageDesignUser = res.pageDesignUser.ToString();
    int selectedIndex = resIndex;
    CustomMessageBox messageBox = new CustomMessageBox()
    Caption = "Message...!",
    Message = "This form need offline datalist,Please load now.",
    LeftButtonContent = "Open",
    RightButtonContent = "No"
    messageBox.Dismissed += (s1, e1) =>
    switch (e1.Result)
    case CustomMessageBoxResult.LeftButton:
    string uidAndpwd = _10MinClass._10MinStaticClass.csUidAndPwd.ToString();
    _10MinClass._10MinStaticClass.csDataListPageDetails = selectedPageDataDetailsForSchema.ToString();
    _10MinClass._10MinStaticClass.csAllDataLists = offlineDataBaseDataListNam;
    _10MinClass._10MinStaticClass.csNotCreatedSchemaNameOfDBList = notCreatedDataLists;
    userPageLongListSelector.SelectedItem = null;
    if (dbTenMin != null)
    dbTenMin.Dispose();
    dbTenMin = null;
    NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
    else
    NavigationService.Navigate(new Uri("/10MinformDataList.xaml", UriKind.Relative));
    break;
    case CustomMessageBoxResult.RightButton:
    break;
    case CustomMessageBoxResult.None:
    break;
    default:
    break;
    messageBox.Show();
    Same custom messagebox code working in Phone_BackKeyPress event i am writing the code in Right Button that e.OriginalSource.ToString(); then it is working fine.
    But It is not working in Selection Changed Event in LongListSelector control in Windows Phone 8.
    Please help me,as soon as possible.
    Thanks & Regards,
    SrinivaaS.

    What happens if you leave the implementation for LeftButton empty as well , does the page gets stuck in that case also, if you press left button?
    i.e.
    CustomMessageBox messageBox = new CustomMessageBox()
    Caption = "Message...!",
    Message = "This form need offline datalist,Please load now.",
    LeftButtonContent = "Open",
    RightButtonContent = "No"
    messageBox.Dismissed += (s1, e1) =>
    switch (e1.Result)
    case CustomMessageBoxResult.LeftButton:
    break;
    case CustomMessageBoxResult.RightButton:
    break;
    case CustomMessageBoxResult.None:
    break;
    default:
    break;
    messageBox.Show();
    http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

  • How can I use an American credit card to pay for a membership from outside the US?

    How can I use an American credit card to pay for a membership from outside the US? My payment page is set up for Japanese credit cards. I can't change to the US store, because the "Select a Store" page just jumps to the "Products" page.
    Has anyone else had this problem? Any help would be much appreciated!

    Hi Batt5721,
    Welcome to Adobe Forums.
    The address and the country on the Credit Card should match the billing address then only payment would be possible.
    Thanks
    Garima

  • HT4437 How can i use the tv as a wireless monitor for my computer?

    I can move my pics and music into itunes to watch and hear on tv, but how can i use my tv as a wireless monitor for my computer?

    Unfortunately, no mechanism for this exists for Windows. If you had a Mac, you could get AirParrot...

  • How can I use one photo twice in a slideshow

    I am in iPhoto '11 9.4.3 making a slideshow to send to iDVD for my mother-in-laws funeral next Wednesday.
    How can I use this one particular photo of her several times in the slide show.
    I have tried copy/past and that does not seem to work.
    Thanx in advance

    I would just duplicate the picture several times and keep inserting duplicates ...

  • New to LABVIEW. How can I use one analog channel to trigger acquisiton of a signal on another analog channel?

    I am new to using Labview and have been tasked to write data acqusition program for my company. We are attempting to log 6 machines, each with their own asynchronous trigger (I can't use one trigger for all 6 machines). I have the idea to use (for example) ai0 for the measurement and ai1 for the trigger (for one machine), yet I see nothing in the documentation on how this is done. I have tried playing around with the DAQ express VI (I am using Labview7) but still don't see a way to have the setup I am looking for. I'm sure this is a relatively easy question, but I'm unsure where to go to look for an answer. Any helpful pointers or guidance in the right direction
    would be very helpful!

    If what you want to do is start the acquisition of channel 0 when channel 1 reaches the trigger condition and not start channel 2 until channel 3 reaches it's trigger condition, then no, you cna't do that unless you have multiple daq devices. What can be easily done is continuously acquire all channels and monitor your trigger channels. When the trigger condition is met, then perform the analysis/logging. On the Analyze>Waveform Monitoring palette is the Basic Level Trigger Detection function. Use one for each trigger channel and have it return either the index or relative time of the trigger occurance. This value can then be used to idex that portion of the measurement channel that you're interested in.

  • HT3354 how can i use one table for reference to another

    how can i use a table for a referance to another eg when i type a word in a cell, i will like it to match the word with another table then return the information in the cell i am using

    you can use vlookup() (or any of the lookup family of functions) to locate an item based on a key value:
    Here is an example of something you can do with two tables:
    The table on the right is title "Data" and stores a list of names with age and favorite color.
    The table on the left uses the value in the first column to lookup up information in the table Data
    in the table on the left:
    B2=IFERROR(A2&" is " & VLOOKUP(A2, Data :: A:D, 2, 0)&" years old and likes the color "& VLOOKUP(A2, Data :: A:D, 3, 0), "NOT FOUND")
    I know this look complicated.  so I'll break it up into smalled pieces:
    first the "&" is called the concatenate operator and joins two strings.  like this:
    a string is a set of characters between double quotes.
    so "string 1" & "string 2" becomes "string 1string2"  or "Sam " & "Jones" becomes "Sam Jones"
    you can use cell references instead of strings directly in which case the concatenation is performed on the contents of the cells.
    so if cell A1 contains "Hi " and the cell A2 contains "There"  then A1 & A2 will result in "Hi There"
    so you could add the formula
    A3=A1 & A2
    this is short hand for select cell A3 then type everything including the A3 so that A3 contains "=A1 & A2" (omit the double quote)
    OK.  So the formula I provided concatenates several items together:
    it concatenates A2, then the string " is " then a formula, then the string " years old and likes the color " then a formula
    the two formulas (highlighted in blue) perform a lookup of the value in cell A2 in columns A thru D of the table named "Data".  If if finds the value in cell A2 in the first column of the lookup range in the table Data (column A) then it returns the value from the same row but in the second or third column.
    all that is in a function calld iserror() to trap the condition where the calue you enter in A2 does not exist in the table Data:
    You will find the Numbers users guide and function reference helpful.  You can download then from Apple here:
    http://support.apple.com/manuals/#productivitysoftware

  • HT4623 how can i use one i5 in oman which is bought from australia?

    how can I use my i5 in oman which is bought from Australia?

    Hi,
       I put new sim card (omantel -prepaid) but some msgs. is came.( The sim card that you currently have installed in this phone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the I phone.Please insert another SIM card from a supported carrier  or request that this I phone be un locked by your carrier.Please contact Apple for more information ).

Maybe you are looking for