How can I use the media Buttons on my M40X with WinAmp?

Hello
Today I got my M40X and i have a question.
There are 5 media Button left of the keybord (CD/DVD, Play/pause, Stop, <-/->)
Is it possible to use them with WinAmp?
In the Toshiba Assist i got the CD/DVD button used to start WinAmp (by use him to start a .exe) but the Play/pause...dont work. In the field media Apps the only Player i can choose is Win MP10 (I hate this piece of sh*t).
How can I use these Button with WinAmp?

Hello
As far as I know the Toshiba Controls were tested and designed only for Microsoft Media Player and WinDVD. How this topic says:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3621&messageID=11461#11461
I dont have any experience with WinAmp but I found useful info in this forum about this theme:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6673&messageID=24448#24448
Check this.
Bye

Similar Messages

How can I use the find button in Edit ADF Table in JDeveloper 10.1.3

Hi all,
in JDeveloper 10.1.3
How can I make the find button work in
the same Edit ADF Table without adding new view ?
thanks

Hi there,
it depends on what you mean by adding a new view object. You[b] don't have to create a new viewobject. You do have to add a second instance of your existing view object to your page.
Form scratch works more or less like this. Drop your view object as ADF table on the form. Add the find and execute operations. Drop the same view object on your form but now as ADF search form. Place the fields form the search form in the corresponding columns next to the existing fields. For each #{row} field ,and the find button, set the rendered property
#{bindings.testUserIterator.findMode ==false}. For each inputfield, and the execute, set the rendered property #{bindings.testUserIterator.findMode ==true}.
Now it will work.
I hope this is what you are looking for.
Good luck
Luc Bors

How can I use the speakers from my old iMac (with miniRCA? plug) on a new iMac

How can I use the speakers (M-Audio) from my old 24" iMac on a new 27" iMac? There is no jack on the new iMac - is there an adapter that will use the mini-RCA (?) plug from my old speakers to connect them to a new iMac? Thanks ...

Thanks again!
Hmmm ... I wonder. The input jack for external speakers quit working on my old iMac (it made lotsa static noise for a while when I moved the plug or computer, then quit working completely; I figure something inside the computer got loose or crapped out - and I'm too cheap/lazy to take it the 20 miles to the nearest shop that might fix it). When I plug the speakers into the headphone jack on the old iMac, I get very low volume or just one channel.
I don't have the new iMac yet, but I was hoping to use these old speakers instead of buying new ones. I will certainly try your solution - what do I have to lose? If they don't work, then I get new ones - or try something else.
Many thanks for your time!

How can I use the function keys in a GUI with swing?

I'm wondering how do you declare you want an action to happen when a user uses a function key or any key for that matter. How can you specify something frame wide or for that matter for a specific jtextbox?

you need to use an accelerator
setAccelerator(javax.swing.KeyStroke.getKeyStroke(java.awt.event.KeyEvent.VK_A, java.awt.event.InputEvent.SHIFT_MASK | java.awt.event.InputEvent.CTRL_MASK)

HT1491 I can't use the install button on app store with my iPad

When I go to the apps store or ebooks I cannot select a purchase. When I touch the buy button it doesn't do anything!

Try rebooting your iPad:
To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
Rebooting your iPad can solve a lot of problems.

How can I use the Windows 7 high contrast theme with CS6?

I prefer using a high contrast theme in Windows, as I find it reduces eye strain, unfortunately these themes don't work in InDesign CS6 (i've tested Illustrator, Dreamweaver and PS and they seem to handle the high contrast theme ok, but this forum doesn't quite like it either, but that could just be because I'm forced to use IE at work here)
Any text within dialogue boxes is black, and the toolbars and windows are pretty much unusable too.
Is there any way around this issue?

I see the same thing using a High Contrast theme. I think you're in uncharted territory here as far as what's been discussed previously on the forum, but maybe one of our other users also is a high contrast aficianado and has figured something out.

How can I use the Intelligent Instrumentation PCI 20001C card with DIAdem 6

I need to update my DIAdem Version 4.00 to 6.02. But there is no driver for my measuring card Intelligent Instrumentation PC20001C that i used with DIAdem 4.00.
What do I need to do?

