How can I use the "home" and "end" buttons

I have an external apple keyboard (full style, with number pad and all) plugged into my macbook.  However, the "home" and "end" buttons don't function the way I'd like (i.e. they don't go to the beginning or end of a line).
Can I ever get this to work or does it just not function with a laptop that doesn't have that function in the first place.  I'd like to not have to use multiple keystrokes just to get a similar home/end result.
Thanks!

"on your hub dont use the phone it will cost you more.when i change over to bt they never told me that i would be charged for useing this phone so i dont now.crafty bt again.when my contract is up i will be leaveing bt for ever,georgesaa."
Not sure why you are charged for calls on this, as standard you would get free evening and weekends and there are packages for unlimited anytime.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

  • How can I use the battery and let it be perfectly healthy?

    Hello everybody!
    I love this forum because everyone is a great helpful person.. .. However, I'd like to ask you couple things about the MacBook battery...
    I know that now the battery has been improved, it leasts longer and it can support 1000 charging cycles.
    (Right now I'm performing the battery calibration)
    I'd like to know how can I use the battery and let it be perfectly healthy.
    For instance,
    1) If I connect the laptop to the MagSafe and let it charge, when should I remove the plug from the Mac and when should I put it in charge? I don't wanna continously waste cycles and let my battery die too soon (it's too young to die! :-D ) .. I use it mainly at home connected to the MagSafe: someone tell that even if you leave the MagSafe connected after the mac has been charged it stops charging (I can see this), and others say that is not a good thing to let the mac connected to the plug for a long time... with the old model I used to disconnect the battery from the mac so I didn't have these problems but with the new one it's a long procedure...
    2) I usually use to calibrate the battery once a month... Is it a good thing?
    Thanks!
    Andrea

    Everything you need to know about your battery is contained in this User Tip from frequent poster neuroanatomist:
    http://discussions.apple.com/thread.jspa?threadID=1764220

  • How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

    With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
    Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
    Does anyone have a solution?
    Thanks in advance.

    Thank you very much. I'll be waiting for you message.
    Messaggio originale----
    Da: [email protected]
    Data: 26/01/2015 17.56
    A: "Umberto Gangi"<[email protected]>
    Ogg:  How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        created by Gilad D (try67) in Creating, Editing &amp; Exporting PDFs - View the full discussion
    Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, &amp; "Stop Following"
         Start a new discussion in Creating, Editing &amp; Exporting PDFs by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How can i use the boolean AND here?

    Hi,
    how can i use the boolean expression AND in order to include it in the expression below so as that 2 condition must be true in order to get the respective data from the database?
    java.sql.ResultSet res = statement.executeQuery("SELECT * FROM station9 " + "WHERE P =" + power);
    regards

    java.sql.ResultSet res = statement.executeQuery("SELECT * FROM station9 " + "WHERE P =" + power + " AND FLAVOUR = " + raspberry);

  • THe home and end buttons

    Just purchased a new iMac G5. For the longest time I was working on a keyboard
    that had "HOME" and "END" buttons. Very useful for the timeline. Can anyone give me the answer to the keyboard shortcut for those operations on the more condensed keyboards. This answer, for some reason, has been very difficult to find in a google search.
    Thanks,
    D

    Hi,
    The home and end keys are the directional arrows on the right bottom of the keyboard and you use the function button (fn) with them. In other words fn home or fn End.
    DM

  • How can I hide the "home" and "net" volumes in mountain lion

    I have a MacBook Pro that I updated to Mt. Lion.  The home and net volumes are now visible in the Finder at the root level.  They contain 0 bytes of data.  How can I make them invisible?

    Sometimes it takes me a while to remember this stuff. The issue is that these invisible folders are actually symlinks and not real folders. They behave differently. Here's something that used to work and may still:
    Open Terminal in the Utilities folder:
    cd /
    nano .hidden
    Press RETURN after each line. In the editor listing enter, one line each, home and net. CTRL+O to save the file. Now log out and log back in or restart. The files should be invisible.
    Beyond this requires downloading the XTools in order to use one developer tool not included with OS X.

