How can I use the CAN MODULE in LABVIEW 6i?

How can I use the CAN MODULE in LABVIEW 6i?
HELP ME! PLEASE

Not sure what your real question here is, but I'll take a stab at it.
The NI-CAN drivers (module) only work with the NI CAN cards. If you have a different vendors card, you'll have to contact them to see if they have LabVIEW drivers.
If you do have a NI CAN card, then you just need to install the NI-CAN drivers and you're ready to go. Have a look at the examples for help in getting going.
If you're having a specific problem, please give us some more details and we may be able to help out a bit more.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Similar Messages

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

Can i use the Service Module?

Hello all,
can i use the service module w/ the ff. scenario?
items are manage by serial numbers., but we dont sell it, we purchase the item for internal use only. this are the ff. information that i want to track.
1.     track the history of the item everytime it has undergone for repair
a.     some cases the repair takes place within the company, meaning employees within the company take care on the labor but only parts will be purchase
b.     some cases the repair takes place in business partner, (PO Service in this case)
2.     track the parts that was replace
what will be my work around for this. please advice
best regards,
Fidel

Hi Fidel,
You would need the following is you wanted to use the Service Module to track internal serialized inventory/hardware:
1. Set up a customer record that would represent the internal use/company/department
2. Manually create the Customer Equipment Card (when receiving the equipment on GRPO or AP invoice, you would want to use a warehouse that represents internally-used equipment/assets)
Repairs: you could update the status of the CEC record when it's being repaired (or have a repair WH for when it's sent off-site).
Expenses: related expenses could be done by creating a Service Call linked to the CEC with details/purpose, etc. which would be tracked on the Expenses tab but the transactions don't include AP (PO's), the assumption being that any expenses would be charged back to the customer, which in this case would be internal.
If you want the expenses linked to the item/CEC then you could use Activities from Service Call and you can link the PO/AP invoice thru the Activity. You could have one S/C record that would be for tracking equipment repairs and leave it open for as long as you have the item - that would be the link between the Activities and the CEC/equipment record. Whenever repairs are to be record, you would only need to pull up the CEC record and drill-down to the S/C to create a new Activity record. This will also enable you to see how many repairs are being down - you could even breakdown the Activity on internal vs external (have it as a Type, on which you can then report on overall as well as by item).
It will depend on what info you want to capture and if you need anything for reporting that would be that detailed (i.e. down to a serialized item) as to what process & setup you want to use. Try out the above and hopefully something will work out.
HTH,
Heather

Can I use the map module in a WordPress website?

I'm most interested in the map module for trip photography. My general practice is to use google maps to trace trips and photography locations. Is it possible to do that in LR4's map module and then move them to a WordPress website?
Thanks in advance for any assistance,
John Kendrick

You can make a map in maps.google.com, and then upload your images. ( little like you can upload your photos into flickr and then use a wordpress plugin to put them into your wordpress site)
I am in the process of updating my (wordpress) website and I want a map page that has all my fav. images in it. I need to do some research into this, but I've made several websites, including this one where i've used a map i've made from google maps - link, added the location of the property, the airport in Cape Town and a line showing the route.
If you click the sun, you will see another photo in context. This method can be added to any maps, - implied to a wordpress site, as its only an iFrame into a google map that you've created.
so to make
1 - make a google account
2 - make a google map
3 - add photos ( here's hoping exporting photos from LR4 will have the GPS location so the photo appears on the map at location X,Y),
4 - then import your google map into your wordpress site.
PM me in the oncoming week and I will let you know my findings and when I've sussed it, there will be a blog on how to do it.
But in the mean time, the bare bones of what you need to do are available above.

My lightroom has updated to 5.5 and I now can't use the Develop module.

My lightroom has updated to 5.5 and I now get the message "Develop module is disabled -please renew your membershipto reactivate the Develop module". My membership is ongoing so how do I resolve?