I am not sure about version 6.02, but your card seems to be supported in version 8.
Check here for a list of supported hardware:
http://www.gfs-ac.de/english/index.htm
Click on 'Supported hardware" on the left in the 'Products - DIAdem" section and then choose your manufacturer on the right side. For II, it shows support for the PCI 20.001C-1 and -2 in version 8.
Let me know if you have any additional questions.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

Can I use the "same" button multiple times for multiple galleries?

OK so I am extremely untrained in CS4 and Actionscript. However I have managed to get along fairly well until I started to dynamically upload images as a gallery. This works great if I have one gallery, but for my site I have 9 galleries!!! I have a back and next button, but I want to be able to use those same buttons for all of the galleries so they look the same. I have split them up and renamed them, but I am clueless on how to script the buttons to work. Please help...and don't laugh at my poor scripting. This is what I have now because I do not know where to put the other button names without getting errors.
stop();
next_btn .addEventListener(MouseEvent.CLICK, nextImage);
var imageNumber: Number=1;
function checkNumber(): void{
    next_btn.visible=true;
    back_btn.visible=true;
    if(imageNumber==15){
        trace(imageNumber);
    next_btn.visible=false;
    if(imageNumber==1){
        trace(imageNumber);
    back_btn.visible=false;
function nextImage(evtObj:MouseEvent):void {
    imageNumber++;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();
back_btn .addEventListener(MouseEvent.CLICK, backImage);
function backImage(evtObj:MouseEvent):void {
    imageNumber--;
    mc_engagement.source= "photo/engagement/en0"+imageNumber+".jpg";
    mc_amish.source= "photo/amish/Amish"+imageNumber+".jpg";
    mc_chicago.source= "photo/chicago/ch"+imageNumber+".jpg";
    mc_landscapes.source= "photo/landscapes/land"+imageNumber+".jpg";
    mc_goodvsevil.source= "photo/goodvsevil/ge"+imageNumber+".png";
    mc_animals.source= "design/animals/an"+imageNumber+".png";
    mc_icons.source= "design/icons/icon0"+imageNumber+".png";
    mc_objects.source= "design/objects/pc"+imageNumber+".png";
    mc_typography.source= "design/typography/type"+imageNumber+".png";
    checkNumber();

I'm still a novice with Flash myself, but I have two comments.
First, at this point, won't your buttons control all galleries at the same time? Which means, if I go to image 5 in one gallery, then move to another gallery, I'll start at image 5, because the actions are all connected.
Second, you can definitely use the same buttons for multiple galleries. It seems to me that as long as you've assigned the buttons an instance name, these actions should already work to control all the galleries (see the note above). I guess I would need to understand a bit more about how your project is built.

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How can i use the same cursor in a loop fro multipletimes.

I am using two cursors.One to fetch sites and the other to fetch participants under each site.I am performing some job with that participants data.Now the problem is i am using the 2nd cursor in a loop.So it fetches the data of participants falling under one state.But when it comes to the second state,as the second cursor is already open it is unable to fetch the records.Please help me .How can i use the same cursor in a loop fro multipletimes.
I am sending the code which i have written in When-Button-Pressed-Trigger...
declare
     sid number;
     pid number;
cursor csid is select distinct(site_id) from cyber_ppt;
cursor cpid is select pc_id,st_dt,ed_dt from cyber_ppt where site_id = sid;
     stdt varchar2(10);
     eddt varchar2(10);
     nom number;
     stmonth varchar2(10);
     edmonth varchar2(10);
     cjan number:=0;
     cfeb number:=0;
     cmar number:=0;
     capr number:=0;
     cmay number:=0;
     cjun number:=0;
     cjul number:=0;
     caug number:=0;
     csep number:=0;
     coct number:=0;
     cnov number:=0;
     cdec number:=0;
     i number:=1;
begin
     open csid ;
     loop
     fetch csid into sid;
          exit when csid %notfound;
          message(sid);
     open cpid;
     loop
     fetch cpid into pid,stdt,eddt ;
     exit when cpid %notfound;
     message(sid||'-'||pid);
     stmonth:=substr(stdt,4,3);
     edmonth:=substr(eddt,4,3);
     nom:= months_between(eddt,stdt);
while i <= round(nom)
     loop
     stmonth:=substr(stdt,4,3);
if stmonth='JAN' then
          cjan:=cjan+1;
elsif stmonth='FEB' then
          cfeb:=cfeb+1;
elsif stmonth='MAR' then
          cmar:=cmar+1;
elsif stmonth='APR' then
          capr:=capr+1;
elsif stmonth='MAY' then
          cmay:=cmay+1;
elsif stmonth='JUN' then
          cjun:=cjun+1;
elsif stmonth ='JUL' then
          cjul:=cjul+1;
elsif stmonth ='AUG' then
          caug:=caug+1;
elsif stmonth ='SEP' then
          csep:=csep+1;
elsif stmonth ='OCT' then
          coct:=coct+1;
elsif stmonth ='NOV' then
          cnov:=cnov+1;
elsif stmonth ='DEC' then
          cdec:=cdec+1;
end if;
     stdt:=add_months(stdt,1);
     i:=i+1;
     end loop;
     end loop;
     end loop;
     end;


