How can I use two I pod from 1 PC

I have two Ipods which i want to use from the same PC.One of them is already installed, but I wondered if i have to install an other software for the other one as well or is there a way I can somhow connect it to the same software which is alreadiy installed.I ve tried already but the new i pod doesnt appear i suppose untill I install it with a new software????
If anyone knows how can I have them both easily please let me know.
Thanks

Hi Krisztina:
Welcome to Apple Forums!
This may help: http://docs.info.apple.com/article.html?artnum=300432

Similar Messages

How Can i Use two Different Public IP Addresses no my DMZ with ASA Firewall.

How To Using Two Different Public IP Address on My DMZ with ASA 5520
Postado por jorge decimo decimo em 28/Jan/2013 5:51:28
Hi everyone out there.
can any one please help me regarding this situation that im looking for a solution
My old range of public ip address are finished, i mean (the 41.x.x.0 range)
So now i still need to have in my DMZ another two servers that will bring some new services.
Remember that those two server, will need to be accessable both from inside and from outside users (Internet users) as well.
So as i said, my old range of public ip address is finished and we asked the ISP to gives some additional public
ip address to address the need of the two new servers on DMZ. and the ISP gave us the range of 197.216.1.24/29
So my quation is, on reall time world (on the equipment) how can i Use two different public ip address on the same DMZ
on Cisco ASA 5520 v8??
How my configuration should look like?
I was told about implementing static nat with Sub Interfaces on both Router and ASA interface
Can someone please do give me a help with a practical config sample please. i can as well be reached at [email protected]
attached is my network diagram for a better understanding
I thank every body in advance
Jorge

Hi,
So looking at your picture you have the original public IP address range configured on the OUTSIDE and its used for NAT for different servers behind the ASA firewall.
Now you have gotten a new public IP address range from the ISP and want to get it into use.
How do you want to use this IP address range? You want to configure the public IP addresses directly on the servers or NAT them at the ASA and have private IP addresses on the actual servers (like it seems to be for the current server)?
To get the routing working naturally the only thing needed between your Router and Firewall would be to have a static route for the new public network range pointing towards your ASA OUTSIDE IP address. The routing between your Router and the ISP core could either be handled with Static Routing or Dynamic Routing.
So you dont really need to change the interface configuration between the Router and ASA at all. You just need a Static route pointing the new public IP address towards the ASA outside IP address.
Now when the routing is handled between the ISP - ISP/Your Router - Your Firewall, you can then consider how to use those IP addresses.
Do you want to use the public IP addresses DIRECTLY on the HOSTS behind the firewall?This would require you to either configure a new physical interface with the new public IP address range OR create a new subinterface with the new public IP addresses range AND then configure the LAN devices correspondingly to the chosen method on the firewall
Do you want to use the public IP addresses DIRECLTY on the ASA OUTSIDE as NAT IP addresses?This would require for you to only start configuring Static NAT for the new servers between the inside/dmz and outside interface of the ASA. The format would be no different from the previous NAT configuration other than for the different IP addresses ofcourse
Of the above ways
The first way is good because the actual hosts will have the public IP addresses. Therefore you wont run into problems with DNS when the LAN users are trying to access the server.
The second way is the one requiring the least amount of configurations/changes on the ASA. In this case though you might run into problem with DNS (to which I refer above) as the server actually has a private IP address but the public DNS might reply to the LAN hosts with a public IP address and therefore connections from LAN could fail. This is because LAN users cant connect to the servers OUTSIDE NAT IP address (unless you NAT the server to public IP address towards LAN also)
Hopefully the above was helpfull. Naturally ask more specific questions and I'll answer them. Hopefully I didnt miss something. But please ask more
I'm currently at Cisco Live! 2013 London so in the "worst case" I might be able to answer on the weekend at earliest.
- Jouni

How can I use two accounts ?

How can I use two accounts (mine and my wife's) to PhotoStream to my mac? I have to turn off photo stream for one or the other...can't I just leave two accounts logged on so that the photos from my iphone and hers both go to my mac?

Photostreaming across machines requires to use the same Apple-ID on all of these machines or devices. Share all of iclouds account stuff or nothing at all . No way around as icloud is designed that way. Photostream is not designed as a sort of gallery to share with outsiders. It is for your personal entertainment .

How can I transfer two user names from an iMac to a new macbook?

How can I transfer two user names from an iMac to a new macbook?
got a new laptop and need to transfer two usernames to it, complete with all documents help?

