How can I use two apple id's on one macbook air?

I have two accounts on my macbook air and two apple id's mine and my husbands. He has his set up on his account and I have mine set up on my account. Only problem is is that it seems we can only have one id associated with the computer at one time and to change it we have to wait 90 days.
How can I get around this?

One or both of you needs to buy your music on Amazon.  Then the re-downloading process will be from the Amazon Cloud, which, for obvious reasons, does not have any restrictions about Apple ID.

Similar Messages

  • HT5622 Can I use two Apple ID account in one device.  Are there irregularities

    Can I use two Apple ID account in one device. Are there irregularities

    You can use one ID for iTunes/iTunes Match, and another for iCloud, without any problems. You can add a secondary iCloud account in System Preferences (or Settings)>Mail, contacts and Calendars. Its data will appear alongside the main iCloud account though you cannot use PhotoStream with it.

  • How can i use a second external webcam on my MacBook Air 11

    How can I use a second external webcam with my MacBook Air 11" 2011?
    Are there specific compatible webcams?
    Can both cams be use at same time?
    How would I choose which cam would be the active one, for example with FaceTime or Skype?
    Thanks for any tips.

    paolo@spring wrote: How can I use a second external webcam with my MacBook Air 11" 2011?...
    Plug it in and launch the app you will use to run it.
    paolo@spring wrote: ...Are there specific compatible webcams?...
    Yes.  In general, any current USB model (will meet the "UVC" standard) can work on any Mac running Mac OS X 10.4.8 or newer.
    More specifically:
    (1) You have a choice of many Mac-compatible USB cam.  Some examples of current compatible cams are described at  http://www.mac-compatible-web-cam.com/.
    (2) If you want a wireless cam, consider http://ecamm.com/mac/webcam/bt1/
    (3) OS X already has everything it needs for Mac-compatible cams.  I recommend that you not add any OS X software that comes with your chosen camera to your OS X Mac, at least until you have tested your new cam without adding anything.
    paolo@spring wrote:... Can both cams be use at same time?...
    Multiple cameras can be connected at one time, but asking your Mac to actually use (capture and process) more than one video stream at a time might cause processor and data bus capacity problems.  The normal method is to connect your cameras and switch between them as needed, actually using only one at a time.
    paolo@spring wrote:... How would I choose which cam would be the active one, for example with FaceTime or Skype?...
    The software you use to operate the cameras controls that.  For more info, start with the answer in this topic link.

  • How can I use migration assistant to load my new Macbook Air?

    How do I use migration assistant to load my new Macbook Air?  Can this be done only wirelessly?

    No, you can transfer from a Mac wirelessly, wired ethernet, Thunderbolt or Firewire. Your older Mac must have the same connection, but you can use adaptors if necessary. For example, you can use an Ethernet cable with an Ethernet-Thunderbolt adaptor if your older Mac has an ethernet port.
    Wireless tends to be pretty slow (can take many hours) so it's recommended to choose a wired connection whenever you can.
    Here's more information:
    http://support.apple.com/kb/HT4889
    Matt

  • Can i use two apple id accounts on one iphone?

    I have an apple id with no money on it so i was wondering can i use mine for the free apps and use my dad's who has money on his to buy apps?

    You could... But...
    It should be Noted that anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622

  • How can I use two drop down lists for one time value?

    I want to enter the length of time that someone does an activity in hours and minutes using two drop down lists, then enter them as a single time value (H:i:s) in Mysql.
    I've used the basic drop down lists, and a few different variations of the following with no success (seconds is a hidden field with a value of "00"):
                           GetSQLValueString(strftime('%H:%i:%s', strtotime($_POST["sleeptimemin"]." ".$_POST["sleeptimehr"]." ".$_POST["seconds"])), "date"),
    This returns 00:00:16, no matter what is selected on the drop down list.
    Any help would be appreciated.

    MySQL stores times in human-understandable format, using the 24-hour clock.
    GetSQLValueString($_POST['sleeptimehr'] . ':' . $_POST['sleeptimemin'] . ':00', "date"),

  • Can I use two apple tv's with one itunes library?

    I have been looking for a way to store my DVD's on a hard drive and watch them via my Apple TV as they are taking up too much space on my shelves. My first thought was to buy a large external hard drive and rip the dvd's using Handbrake for my streaming to my Apple TV gen 3 but I remembered that I still have my original 160gig Apple TV gen 1 which pretty much works as a large iPod for movies when syncing content rather than streaming.
    So my plan would be :
    1. Rip and add the dvd's to my iTunes library
    2. Manually sync the movie files to the Apple TV 1
    3. Delete the movies from iTunes to avoid using large amounts of computer hard drive space.. (this shouldn't interfere with the content on the Apple TV as syncing manually)
    4. Connect the Apple TV to my TV to watch movies.
    Can I have both of my Apple TV's connected to my iTunes library?
    Are there any con's to using the old 1st gen Apple TV in this manner? For instance, I know there is no HDMI connection and the processor is older and slower than the newer versions.
    It would be a shame to not be able to put the 160gig of hard drive space on the older Apple TV to good use, especially as it still works perfectly.. and it was a refurb when I bought it!

