How can i use the same communication channel to place the file in 2 differe

Hello Guys,
We have a requirement where I need to archive the file that i am sending to the legacy FTP server in a Idoc to file scenario.
How can i place the file in 2 different locations. In this case place the file in the FTP server and a copy of it in the local NFS folder.

>
Rajeev kumar wrote:
> Hello,
> As per the standards we are supposed to use only one channel.
> that is one idoc, one message in the sxmb_moni.
Rajeev,
You can use an ftp job and save it on XI's folder.
Process the file into tmp directory on local file system and run operating system command to run ftp job to send the file to your file server and then copy the file to your archive folder and then delete the file from tmp.
This should solve your problem.
Regards,
AV.

Similar Messages

  • How can I use FaceTime between 2 I-Pads sharing the same email account

    How can I use FaceTime between 2 I-Pads sharing the same email address

    Cstearns-
    I only have one iPad, but was able to add myself to the list of Favorites.  When I tried to call, I was not available!
    You should also take a look at the Skype App for iPhone.  It works on the iPad, where you can choose 2X to expand the display.  I haven't tried to add myself to Skype, but have been able to have it connected on both my computer and the iPad at the same time.
    You might also consider getting a second address from G-Mail, just for use with FaceTime.
    Fred

  • How can i use both Windows and Mac os at the same time on my iMac

    How can i use both Windows and Mac os at the same time on my iMac

    You can use Parallels desktop or VM Fusion to run both operating systems at the same time. Both programs work well, but I personally perfer VM Fusion.

  • How can someone use a stolen iphone? does erasing the phone (which I feel like I should do) make it easier for the thief to use the iphone?  If I don't erase it, it doesn't seem like anyone should be able to use the phone because of my password.

    how can someone use a stolen iphone? does erasing the phone (which I feel like I should do) make it easier for the thief to use the iphone?  If I don't erase it, it doesn't seem like anyone should be able to use the phone because of my password. Also, is it possible to retrieve anything that has been sent to the phone (i.e. text messages) since it was stolen through icloud? The "find my iphone" app says the device is offline but it rings when I call my number -- any idea how that would be the case? Thanks!!

    You have a password, so good move on your part.  Whether you erase it or the thief does, they still get to use the iPhone as theirs.  Which is more important (pick one), protecting your data or punishing the thief?
    Ringing occurs at the carrier.  Chances are you're going to voicemail after only two or three rings.  If you have an iCloud backup also a good move.  Re-read my question in the first paragraph.

  • Living in Europe how can I use a gift card valid only on the U.S. iTunes Store

    Living in Europe how can I use a gift card valid only on the U.S. iTunes Store?

    Sorry...   iTunes Gift Cards are only Valid in Country of Issue.

  • How can I use a vector image to stretch with the backgrounds in Muse master pages?

    How can I use a vector image to stretch with the backgrounds in Muse master pages?

    Maybe there's a bug.  I think it's only showing it when it wants to because look:

  • So how can I use my iPhone or stream music on the ATV without having use of the computer?. I am limited I have wifi iPhone ATV and hd TV. My ATV has a setting for AirPlay as well. Please help :)

    So how can I use my iPhone or stream music on the ATV without having use of the computer?. I am limited I have wifi iPhone ATV and hd TV. My ATV has a setting for AirPlay as well. Please help :)

    Use AirPlay.

  • My gf is one of those ppl with the horrible habbit of downloading anything and everything the internet tells her she needs how can i use FF to better protect her from the various virus she downloads on a regular basise

    as i write this i have just restored my gf's computer back to default factory setings and cleaned the HD she has a horrible habbit of downloading anything and everything something tells her to download it her most recent actions caused her to dl a virus along with a prog called "flv tube" ive never heard of it but in less then 5 mins on google i found it to be common with viruses how can i use FF to prevent and or stop her from downloading all this crap so im not always having to fix it for her

    Public Fox: https://addons.mozilla.org/firefox/addon/3911
    Be aware that an extension can easily be bypassed by starting Firefox in [[Safe mode]] or by using the portable Firefox version.

  • HT2305 I PURCHASED AN ITUNES CARD FOR $50.00 IN THE USA WHILE I WAS ON VACATION  HOW CAN I USE THIS CARD WHILE I AM IN THE USA.    .......ELLIS

    I purchased an itunes card in the USA while on vacation for $50.00----how can I use the card while in the usa.....Ellis

    You will need to set up an account in the US iTunes Store to use that card, for which you will need a valid US mailing address. Note that the Terms of Use for the iTunes Store state that you will not attempt to use the US iTunes Store from any other country, so you will not be able to buy new items or re-download previously purchased ones from the US without violating those terms. So you may want to reconsider your purchase and perhaps return the iTunes card or sell it to someone who lives in the US.
    Regards.