  • I drop my iPod on the floor and now I only can use the home and power button and the screen won't work

    I Drop my iPod on the floor and now the screen won't work but it looks perfect but when I touch it it doesn't do anything and the home and the power button work so can someone help

    Try the remaining items of:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • How can i use the SNMP and TCP/IP together in Labview?

    I want to use the SNMP and TCP/IP together in the Labview to communicate between the two computers, If anyone know about it , please write back.
    Santosh Chavan
    IIT MADRAS.

    You can use LabVIEWs UDP functions to communicate with SNMP devices. The tedious part is converting the MIB information into the required hex message.
    There is also a problem in using the UDP functions on port 161 (default SNMP port) if the Windows SNMP services is running.

  • How does one use the middle and right buttons in AIR without the cursor showing?

    All I want to do is use all three botton clicks without the cursor showing (assistive technology situation). So I use Mouse.hide(). All works fine with the Left mouse button. With the middle and right buttons the cursor reappears as soon as the middle and right mouse is in the DOWN state (and stays visible until rehidden--see code). Are there Mouse parameters that could be added? (I can't find any such references.) Do I need to create a custom cursor Class that makes the cursor invisible at all times? Here is my simple AS 3 test code.
    // MyClickListener.fla
    // Using the Stage to listen for button events
    // Why do the Middle and Right clicks reexpose the mouse cursor as soon as the DOWN state is encountered?
    import flash.display.DisplayObject;
    import flash.events.*;
    import flash.ui.Mouse;
                Mouse.hide();
                var leftClick:int = 0;
                var middleClick:int = 0;
                var rightClick:int = 0;   
    function leftClickHandler(event:MouseEvent):void
                // Mouse.hide();   // I do not need this -- mouse cursor does not reappear
                trace(event.target.name);          
                trace("You pressed the Left Button.");
                leftClick ++;
                trace("Left Clicks = " + leftClick);
    function middleClickHandler(event:MouseEvent):void
                Mouse.hide(); //I use this to rehide the mouse that reappears after click.
                trace(event.target.name);
                trace("You pressed the Middle Button.");
                middleClick ++;
                trace("Middle Clicks = " + middleClick);
    function rightClickHandler(event:MouseEvent):void
                Mouse.hide();  // I use this to rehide the mouse that reappears after click.
                trace(event.target.name);
                trace("You pressed the Right Button.");
                rightClick ++;
                trace("Right Clicks = " + rightClick);
    stage.addEventListener(MouseEvent.CLICK, leftClickHandler);
    stage.addEventListener(MouseEvent.MIDDLE_CLICK, middleClickHandler);
    stage.addEventListener(MouseEvent.RIGHT_CLICK, rightClickHandler);
    Help appreciated.
    Thanks,
    Michael
    Message was edited by: MBM111

    Dear Tuttle and Tom:
    You both sent me to the appropriate place. I downloaded the instruction file (PDF). Many thanks.
    Incidentally, I then downloaded the upgrade offered at the top of that page (from v3.2 to v3.2.4) but after ±90% of the necessary time needed, it shut down with a "Failed to Mount" message (whatever that might mean). It took more than 28 minutes to download that much even though I'm using DSL! Have either of you upgraded to v3.2.4 with or without difficulty?
    Thanks again for your right-on assistance.
    PowerBook G4   Mac OS X (10.4.2)  

  • How can I make the start and end of a move smooth?

    In Premiere Elements 11 I often have zooms or pans which I want to begin gradually, then speed up slightly and then slow down as each one ends. I've tried every comination and permutation of temporal and spatial interpolation, and I still can't seem to get it quite right. Often I wind up with the image doing a graceful arc (no doubt the result of a bezier interpolation) rather than just moving in a straight line. Is there just a simple solution? I just can't stand having a move start and stop with jerky linear motion.
    Thanks in advance.

