How can i use two channels to show different voltages in DAQ ?

my problem is that when i choose different channels to read the outputs from my sensors, it ignores the channels which i have choosen 0 or 1 and it puts 0 channel only for both sensors. and the result is one same reading at both output guages, one reading is steady and the other is fluctuating. how can i make it recognize each one differently, is the proplem at my programme ? help me please
Attachments:
fin.vi ‏58 KB

Greetings,
AI Waveform Scan.vi and AI Sample Channel.vi each have a Channel(s) input. You do not have anything wired to these inputs. By default, these inputs are both Channel 0. You should wire "0" to one of these inputs and "1" to the other.
Good luck with your application.
Spencer S.

Similar Messages

  • How can I use more lines to show a field of a row in a report?

    How can I use more lines to show a field of a row in a report? Table A have two columns: (c1 number(5),c2 varchar2(1000)).When I show the table on a report,the column c2 show itself in one row.So the width of html page is very wide.How can I split the field c2 to many lines?
    Thanks for any help.

    I was wondering if an answer was found for this one.
    I have the same problem using the default "Look 4" template for the region. I have found in the CSS file where it is defined and it specifies "nowrap" in the style, which is why the long value is not being split over multiple lines.
    So, my question is, without modifying or creating templates, is there a way to override the "nowrap" attribute from within the item definition? e.g. in the Column Attributes.Column Formatting.CSS Style field. I had some success changing the display properties, such as background colour and font size but I can't seen to override the nowrap attribute!

  • How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

    How To Using Two Different Public IP Address on My DMZ with ASA 5520
    Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
    Hi everyone out there.
    can any one please help me regarding this situation that im looking for a solution
    My old range of public ip address are finished, i mean (the 41.x.x.0 range)
    So now i still need to have in my DMZ another two servers that will bring some new services.
    Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
    So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
    ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
    So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
    on Cisco ASA 5520 v8??
    How my configuration should look like?
    I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
    Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
    attached is my network diagram for a better understanding
    I thank every body in advance
    Jorge

    Hi,
    So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
    Now you have gotten a new public IP address range from the ISP and want to get it into use.
    How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
    To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
    So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
    Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
    Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
    Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
    Of the above ways
    The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
    The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
    Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
    I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
    - Jouni

  • How can I use two accounts ?

    How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

    Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

  • How can I use two monitors to increase workspace?

    how can I use two monitors to increase workspace?

    Drag the tabs of any After Effects windows you want to the second monitor.

  • How can we use two BOM

    Dear all,
    my scenario is in this way way-
    how can we use two BOM for same material.first BOM for inhouse production. Second one for Subcontracting.(means i have to create Purchase order for partial qty.

    Dear
    1.Goto MM02-MRP4 view -Maintain two Production Version based on two BOM ( Alternative1 with Routing will be PV1 will be used for production in house  where as Alt2 with routing having PP03 as control key for external operation -PV2 )
    2.Assign the relavant production Version-PV2 in Subcontracting Info Record in ME11
    Now, based on the production version assigned in Info Record system suggests the BOM while BOM explosion in Subcon Purchase Order
    REFER : Subcontracting & BOM  alternative
    Hope this will solve your issue
    Regards
    JH
    Edited by: Jiaul Haque on Sep 29, 2010 1:27 PM

  • Can I use two apple TVs in different locations in the same house?

    Can I use two apple TVs in different locations in the same house?

    Welcome to the Apple Community.
    You can use 2 or more Apple Tv's in different locations in the same house. You can even use them at the same time and watch the same content on each or choose different content.

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • How can I use two different Yahoo mail accounts ion Firefox?

    I have two Yahoo mail IDs. How can I use them both simultaneously on Firefox? Right now I am running Firefox and Internet Explorer so I can have the two accounts open at the same time. I would prefer to have both accounts running on Firefox, but I can't figure out how to do it.

    Multifox is an extension that allows Firefox to connect to websites using different user names. Simultaneously! <br />
    http://br.mozdev.org/multifox/

  • How can I use two displays with my Mac Mini?

    How can I connect two displays to my Mac Mini (newest generation with one thunderbold and one hdmi)?

    Have you tried connecting one to the HDMI output, and another to the Thunderbolt port (with the appropriate Mini DisplayPort-to-other connection adapter as needed)?

  • How can I use two database in Dataset in SSRS?