Adobe made a help page for this problem because so many people have it:
https://helpx.adobe.com/lightroom/kb/unable-launch-lightroom-55.html

How do I use the Web module to upload video to my website?

I'm using the Lightroom HTML gallery to upload my photos, fine and dandy, very happy with it. I also have some videos trimmed in Lightroom that I want incorporated into the gallery. This doesn't seem to be happening, instead I just get thumbnails. What/how do I incorporate my video clips into my web gallery? I moved over from jAlbum so I could have a simple one-tool workflow, so I'm really hoping that this is possible.

You can combine stills and video for output to h.264 (mp4 file) for example to upload to Youtube or Vimeo.
FTP upload will be subject to the limitations of your host. The web module within Lightroom creates all resources to link to the file index.html
The forthcoming LR6 is anticipated to have HTML5 galleries.

How can I use the Variable Delay VI (From DSP Module) to Deploy Variable Delay on Speddy-33

Dears,
I dont Understand How Can I Use the Variable Delay to Deploy Variable Delay on a Speedy-33 Kit

Hello,
Thank you for posting to the NI Forums!! You should be able to incorporate the Variable Delay.vi into your vi and then build as normal and the functionality of the vi should translate to the build. What type of build are you doing? Are you receiving any specific errors? Thanks!
Regards,
Margaret Barrett
National Instruments
Applications Engineer
Digital Multimeters and LCR Meters

How can I use the Control Design & Simulation module in the Mobile (PDA) modul?

Hi everyone!
I have to create Bode and Nyquist plot from Transfer function on a PDA, but I can't use CD&S Modul when I'm opening a new Mobile project.
Thank you for your answer!
Sincerely yours,
Jenő Kocsis

Jenő Kocsis wrote:
Hi everyone!
I have to create Bode and Nyquist plot from Transfer function on a PDA, but I can't use CD&S Modul when I'm opening a new Mobile project.
Thank you for your answer!
Sincerely yours,
Jenő Kocsis
Does it have to any transfer function? Or is it some limitations
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

How can i use reuse_alv_fieldcatalog_merge function module

I am using below steps for populating the final internal table.How can I use reuse_alv_fieldcatalog_merge function module in the place of declaring all these fields.How canI put title of the report in reuse_alv_fieldcatalog_merge function module.
FORM BUILD_FIELDCATALOG .
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'KUNNR'.
FIELDCAT-SELTEXT_M = 'Customer Name'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VBELN'.
FIELDCAT-SELTEXT_M = 'Invoice Reference'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKBUR'.
FIELDCAT-SELTEXT_M = 'Sales Office'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'VKGRP'.
FIELDCAT-SELTEXT_M = 'Sales Person'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FINAL'.
FIELDCAT-FIELDNAME = 'POSNR'.
FIELDCAT-SELTEXT_M = 'Item No'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-KEY       = 'X'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME   = 'IT_FIANL'.
FIELDCAT-FIELDNAME = 'ARKTX'.
FIELDCAT-SELTEXT_M = 'Item Description'.
FIELDCAT-JUST      = 'L'.
FIELDCAT-DATATYPE = 'C'.
APPEND FIELDCAT TO I_FIELDCAT.
CLEAR FIELDCAT.

Hello,
It is very easy to use reuse_alv_fieldcatalog_merge.
You try this it will work.
example
data:
DATA : gv_repid        TYPE syrepid VALUE sy-repid . " Report id
PERFORM set_field_catalog USING gst_struct CHANGING lst_fieldcat.
FORM set_field_catalog USING uv_tab TYPE slis_tabname
                     CHANGING xt_fieldcatalog TYPE slis_t_fieldcat_alv.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = gv_repid
      i_internal_tabname     = uv_tab
      i_inclname             = gv_repid
    CHANGING
      ct_fieldcat            = xt_fieldcatalog
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " set_field_catalog_spec

How come I can't use the back gesture in certain apps with my magic mouse on certain applications in Lion OS?