    We cannot comment on your plans to copy DVD's but I have a number of Apple TV 1's, 2's and 3's all working together without a problem.
    On the idea of keeping your content on your Apple TV 1 and deleting it from iTunes, you may want to read my article on this topic.
    http://www.wls-churchill.co.uk/WinstonsTips/Remove_Content.html

  • How can I use my Apple ID with 2 Apple devices?

    I just got an ipad mini and I registered it with the same Apple ID I use for my iphone 4s. Everything was fine until I downloaded apps to the ipad and noticed that the ones I had on both devices  no longer opened on my iphone. Why is this? How can I use my Apple ID with 2 Apple devices and how can I recover my apps on my iphone?

    I've had an iPad for almost two years. When I purchased an iPhone last fall I set it up to use the same Apple ID as my iPhone. I've had no problems doing this. Try resetting each device and see what happens.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • How can I use two accounts ?

    How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

    Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

  • How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes?

    How can I use 2 Apple IDs in Itunes? I have 2 IOS Devices. They each have there own AppleID. What is the proper way to sync both of them to Itunes? I wanted my teenager's AppleID to be different from mine so that she couldn't charge stuff to my AppleID, therefore I created me another one. Now when I go to Sync either device, it tells me that this IOS device can only be synced with one AppleID. Then I get a message to erase it, not going to do that, lol. If I logout as one ID and login as the other, will it still retain all synced information on the PC from the first IOS device? If I can just log in out of the AppleID, then I have no problem doing that as long as the synced apps, music, etc stays there for both. I am not trying to copy from one to the other, just want to make sure I have a backup for the UhOh times. If logging in and out on the same PC of multiple AppleIDs is acceptible then I need to be able to authorize the PC for both devices. Thanks for the help. I am new to the iOS world.

    "Method Three
    Create a separate iTunes library for each device. Note:It is important that you make a new iTunes Library file. Do not justmake a copy of your existing iTunes Library file. If iTunes is open,quit it.
    This one may work. I searched and searched on the website for something like this, I guess I just didn't search correctly, lol. I will give this a try later. My daughter is not be back for a few weekends, therefore I will have to try the Method 3 when she comes back for the weekend again. "
    I forgot to mention that she has a PC at her house that she also syncs to. Would this cause a problem. I am already getting that pop up saying that the iPod is synced to another library (even though she is signed in with her Apple ID to iTunes) and gives the pop up to Cancel, Erase & Sync, or Transfer Purchases. My question arose because she clicked on "Erase & Sync" by mistake when she plugged the iPod to her PC the first time. When the iPod was purchased and setup, it was synced to my PC first. When she went home, she hooked it up to her PC and then she erased it by accident. I was able to restore all the missing stuff yesterday using my PC. However, even after doing that it still told me the next time I hooked it up last night that the iPod was currently synced with a different library. Hopefully, you can help me understand all this. She wants to sync her iPod and also backup her iPod at both places. Both PCs have been authorised. Thanks

  • How can i use my apple ID with the itune store over my windows laptop

    how can i use my apple ID with the itune store over my windows laptop

    If you don't have iTunes installed on your laptop then you can download and install it from here : http://www.apple.com/itunes/download/
    You can then log into your account on it via the Store > Sign In menu option (on iTunes 11 on a PC you can get the menus to show via control-B) :
    And you can then select the Store on the left-hand sidebar (you can enable the sidebar via control-S), and then browse items in the store and buy them by clickin on their price.

  • Can i use two apple tvs with one itunes account?

    can i use two apple tvs with one itunes account?

    yes and you can use more then 2
    just don't give them the same name

  • How can I use my Apple TV at a friends house ?? Is it not just a case of connecting to wifi then log on with my apple ID ?!

    How can I use my Apple TV at a friends house ?? Is it not just a case of connecting to wifi then log on with my apple ID ?!

    Thanks, I'll try it again. Was coming up on the screen saying something about cant work until the clock / time is configured or something ???

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • How can I use an apple id without visa or credit cards?

    How can I use an apple id without visa or credit cards?

    Choose the None (no credit card) option in the payment details.

Maybe you are looking for

  • Older PDF documents are not opening in .msg (outlook) format

    Hi, I'm using adobe reader 11 and outlook 2010. I converted all emails that need to be transferred to PDF and then 'delete' the original emails from Outlook.  It converts to pdf (so one pdf file can have 230 emails in them).  we then open the pdf whi

  • HT1926 Unable to download the latest version of Itunes

    I have never had any issues downloading Itunes before but when i try to download the most recent version I get the following error message. "The feature you are trying to use is on a network resource that is unavailable.  Click ok to try again or ent

  • Delete query taking long time

    Hi, I have a table containing around 0.25 million records. It has a time stamp column and its indexed. Now I am deleting records from this table older than one year. But this is taking more than 10 minutes. Since I am doing this thorough application

  • PipeLine Services and ABAP class

    Hi Experts, We know that  a XI message processed through various pipeline steps and an XI pipeline is a configured series of pipeline services,  can anybody please tell me is a pipeline service a particular ABAP class or something that performs a par

  • Canopus 110 and the dreaded "Cannot connect to device"  msg

    I am using Premiere Elements 2.0 with the Canopus 110 to make copies of my HI-8 and Beta tapes, and getting increasingly frustrated with the way PE 2 drops my temporary file and forces me to start the whole copy over again from the beginning every ti