How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg:  How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing &amp; Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, &amp; "Stop Following"
     Start a new discussion in Creating, Editing &amp; Exporting PDFs by email or at Adobe Community
  For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Similar Messages

  • Burning DVD, can't drag or copy and paste items, all I get is an alias -mbp

    Hi all
    Just upgraded to Leopard, am I being dumb?
    When I drag items to a blank DVD or copy from the HD and paste to the DVD all I get is an alias version of the files??
    I have found if I hold down "alt" it copies the actual files... is there a way of swapping this as who wants to burn a disc of alias's??
    Az
    PS Merry Christmas!

    Actually ever since Tiger there has been a change to "burn folders" which show an alias when you drag items to a mounted blank disk. Prior to Tiger the system would indeed make a copy of items to be burned, then after burning you recovered the disk space. Starting with Tiger this was changed, the alias is used and when you burn the disk the system uses the alias and burns the original to the disk. The only thing to be aware of that can cause a problem is if you find you have more "stuff" in the burn folder than space on the blank disk, and open the alias in the burn folder to trash some files--you are, of course, trashing your originals. So don't do that! Move some stuff to the Desktop or another folder to reduce the size.
    Francine
    Francine
    Schwieder

  • After the most recent firefox update I can no longer copy and paste. the fuinction only works in Windows and I HATE usign it. Any suggestions on how to restore the copy and paste function while using Mozilla?

    I have been unable to use the copy and past command while using mozilla. the fucntion does work in windows IE, but I don't want to use windows. How do I restore or fix this function? I varies, works some days and not others.

    See http://kb.mozillazine.org/Clipboard_not_working
    Try to use the keyboard if the buttons on the web page aren't working.
    * Copy: Ctrl+C or Ctrl+Insert
    * Paste: Ctrl+V or Shift+Insert
    * Cut: Ctrl+X or Shift+Delete

  • With the Lion, the copy and paste commands don't work.  So if you choose a photo and right click Copy, this photo can't be pasted in another event.  This used to work with Snow Leopard.

    The copy and paste functions in iPhoto used to work in Snow Leopard, but not with the Lion.  How do I copy and paste photos from one event to another?  What I don't understand is that it used to work with Snow Leopard, and now that the OS has been upgraded to Lion, it doesn't? 

    Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
    LN

  • My movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

    My iMovie 11 movie has clips that have some extracted audio that I would like to use for the menu music in iDVD 11. Does anyone know how to do this? Copy and paste does not seem to work.

    I would use Quicktime Pro.
    See: QuickTime Pro: How to Extract or Disable Tracks at http://docs.info.apple.com/article.html?artnum=42596 and QuickTime Player 7 Help - Extracting, Adding, and Moving Tracks at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c3qt6.html
    To get Quicktime 7.6.6 for Snow Leopard see: QuickTime Player 7.6.6 for Mac OS X v10.6.3 at http://support.apple.com/kb/DL923  (Quicktime 7.6.6 is the latest version.)
    To upgrade to Quicktime Pro see: QuickTime Player 7 Help - Getting QuickTime Pro at http://docs.info.apple.com/article.html?path=QuickTime%20Player/7/en/c2qt.html

  • HT2506 hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

    hi i can't seem to copy and paste pdf files from preview to a microsoft word document. it always comes up with nonsense characters in the word document. how do i fix this? thanks in advance

    Hi,
    The quickest way to do this (tested with OS 10.8.2, MS Word 2011) is in one line:
    tell application "Microsoft Word" to close every document whose name begins with "book"
    The reason why your script doesn't work is that you aren't specifying to Word which document you want it to close.
    So, changing one line ought to do it:
    close document incrementvalue -- instead of "close document"
    But... when you close a document, you change the document count. Document 2 becomes document 1, document 3 becomes document 2 etc. So eventually you'd get a message saying "The object you are trying to access doesn't exist".
    Because of this, if you want to do it in a repeat loop, you have to work backwards:
    tell application "Microsoft Word"
      set doc_count to count documents
      repeat with x from doc_count to 1 by -1
      if name of document x begins with "book" then close document x
      end repeat
    end tell
    Hope this helps.

  • 1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

    HI Frostyfrog
    CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
    it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
    I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
    The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
    Good luck

  • How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

    How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

    It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
    Go to DISK UTILITY
    Choose the Hard Disk you intended
    ERASE
    You can choose either
              (I personally prefer this one, you know just in case)

  • All of a sudden I can not print my e-mail in firefox (I used to be able to) I can print if I copy and paste to MSW or do it in IE or a Web sight.

    All of a sudden I can not print my e-mail in firefox (I used to be able to) I can print if I copy and paste to MSW or do it in IE or a Web sight.
    == This happened ==
    Every time Firefox opened
    == About a month ago

    Is it possible you mistakenly clicked on a [Clear Layout] button?
    But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
    Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
    Note: a Book Collection shows an icon that looks like a book.
    Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
    Re-opening a book without using the "Saved Book" option can have unpredictable results.
    A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc,  is automatically updated in the Saved Book collection.