try this /* untested */
DECLARE
sid           NUMBER;
pid           NUMBER;
CURSOR csid IS SELECT DISTINCT(site_id) FROM cyber_ppt;
CURSOR cpid(nSid NUMBER) is SELECT pc_id,st_dt,ed_dt FROM cyber_ppt WHERE site_id = nSid;
stdt        VARCHAR2(10);
eddt        VARCHAR2(10);
nom         NUMBER;
stmonth     VARCHAR2(10);
edmonth     VARCHAR2(10);
cjan         NUMBER:=0;
cfeb         NUMBER:=0;
cmar         NUMBER:=0;
capr         NUMBER:=0;
cmay         NUMBER:=0;
cjun         NUMBER:=0;
cjul         NUMBER:=0;
caug         NUMBER:=0;
csep         NUMBER:=0;
coct         NUMBER:=0;
cnov         NUMBER:=0;
cdec         NUMBER:=0;
i            NUMBER:=1;
BEGIN
FOR rec IN csid
LOOP
                  sid := rec.csid;
FOR cRec IN cpid(sid)
LOOP
                 pid := cRec.pc_id;
                 stdt := cRec.st_dt;
                 eddt := cRec.ed_dt;
stmonth:= SUBSTR(stdt,4,3);
edmonth:= SUBSTR(eddt,4,3);
nom:= months_between(eddt,stdt);
WHILE i <= round(nom)
LOOP
          stmonth := SUBSTR(stdt,4,3);
IF stmonth='JAN'
THEN
         cjan:=cjan+1;
ELSIF stmonth='FEB' THEN
         cfeb:=cfeb+1;
ELSIF stmonth='MAR' THEN
          cmar:=cmar+1;
ELSIF stmonth='APR' THEN
          capr:=capr+1;
ELSIF stmonth='MAY' THEN
          cmay:=cmay+1;
ELSIF stmonth='JUN' THEN
          cjun:=cjun+1;
ELSIF stmonth ='JUL' THEN
          cjul:=cjul+1;
ELSIF stmonth ='AUG' THEN
          caug:=caug+1;
ELSIF stmonth ='SEP' THEN
          csep:=csep+1;
ELSIF stmonth ='OCT' THEN
          coct:=coct+1;
ELSIF stmonth ='NOV' THEN
          cnov:=cnov+1;
ELSIF stmonth ='DEC' THEN
          cdec:=cdec+1;
END IF;
         stdt:=add_months(stdt,1);
         i:=i+1;
END LOOP;
END LOOP;
END LOOP;
END;

How can I use the CAN MODULE in LABVIEW 6i?

How can I use the CAN MODULE in LABVIEW 6i?
HELP ME! PLEASE

Not sure what your real question here is, but I'll take a stab at it.
The NI-CAN drivers (module) only work with the NI CAN cards. If you have a different vendors card, you'll have to contact them to see if they have LabVIEW drivers.
If you do have a NI CAN card, then you just need to install the NI-CAN drivers and you're ready to go. Have a look at the examples for help in getting going.
If you're having a specific problem, please give us some more details and we may be able to help out a bit more.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

HT201269 how can i save the media by restoring my ipod 4 ?

how can i save the media by restoring my ipod 4 ?

Right click on your device in the device list and choose "transfer purchases", this will copy all bought media from the iTunes store to your computer.
For all other media you'll have to use 3rd party software, for example Touchcopy , just to name one of the many.

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How can I use the media Buttons on my M40X with WinAmp?

Similar Messages

Maybe you are looking for