    Hi,
    I am using one query to generate my SSRS report. In that query I am using subquery. Now I am pulling data from multiple tales.
    DB used in sub query is different than the rest of the tables DB.(So total I am using 2 DB(Database))
    So I see that in SSRS, I can connect query(In DataSet Properties) to one DATA_SOURCE only, how can I use other database which is I used in sub-query?
    I have to move this SSRS into PROD and I can't hard code that sub-query's DB name in my query.
    Please give me suggestion. Thanks!!
    Vicky

    In SSRS 2008 R2 you can use the Lookup function (http://technet.microsoft.com/en-us/library/ee210531.aspx ) and LookupSet function (http://technet.microsoft.com/en-us/library/ee240819.aspx
    Depending on your security set up, you can reference a table in a second database on the same server using a three part name:  database.schema.table.  This is more likely to work for you if you wrap your SQL command in a stored procedure.
    Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

  • How can I use two differant iphones on one itunes

    I can i use two differant iphones on one itunes, and keep the content seperate?

    You can sync as many iphones/ipod/ipads as you like to one computer.
    Each is different and is recognized as such

  • How can I use two Airport Express N's together

    I have just purchased the new airport express n and I have the one that I am currently using which is also an n.
    How can I use both at the same time as part of the same network?

    If your goal is to extend the wireless range of one AirPort with another, check out this Apple Support article.

  • How can I use the same session for different components acroos application ?

    I am trying to include the components(chat, filesharing, whitboard) in different parts of my application. User should be able to access any of the component. We would like to have a single "ConnectSessionContainer" so that we don't see same user creating a seperate session for each component.
    Is there a better way of dealing with this other than declaring the "ConnectSessionContainer" in the main application ? Is there a way to check if we have a "ConnectSessionContainer" session already established ? Please help . Thanks.

    Thanks for the response. Let me explain what I am trying to do..
    I am trying to create components at different places(screens) of the flex application (not in the same .mxml file).
    Each time I create a component, I am using a "AdobeHSAuthenticator" and "ConnectSessionContainer" which is resulting a new participant in the room.
    For example
    screen1.mxml -
    <mx:Panel>
    <rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
    <rtc:ConnectSessionContainer id="mySession" >
            <rtc:Roster id="myRoster" width="100%" height="100%" />
            <rtc:Chat id="mychat" width="100%" height="100%" />
    </rtc:ConnectSessionContainer>
    </mx:Panel>
    screen2.mxml (in the same application) -
    <mx:Panel>
    <rtc:AdobeHSAuthenticator id="auth" authenticationSuccess="onAuthSuccess(event);" authenticationFailure="onAuthFailure(event);" />
    <rtc:ConnectSessionContainer id="mySession" >
            <rtc:SharedWhiteBoard id="wb" width="100%" height="100%" />
    </rtc:ConnectSessionContainer>
    </mx:Panel>
    Here, I open a screen1 and authenticate as UserA and when I try to open screen2 flex is considering me as another user though I am in the same application.
    1) How can I use different components which are in different flex files as a same User ?
    2) Should I place my <rtc:AdobeHSAuthenticator> and <rtc:ConnectSessionContainer> in the main application which calls the screen.mxml?
    3) What is the best way to do it ?
    Thanks for your time !

  • How can I use two analog output channels simultaneously?

    I am using PCI6110 DAQ card. I want to run two separate VIs on one computer. Each VI output a waveform to one analog output channel. How can I do this simultaneously without interfering each other?
    Thanks

    Hi Stephen,
    This can NOT be done with two seperate VI's.
    The issue is in the hardware/driver.
    Your hardware has a clock that controls how fast updates to the AO occur. That clock can only have one value at a time. I will let your contemplate the complications that come up with two different clock settings being active at the same time (see below).
    So how do you work around this complication?
    You will have to develop a single VI that OWNs both output channels. That VI will have to accept start,stop,configure, etc commands from the two clients (what you will have to convert your existing VI's into). If you decide to place a restriction on the services you provide to the clients along the line of "only one sample rate at a time" you will be making your li
    fe much easier.
    If I was contracted by a customer to do what you have asked, I would try to combine the two existing VI's into one or simply buy a second 6110 and avoid all of the hassles. Both of these approaches would end up saving the customer money in the long run while freeing them of any restrictions that where established in order to develop the "server".
    I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for