How can i use the NI USB-6501 digital I/O with matlab?

I want to use the NI USB-6501 digital I/O with data acquisition toolbox in matlab?

The USB-6501 is supported by Data Acquisition Toolbox in MATLAB releases R14SP3+ and later.
The full list of National Instruments devices supported by Data Acquisition Toolbox is here:
http://www.mathworks.com/products/daq/supportedio14005.html
Begin to learn how to use digital input and output here:
http://www.mathworks.com/access/helpdesk/help/toolbox/daq/f11-17944.html
Inside MATLAB you can view demos in the documentation.
To see two digital demos you can type these commands at the MATLAB command line:
>> showdemo('demodio_intro')
>> showdemo('demodio_line')
Best regards,
Sherryl
Sherryl Radbil
Data Acquisition Engineer
The MathWorks

Similar Messages

How can I use an external USB drive on my Macmini with Boot Camp and Lion/Windows 7?

I have a MacMini (Last model with a disk drive). The Mini has Lion and Windows 7 installed using Boot Camp. I want to attach a 350GB, USB, HP Personal Storage Device (Hard Drive) to the computer and be able to use it in both Lion and Windows 7 mode. The USB drive is formatted for Windows 7. I only want to use it for storage and back-up purposes for both operating systems. It would be nice if I could access the total disk from either system without having to reboot to change operating systems to view Windows 7 files and reboot again to view Lion files. Can anyone offer any guidance or any informational websites to help me? Thank you for any help!!

Yes, you’ll be able to do that.
(116841)

How can I use the Unity Connection 10.5 Greetings Administrator with e.164 CallHandler extensions

We recently upgraded to CUCM 10.5 and CUC 10.5 using an e.164 dial plan throughout. One snafu that has surfaced is how do people access a CallHandler via the Greetings Administrator TUI if the CallHandler extension begins with a '+' character? Pressing and holding * does not seem to work. Any ideas?

We recently upgraded to CUCM 10.5 and CUC 10.5 using an e.164 dial plan throughout. One snafu that has surfaced is how do people access a CallHandler via the Greetings Administrator TUI if the CallHandler extension begins with a '+' character? Pressing and holding * does not seem to work. Any ideas?

HT4341 Can I use the 5w usb power adapter for iPad mini/ iPhone 4 in 220v with an adapter?

I will be traveling to Peru and have an adapter for the different prongs there, can I use the 5w usb power adapter that came with my iPad mini, or do I need to buy a converter as well for t their 220v?

The apple charger is rated 100V to 240V, 50/60 Hz. You can use it in any country.

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

How can I use the iPhone 4s as a usb drive?

How can I use the iPhone 4s as a usb drive?

I'm not sure about the original iPhone, I didn't have one, but the iPhone 3G did not have a disk mode feature.

How can i use the webcam in the VMware fusion?

I am using Windows XP with VMware fusion in my MacBook( OS X 10.5.1). Everything is good except the webcam. I have no idea how can I use the webcam(built in MacBook). Can someone give me more information about that? Thanks a lot!

Not sure I quite understood your question? However, I am running Win XP in VMWare Fusion an all the peripherals such as Bluetooth, IR Receiver and the webcam are identified as USB device and are therefore supported. No problem to use it with Messenger, Skype or Trillian. The only thing you have to do is to click on one of the small USB symbols in the lower right corner of the VMWare status line in order to enable it for the use in VMWare. That's it.
Hope this helps to fix your problem
Vitor

How can i use the amp designer or pedalboard for software instruments in garageband 10

how can i use the amp designer or pedalboard for software instruments in garageband 10?
and how can i customize the effects for the master track? in different factory presets are different effects, but how can i choose them manually?

hongconga wrote:
I want to record a podcast using my Mackie mixer and have the mix sent to Garageband through the USB I/0, but it doesn't seem to give me the option.
i think the first thing to do would be to check with Mackie support. two things noted on Mackie's website:
DRIVERS::
No Driver Required for Supported Windows (PC) or OS X (Mac) Versions
(note "supported")
and
For the Mac::
Mac OS X 10.4.11 – 10.7.1
ask if their firmware currently supports OS X 10.9.x

How can I use the free space of my Time Capsule as wireless HD ?

Hi,
Just set up a 2T Time Capsule and use it as Time Machine for my IMac and my MacBook.
How can I use the 1 Tb free space to ave data available from all my devices ?
Tks

thierry118 wrote:
Just set up a 2T Time Capsule and use it as Time Machine for my IMac and my MacBook.
How can I use the 1 Tb free space to ave data available from all my devices ?
Although it seems like you have a lot of extra space, Time Machine keeps versions, and if you want to take full advantage of the version history you should not worry about "extra space" because it will get used to provide safer coverage for the two Macs. If you had a Time Machine disk that fit your two Macs' hard drives perfectly, you would have no room for the version history, only room for the one most recent copy of each file. This can be a problem if you discover corruption that happened a while ago and cannot go back far enough in time to find an uncorrupted file.
Therefore it's better to not try and use up the "extra space" and let it be used for a longer, safer version history for your backups.
But like you, I want to use my Time Machine for additional network storage. So I plugged a cheap, compact hard drive into the Time Capsule USB port, and that shows up in File Sharing too. There is no need to buy anything fancier since it will be limited by both network speed and USB 2.0 anyway.

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How can I use the print module to print different size images on one large "canvas"?

How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
I was thinking the print module would do this automatically for me.

You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

How can I use the QR codes with my iPad 2. do I need to download first an app ?

How can I use the/read the QR codes with my iPad 2 ? Do I need to download an app ?

Yes. There are quite a few available for free in the app store

HT4314 I have a game under one account, now I have an Itunes card under a different account, how can I use the $$$ in the card for the game I'm playing, I need to purchase different items for my game.

I have been playing a game for a while under an account, now I have an Itunes card under a different account and would like to use that $$$ to purchase items for my game, but it doesn't let me because the game was downloaded under the original account. How can I use the $$$ in my new account?

same here but i cant purchase a movie or anything

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can i use the NI USB-6501 digital I/O with matlab?

Similar Messages

Maybe you are looking for