  • How can I use Easy Custom Device Tool to do the same thing LabVIEW the Basic Averaged DC-RMS VI does

    I am using a cRio 9024 and am reading PWM with a 9205 analog input card.  It was suggested that I use the Basic Averaged DC-RMS VI to convert the PWM signal voltage into an analog signal (RMS value) for use in my system.  The issue is that the 9024 cannot use LabVIEW models (it is VxWorks). I am working through the Easy Custom Device Tool, and wonder if someone can guide me in the right direction.
    Solved!
    Go to Solution.

    Hello,
    Can you give more details about your VeriStand configuration ? Are you using the Scan Interface (and thus the Scan Engine Custom Device) or are you using the FPGA of your cRIO chassis to access the I/O ?
    If you are programming the FPGA and using a FPGA Personalty in VeriStand you can probably add the calculations such as RMS to the FPGA code directly.
    If you are using the Scan Engine, you will need a custom device. The Easy Custom  Device Tool is just a tool, you will need to know more about what a custom device is and how to develop one:
    - http://www.ni.com/white-paper/12712/en/
    Regards
    Eric M. - Application Engineering Specialist
    Certified LabVIEW Architect
    Certified LabWindows™/CVI Developer

  • How can i use imessage in iphone 4s is not the same as the iphone 4? sorry for my bad english

    iphone 4s

    but how it works in an iphone 4s because is different from the iphone 4 now that I have the 4s and i wanna send an imessage my friends receive the message as an email and he have the last ios and also have the iphone 4

  • How can I use two analog output channels simultaneously?

    I am using PCI6110 DAQ card. I want to run two separate VIs on one computer. Each VI output a waveform to one analog output channel. How can I do this simultaneously without interfering each other?
    Thanks

    Hi Stephen,
    This can NOT be done with two seperate VI's.
    The issue is in the hardware/driver.
    Your hardware has a clock that controls how fast updates to the AO occur. That clock can only have one value at a time. I will let your contemplate the complications that come up with two different clock settings being active at the same time (see below).
    So how do you work around this complication?
    You will have to develop a single VI that OWNs both output channels. That VI will have to accept start,stop,configure, etc commands from the two clients (what you will have to convert your existing VI's into). If you decide to place a restriction on the services you provide to the clients along the line of "only one sample rate at a time" you will be making your li
    fe much easier.
    If I was contracted by a customer to do what you have asked, I would try to combine the two existing VI's into one or simply buy a second 6110 and avoid all of the hassles. Both of these approaches would end up saving the customer money in the long run while freeing them of any restrictions that where established in order to develop the "server".
    I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can i use labview for communicating with pic18 microcontroller through usb port?

    Hi all,
    I want to make a DAQ card using pic 18 microcontroller which has a built-in usb protocol. I have the firmware of this
    controller which will  make it as a usb device. How can i receive the analog voltages from this DAQ card in Labview? or i mean to say that how i can communicate labview with the Pic 18 microcontroller through usb port? I have also the
    mpusbapi.dll file which is for Visual C++. Can i make changes in this dll file to make it compatible with labview?

    Which labview version do you have. Up to labview 7.1 it was no USB raw communication options. I have heard it did not work well in 7.1, but from 8.x most of the errors were fixed.
    Here is a link it should be useful http://forums.ni.com/ni/board/message?board.id=170&message.id=340676&query.id=365864#M340676
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • How can I use FaceTime to community with friend (with iPhone/ipad2 )?

    How can someone help m ?

    do I need to create another account with a different email account
    Yes, the email addresses need to be unique to each device. You may use the same Apple ID on each device, but the email address used by each device needs to be different.

  • How can I use charsets.jar without installing it in the client JRE?

    Hi! I've an applet that needs to do some CP850. Since many of the clients are from english speaking countries, they do not have the appropriate JAR that supports the CP850 encoding. Now, I have the charsets.jar which has this encoding. If I install it in the client jre/lib/ext folder, my applet works perfectly, but I don't want to do that. Instead, I want the applet to read it from its own jar or, including the charsets.jar in the archive parameter. I have tried both, adding the whole of charsets.jar to my applet jar using jar -xc dependences\charsets.jar, and also, by putting it in the archive parameter of the applet. None of them works, and I don't know why. If someone can tell me why it didn't work, and how can I make it to work, I'll be very thankfull.
    I've been trying also to use a URLClassLoader, but here I got access exceptions:
    URL urlCharsets = new URL("http://url.com/jars/charsets.jar");
    URL[] urls = {urlCharsets };
    URLClassLoader classloader = new URLClassLoader(urls);
                        classloader.loadClass("sun.io.ByteToCharCp850");Security Access exception here... and the charsets.jar that I'm loading IS signed. No idea what to do here.
    Best regards and happy new year!
    Message was edited by:
    obirenokenobi

    Hi,
    Assuming your applet jar and the charset jar are ine the same location on your
    server, I'll suggest to use this:
    <applet code="myapplet/myapplet.class" archive="myapplet.jar,charset.jar" height="400" width="550"></applet>Hope that help,
    Jack

Maybe you are looking for