Assuming you haven't already set up a user, the easiest way is to use the Setup Assistant during first boot of the new Mac, with the two Macs connected by firewire.
You'll be prompted to migrate from a choice of sources - choose "from another Mac", select the catagories of data you want to transfer and follow the instructions.
More info here, in Pondini's FAQ; http://pondini.org/OSX/SetupAsst.html

How can I delete two .jpg files from my desktop that refuse to be deleted?

How can I delete two .jpg files from my desktop that refuse to be deleted?

The two icons refused to be moved to the garbage. The good part in all this is that ater I turned off the computer at night and turned it back on the next morning they were gone!
Thanks.

How can i use my iphone 4 from japan in india

how can i use my iphone 4 from japan in india

The only way to use an iPhone from Japan in India is to pay your Japanese carrier for international roaming. Japanese iPhones can not be unlocked.

How can I order two different calendars from iPhoto in the same order?

How can I order two different calendars from iPhoto in the same order?

You cannot - the "Buy Calendar" button is only available, while viewing one calendar. You can order more than one copy of the same calendar on one order, however.

I do not have a credit card how can I use the App Store from Belize

I do not have a credit card how can I use the App Store from Belize

iTunes gift cards.

How can I use two monitors to increase workspace?

how can I use two monitors to increase workspace?

Drag the tabs of any After Effects windows you want to the second monitor.

How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

HT201328 My iPhone is from Japan and I want to activate it here in the Philippines because I'm living here. I have lost the original SIM from Softbank and replaced it with a new SIM card from Globe. How can I use the SIM card from Globe?

My iPhone is from Japan and I want to activate it here in the Philippines because I'm living here. I have lost the original SIM from Softbank and replaced it with a new SIM card from Globe. How can I use the SIM card from Globe?

You cannot. The iPhone is locked to Softbank, and only they can unlock it. Problem is that Softbank will NOT unlock the phone, as they do not offer iPhone unlocking.
Buy an iPhone in the Phillipines.
PS Before you go on a rant at Apple, be aware that Apple does NOT unlock phones and they do not set unlocking policies. The carriers (Softbank in this case) set the unlocking policy.

How can we use two BOM

Dear all,
my scenario is in this way way-
how can we use two BOM for same material.first BOM for inhouse production. Second one for Subcontracting.(means i have to create Purchase order for partial qty.

Dear
1.Goto MM02-MRP4 view -Maintain two Production Version based on two BOM ( Alternative1 with Routing will be PV1 will be used for production in house where as Alt2 with routing having PP03 as control key for external operation -PV2 )
2.Assign the relavant production Version-PV2 in Subcontracting Info Record in ME11
Now, based on the production version assigned in Info Record system suggests the BOM while BOM explosion in Subcon Purchase Order
REFER : Subcontracting & BOM alternative
Hope this will solve your issue
Regards
JH
Edited by: Jiaul Haque on Sep 29, 2010 1:27 PM

How can I use two database in Dataset in SSRS?

Hi,
I am using one query to generate my SSRS report. In that query I am using subquery. Now I am pulling data from multiple tales.
DB used in sub query is different than the rest of the tables DB.(So total I am using 2 DB(Database))
So I see that in SSRS, I can connect query(In DataSet Properties) to one DATA_SOURCE only, how can I use other database which is I used in sub-query?
I have to move this SSRS into PROD and I can't hard code that sub-query's DB name in my query.
Please give me suggestion. Thanks!!
Vicky

In SSRS 2008 R2 you can use the Lookup function (http://technet.microsoft.com/en-us/library/ee210531.aspx ) and LookupSet function (http://technet.microsoft.com/en-us/library/ee240819.aspx
Depending on your security set up, you can reference a table in a second database on the same server using a three part name: database.schema.table. This is more likely to work for you if you wrap your SQL command in a stored procedure.
Russel Loski, MCT, MCSE Data Platform/Business Intelligence. Twitter: @sqlmovers; blog: www.sqlmovers.com

How can I use two different Yahoo mail accounts ion Firefox?

I have two Yahoo mail IDs. How can I use them both simultaneously on Firefox? Right now I am running Firefox and Internet Explorer so I can have the two accounts open at the same time. I would prefer to have both accounts running on Firefox, but I can't figure out how to do it.

Multifox is an extension that allows Firefox to connect to websites using different user names. Simultaneously! <br />
http://br.mozdev.org/multifox/

I just moved from Germany back to the USA. How can I use an German iPhone6 from T-Mobile in the USA

I just moved from Germany back to the USA. How can I use an German iPhone 6 from T-Mobile in the USA?

Was your phone locked to T-Mobile? If so, it needs to be unlocked before you can use it here. I believe you can use it with AT&T or T-Mobile here, but you won't get 4G/LTE speeds.
~Lyssa

How can I use two I pod from 1 PC

Similar Messages

Maybe you are looking for