How can I use the "gcc compiler and emacs editor" in Solaris 8 for Intel?
I installed Solaris 8 for Intel to my desktop computer.
After the installation, I found I couldn't use the companion software (the software CD included in the Multilinugal Media Kit for Solaris 8) - especially the emacs editor and gcc compilers.
I certainly installed the companion software to my computer. And I can identify that those softwares are
really installed to my system. In order to check out whether I installed them or not, I went to the "System Administrator" and opened the "Solaris Product Registry", in which I identified that all the files in
the companion software were succesfully installed in my computer.
However, when I open terminal or console box and tries to use those
software, the system responds that "there is no emacs or gcc."
Why I cannot use those things?
Did I install the companion software wrong?
I really don't understand why I can't use them.
For your reference, I saw the directories "/usr/bin" and "usr/ccs/bin"
too.
In /usr/bin I typed
#as
and no such command.
In /usr/ccs/bin
#as
and also no such command
was what I had as a response.
If I installed the companion software CD correctly and if they are installed somewhere in my computer,
where I can find them and how I can use those softwares?
Lastly, whenever I try to connect to my ISP via telnet mode, I see this
message.
"Try to connect ...
connected to ***.***.***.*** (IP address of my ISP)
Closed by foreign hosts."
Is there any one who knows why this happens?
Thanks for reading my question.
gcc and emacs install in /opt/sfw. You should change your path statement to include /opt/sfw/bin and should obtain the FAQ from sunfreeware.com. The FAQ answers all your questions.
I have installed gcc and gtk and am using both at this time.
[email protected]
Similar Messages
-
I want to make another panel appears and runs, but i don´t want to use a subpanel. So, i would like to use somenthing similar to Loadpanel and Displaypanel, that you can use in Labwindows CVI, but in Labview, is ti possible?I hope your answers, thank you!!!
Hi Bichillo,
I posted an example here.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=137&HOID=50650000000500000014570100&HTHREAD=000087828&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
It demonstrates how to do what you are asking.
I do not mind you laughing at the code.
Have fun!
Ben -
How can i use the boolean AND here?
Hi,
how can i use the boolean expression AND in order to include it in the expression below so as that 2 condition must be true in order to get the respective data from the database?
java.sql.ResultSet res = statement.executeQuery("SELECT * FROM station9 " + "WHERE P =" + power);
regardsjava.sql.ResultSet res = statement.executeQuery("SELECT * FROM station9 " + "WHERE P =" + power + " AND FLAVOUR = " + raspberry);
-
I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.
As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv -
With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud how can I use the phone again with ALL my pictures and videos without restoring it?
Contacts are designed to be synced to a supported application on the computer or a cloud service.
Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
If you have failed to use the device as designed it may be too late to recovery anything.
Is the device regularly backed up to a computer via iTunes? If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created. -
I have two apple id's because my hotmail account is no longer active. How can I delete the old one and use or update the new one? Every time I try it won't allow me and now my iPad thinks there are two accounts and they are arguing with each other. Help!
You can't merge accounts or copy content to a different account, so anything that you bought or downloaded via the old account is tied to that account - so any updates that those apps get you will only be able to download via that account. You can change which account is logged in on the iPad via Settings > Store
-
my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?
That indicates a hardware failure. Read here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm. -
How can I use the button in one panel to control the other panel's appearing and disappearing?
How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle -
How can I use the mousewheel to scroll forward and back in Safari?
I really like Safari. As I see it, the only short coming is a feature that is present in Internet Explorer and Firefox. In both of these applications I can hold down a modifier key (CTRL) and roll the mouse wheel to go back 1 page in history. I would be really glad to know how to do this in Safari, as just about everything else I can do in IE and Firefox is in Safari. This roll back feature is one of the things I use more often than almost anything else.
Question: How can I use the mousewheel to move backward in the browser history?Yes, I could move my hand from the mouse to keyboard to use a key combo... I could even use the delete key... but it's not really as effient as using the mouse's scrollwheel. Not that it's really all that bad, since Firefox is a great browser, but am I stuck with it if I want that one solitary additional feature?
-
How can I use the battery and let it be perfectly healthy?
Hello everybody!
I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
(Right now I'm performing the battery calibration)
I'd like to know how can I use the battery and let it be perfectly healthy.
For instance,
1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
2) I usually use to calibrate the battery once a month... Is it a good thing?
Thanks!
AndreaEverything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
http://discussions.apple.com/thread.jspa?threadID=1764220 -
How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?
How can I use the "Correct camera distortion" filter and process multiple files in PSE 11?
Did you check the help page for Correct Camera Distortion and Process multiple file
Correct Camera Distortion: http://helpx.adobe.com/photoshop-elements/using/retouching-correcting.html#main-pars_headi ng_5
Process multiple files: http://help.adobe.com/en_US/photoshopelements/using/WS287f927bd30d4b1f89cffc612e28adab65-7 fff.html#WS287f927bd30d4b1f89cffc612e28adab65-7ff6 -
I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique and keep them separate. thank you for your help!
This should help:
How to use multiple iPods, iPads, or iPhones with one computer
Regards. -
My iPhone is from Japan and I want to activate it here in the Philippines because I'm living here. I have lost the original SIM from Softbank and replaced it with a new SIM card from Globe. How can I use the SIM card from Globe?
You cannot. The iPhone is locked to Softbank, and only they can unlock it. Problem is that Softbank will NOT unlock the phone, as they do not offer iPhone unlocking.
Buy an iPhone in the Phillipines.
PS Before you go on a rant at Apple, be aware that Apple does NOT unlock phones and they do not set unlocking policies. The carriers (Softbank in this case) set the unlocking policy. -
i bought something from game the game is Deer hunter i bought some golds and app store took money from my visa but i didn't find any golds that i bought ! please any help or how can i use the gold or restore the money? thank you
If you've been charged but not received the item then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
Maybe you are looking for
-
How to add an e-mail address from a message into a chosen address-book?
I have no use for "Personal Address Book": I imported my e-mail addresses from my Eudora address-books. As it is, it is quite cumbersome to add that address to the address-book that I want. In Eudora this was easy
-
Dynamic number of panelBoxes in panelDashboard
Hi, I got a scenario where I need to display a set of images in a particular order as like a chain.When the chain length is more than 5 it can display them in next rows but only in the chain order, and also the number of images is decided at runtime.
-
Query Tuning Assistance - part 1
Predicate Information (identified by operation id): 4 - access("FIN_TRANSACTION"."TRANSACTION_TYPE"="FIN_TRANSACTION_TYPE"."CODE") 7 - access("A"."CURRENCY_CODE"="S1_CURRENCY"."CURRENCY_CODE") 8 - access("S1_CURRENCY_A"."CURRENCY_CODE"="SA"."CURRENCY
-
Flashing charging light on nokia e7
if my e7 discharges till its battry empty it drives me crazy,when you connect the charger it flashes for seconds then displays the big NOKIA then the charging light becomes solid and when it finishes displaying the dots on the screen the charging lig
-
Trouble with a SONY HDV deck HVR-M10U
I have a DSR-11 that operates thru firewire. It works properly. A client recently loaned me an HDV deck and gave me some HDV tapes to digitize. So I plugged that into the deck's Firewire connection. When I do the EZ setup for the HDV codec, it sa