    Mark West
    To supplement prior information
    If you want to change what the clip rubberband represents, you can click on the tiny triangle next to the Timeline's clip's title.
    Please refer to blog post on Video and Audio Track Content Rubberband
    http://www.atr935.blogspot.com/2013/06/pe11-video-and-audio-track-rubberband.html
    In the case of a video clip, the default for its rubberband is Opacity. But that can be changed to Motion. As I wrote in the blog post
    The Motion Property options are Position, Scale, Constrain Proportions, Rotation, Anchor Point, or Anti-Flicker filter. The Opacity choice is just Opacity.
    Keyframing of these properties are reflected as white dots on the clip's rubberband and can be adjusted at that level.
    If you do not see the white dots keyframes in the clip's rubberband, then right click the file, select "Show Clip Keyframes", follow to Motion and Opacity, pick one, and follow to find your property named, and select it.
    At the rubberband level, right clicking a keyframe (white dot) there, offers opportunities for Linear, Bezier, Auto Bezier, Continous Bezier, Hold, Ease In, Ease Out, and Delete. If you select Bezier, do you see the keyframe handles?
    I have not done this, but you might want to see how much of the following you can get done in Premiere Elements using the Final Cut description of "Smoothing Keyframes with Bezier Hangles".
    https://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=67%26section= 2%26tasks=true
    ATR

  • The computer I use for Itunes only has XP so I can't use ICloud. My desktop has Vista so I can use it. But I don't want to lose all of what I have on my Iphone 4S and my two Ipads. How can I use the desktop and retain the apps, music, podcasts etc. I have

    The computer I use for Itunes (my laptop) only has XP so I can't use ICloud:(
    I have a desktop that operates using with Vista.
    I downloaded 10.5 and sought to sync my two iphones and two ipads with the desktop in order to use ICloud. However I got warning messages that if I synced with this computer that had none of my extensive library of apps, music, podcasts, etc. would be on it, I would lose it all.
    I did authorize the computer. I knew enough to do that but am terrified that I will lose everything that I have accumulated and still won't be able to use ICloud.
    Isn't there a way to do this? Shift my library FROM my devices to the desktop?
    Thanks

    This is a tedious solution, which is stupid!  And some users report an inability to reauthorize a computer after an "en masse” deauthorization.  I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
    And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge!

  • How can I use the F14 and F15 key for a shortcut?

    Hi folks,
    I've been trying to assign custom shortcuts to the F14 and F15 keys of my keyboard (wired, full sized type) on my Mac Pro 2008 running Mac OS X Lion 10.7.2 however every time I try to assign those keys to an app's "Record a shortcut" function I get the same error dialog from the OS:
    The key combination F15 can't be used!
    The key combination "F15" can't be used because it's already used by a system-wide keyboard shortcut. (If you really want to use this key combination, most shortcuts can be changed in the Keyboard & Mouse panel in System Preferences.)
    (note: the same happens with F14, F13 and lower as well as F16+ work fine however)
    I have looked into my system settings as the dialog suggests however there isn't a single shortcut that uses F14 or F15 anywhere in any of the shortcut groups.
    If any of you have an idea of how I could "clear" or even just find out what these keys are currently being used for/by that would be super… they don't seem to do or trigger anything when I press them.
    Here is another screenshot of the issue:
    Note: This is not app specific, I've tried this in various apps and every time I get the same Mac OS popup.
    Thanks for reading,
    I look forward to your ideas and insights!

    Hi,
    Use the step reference to get a PropertyObject reference using the Step.AsPropertyObject. With this PropertyObject reference you can then get the values of Limits.High and Limits.Low using the PropertyObject.GetValNumber() method.
    Limits.High and Limits.Low will be the lookup string for the PropertyObject.GetValNumber() method.
    Hope this helps
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • How can I get the start and end of a date range?

    Post Author: RobR
    CA Forum: Formula
    Greetings!
    I have a report whose records are selected if a date field is within the date range returned by the LastFullWeek function.  I want the header for that report to print the first and last dates in that range.  I don't see a way to extract those dates from a date range.  How do I do it?
    Also, I think it would be nice to be able to walk through a date range using a for loop, something along the lines of the following:
    for (thisDate in LastFullWeed)(    do something;)
    but I didn't see syntax like that in the help system.  If I could do this, then I could get the first and last date.  Is this possible?
    Thank you!
    RobR

    Post Author: SKodidine
    CA Forum: Formula
    If all you want is the starting date and ending date of the function LastFullWeek, then all you have to do is this:
    minimum(LastFullWeek) & '          ' & maximum(LastFullWeek);
    On a side note, from your post: for (thisDate in LastFullWeed)  Whatcha smokin'  Willis?? 