  • In Firefox 36.0.1, can I show ONLY copy and paste in the navigation toolbar without showing cut?

    In Firefox 36.0.1, can I show ONLY copy and paste in the navigation toolbar without showing cut?

    Do you only want this to happen if you right-click in the location/address bar?
    You can ddd code to the <b>userChrome.css</b> file below the default @namespace line.
    *http://kb.mozillazine.org/userChrome.css
    <pre><nowiki>@namespace url("https://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    #urlbar menupopup menuitem[label="Cut"] { display:none !important; }
    </nowiki></pre>
    The customization files userChrome.css (user interface) and userContent.css (websites) are located in the <b>chrome</b> folder in the Firefox profile folder.
    *http://kb.mozillazine.org/Editing_configuration
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *Create the chrome folder (lowercase) in the <xxxxxxxx>.default profile folder if this folder doesn't exist
    *Use a plain text editor like Notepad to create a (new) userChrome.css file in the chrome folder (file name is case sensitive)
    *Paste the code in the userChrome.css file in the editor window
    *Make sure that the userChrome.css file starts with the default @namespace line
    *Make sure that you select "All files" and not "Text files" when you save the file via "Save file as" in the text editor as userChrome.css.<br>Otherwise Windows may add a hidden .txt file extension and you end up with a not working userChrome.css.txt file

  • Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

    Is there a way that you can copy and paste blade effects from one clip to the other so that the cuts are an exact duplicate of each other?

    The same cuts that I have in this clip that i performed with the blade tool, I want to duplicate, copye, paste and apply to another clip. I want the cuts to mimic and be an exact same. I wish i could highlight the clip, click copy and then highlight the other clip and then click paste and the cuts apply.

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • Why cant I copy and paste text from my book thats in the library?

    Why cant I copy and paste text from my book thats in the library?

    MCWEB wrote:
    Can I Copy and Paste text from one Contact to Another on iPhone 3G?
    You will be able to do copy & paste when 3.0 comes out this summer.
    Or even better while the iPhone is connected to my PC can I view the address book on the iPhone and make changes using my PC keyboard?
    No. You would make changes to the address book on your PC and then sync via iTunes.

  • Does iPhoto '11 have the copy and paste function?

    On my old MacBook the iPhoto allowed for the copying and pasting of adjustments, on my iPhoto '11 where the copy and paste option used to be there's nothing.

    Terence -
    I tried that, but it didn't work .. and I discovered why.  The key was in the last word of your sugg's first line:  "move."  I don't want to MOVE the pic, I want to COPY it to another event, and following your suggs produced this box:
    So, with your and the Old Toad's help, I now see I was pounding sand - can't do it!  Unless we can get the iPhoto developer gurus to add that capability, we'll have to consider this case ... Closed.
    Thanks, guys!

  • Disable the copy and paste

    Hi,
    can any one tell how to disable the copy and paste functionality of the text items in the forms 11g.
    Advance Thanks.

    Change the item type from TEXT to DISPLAY. If you want the user to be able to type in the field, it will be difficult to prevent copy/paste. It might be possible with a PJC.

Maybe you are looking for

  • Extracting MIME attachment from email using OSB proxy service - email transport

    Hi, I'm reading email messages(multipart/mixed) with attachments(pdf, zip, xml and csv) from MS Exchange Server 2010 using OSB proxy service email transport.I need to save the attachments to a local folder and process one of the attachments, an XML f

  • Server Hung, and came back after some time (WLS 6.1 SP4 / Linux 7.3)

    We are using webogic 6.1 sp4 on Red Hat Linux 7.3 2.96-126, and the server just hangs without any reason. The core dump is pasted below, thanks for the help. Unexpected Signal : 11 occurred at PC=0x40248304 Function=(null)+0x40248304 Library=/usr/jav

  • Paypal confusion

    I've been pasting Paypal buttons into my web pages from snippets for years, and everything has worked great. I simply pasted the snippet in, selected the various input fields, and changed what was necessary. All of a sudden, my input fields are being

  • Deleting a List Item with Very Huge Amount of Versions

    A faulty workflow flooded list items with 50K+ versions on SharePoint List. Attempts to open the list item/delete/edit via SharePoint UI/PowerShell failed! Programmatic iterations to delete versions/items trys to consume complete server memory and fa

  • Using OPENQUERY against a linked server in SSIS?

    I'm trying something that should be simple. I want to set up a data refresh package using the SSIS Import and Export Wizard. My source is Sage's MAS200 which is written on top of the ProvideX "DB" (a DBA's nightmare). Unfortunately, there is NO Provi