How come I can't use the back gesture with my magic mouse on certain applications in Lion? I figured out that in Safari i have to use a 1 finger swipe to go back a page instead of 2 fingers like i used to do in Snow Leopard. But apps like iTunes and iPhoto and i can't do that. Any ideas? is there a setting im missing to make this work? It works in Safari but not any other applications, so im assuming theres no setting for this. Just want to know if this is just a bug that will be fixed in the next update or if its something I can fix now. Any help would be appreciated because its kind of annoying. Other than this minor issue I love Lion. Full screen apps are unbelievable.

Hi.
I managed to compile open-vm-tools and the kernel module against 3.14.5 kernel. Here is the tarball with the all the files.
I still have an issue : With vmware-player 6.0.2, I can't acces my shared folder :
root@P146S011b ~ # lsmod | grep hgfs
vmhgfs 41622 0
vmw_vmci 47960 2 vmw_vsock_vmci_transport,vmhgfs
root@P146S011b ~ # vmware-hgfsclient
R
D
C
root@P146S011b ~ # mount -t vmhgfs .host:/R /mnt
Could not add entry to mtab, continuing
root@P146S011b ~ # tail -1 /etc/mtab
.host:/R /mnt vmhgfs rw,relatime 0 0
root@P146S011b ~ # cd /mnt
cd:cd:6: not a directory: /mnt
1 root@P146S011b ~ #
Forgot to add an install file with a depmod -a inside. You will have to run it by yourself

How can i use this function module

Hai
How can i use this function module /SAPHT/SALES_ORDER_READ, already apply the some parameters in this function module, but it shows the error , please tell me, how to declare the parameters in this function module ,
thanks
neelima

Hi
For a particular sales order,you have to pass the order number and the item number in the sales order.
It will display the rest of the values which u can capture them using internal tables.
Regards,
Vishwa.

How can we use the standard LDB in custom program.

Dear all,
can you please tell me the way , how can we use the standard LDB in custom program.
Thanks & Regards,
Jyothi.

Hi
You can use the Function module LDB_PROCESS to use the Standard LDB in your Z custome program for further details about using the Standard LDB and accessing the LDB in to the program search SDN
http://help.sap.com/saphelp_nw04/helpdata/en/64/237f8cd43711d1950b0000e8353423/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/97/b3edb8163111d2953c0000e8353423/frameset.htm

How Many Times Can I Use The Same Serial Number For Adobe Creative Suite 4?

I have design standard and was told I can use the same serial number on multiple computers. How many time can I use it? And say I install it on the maximum number of computers, but get a new computer, can I uninstall it on one of the old computers and use it on the new one? And can I use the programs on both computers simultaneously or do I have to use them one at a time?

Fred Tech wrote:
Broadly speaking, it depends on the type of license you have.
Specifically, if you have a single license then officially, you should only install it once on one computer.
Practically, (unless it has changed with CS4) you maybe able to install it on more then one computer, BUT can only run one instance of the software at a time. You can not run more then one instance of the software concurrently; i.e. you can't run Dreamweaver on Computer 1 and Photoshop on Computer 2. That would be two instances, and is not permitted.
This is my understanding. I am happy to be corrected if I am wrong
Fred
Sorry Fred you are wrong.
If you have a single license you can install it on as many computers as you like. you can only activate the suite on two computers at anyone time. Work and Home or as many of us do it Desktop and Laptop. You can not use the computers simultaneously. You only have 20 activation/deactivations so use them wisely. Student versions only have one activation. You can not break up the suite installs the suite is considered one application.

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first

Please help!!
How many times can you install Lightroom 5? My problem is that I have saved my programs on C. To I have more space, I want to save my programs now on E. Can I now uninstall Lightroom and reinstall from C to E? Can I use the same license code as the first installation?

Thank you for your answers, it helps me a lot.
But sorry for my ignorance. I understand how you mean it, but I don't know how to do it. I'm scared to lose the settings/edits of the images.

How can I use the CAN MODULE in LABVIEW 6i?

Similar Messages

Maybe you are looking for