  • How can I use the procedures and functions in my library

    hello, all
    I have a pl/sql library MYLIB.pld, MYLIB.pll and MYLIB.plx.
    How can I invoke procedures and functions there in JDeveloper?
    Thanks.
    Damon

    I am indeed using ADF BC to re-develop the oracle application.
    Here is my situation:
    We have an oracle form application.
    Our objective is to try to re-use the existing sources in the form application as much as possible:
    1. tons of procedures and functions in a pl/sql library(a file with extension name portfolioLib.pll or portfolioLib.plx);
    2. tons of form-level triggers, data-block triggers and item-triggers;
    3. tons of database stored procedures and triggers;
    After doing a research on JDeveloper, we decide to use ADF Swing+ADF BC to re-develop the application.
    My opinion for the above three kinds of sources in our form application is:
    for 1: we try to move most of procedures and functions into database(except Form build-in);
    for 2: we try to wrap those triggers in a SQLJ class;
    for 3: we try to call database procedures and functions with PreparedStatment or CallableStatement;
    I just do a test on a post-query trigger on a data-block:
    I created a sqlj file, named testSQLJ.sqlj in the test.view package;
    I tried to call it in createInstanceFromResultSet of testDeptVOImpl.java which is test.model package,
    I was told that testSQLJ cannot be found there. why?
    How can I call some classes from test.view package in some classes of test.model?
    I read some documents about how to deal with post-query trigger in JDeveloper: create a view with SQL statement, but it seems that it does not support pl/sql statement there.
    Can you give me some opinion about the above stuff?
    I really appreciate your help.
    Damon

  • How can I use the /home directory

    I'm doing development work on my Mac (running Snow Leopard). The output location for the production server I use is under "/home/subdir". I'd like to develop my files on the Mac so they reside in the same relative location, but from the default install this is not possible.
    The /home directory is hidden by default. If I view hidden files, it looks like a mounted hard drive, but with no space. If I try to do something in the /home directory, I get "Operation not supported". For example, from the command line "sudo mkdir /home/test" returns "mkdir: /home/test: Operation not supported".
    (Originally, when I was useing Leopard, I moved the installed /home to /home_old and created my own /home directory, but the install to Snow Leopard reverted it back to the locked out /home dir. The other one was preserved, but it makes me nervous enough that I don't want to try it again without some reassurance.)
    So, the question: Is there a safe way to use /home on a Mac running Snow Leopard?

    Found the answer in another forum post here:
    http://discussions.apple.com/thread.jspa?threadID=2073807&tstart=0
    To get the /home directory back. Edit /etc/auto_master and remove or comment out the line that starts with "/home". Then reboot.

Maybe you are looking for

  • How to use new iCloud ID email address

    Hi, A while a go I changed my email address for my iCloud account by going on to the Manage Apple ID webpage, and the old email address was deleted. Since installing OS X Mavericks, I have tried to use keychain, which means I need to sign in to my ac

  • Problem with dissolves- FCP 7.03

    Hi, I am a sometime user of Final Cut 7.03, and I have noticed an occasional problem with transitions. Basically, what has happened is that I will get through with editing my sequence, and sometimes the dissolves I intended as "dip to color" end up c

  • How to make Photoshop Interface Black or change color?

    Hey guys, i have been watching videos and looking at images lately and i have noticed how some peoples photoshop interfaces are black and ive tried to find out and i just cant seem to figure it out, if you could please help me and figure it out that

  • Price in material master its URGENT

    Dear All, i m facing one problem, we are facing one problem. i have maintained standard price of material 15.50 INR but due to some client's requirement FICO consultant change some setting due to this it becomes 1.55 INR, when it come to know he agai

  • Export JPEG size

    Hi, can someone explain the following. I've just exported some photos for printing in Lightroom and set the size to 100% and the JPEG quality to 100%. On one photo the export size is 10.1Mb when I then open file and resave it, still keeping the image