How can I verify that I properly "SIM-unlocked" my IPhone 4?

As part of my service plan with Bouygues (France), I got an IPhone 4 which is "SIM-locked" and can not be used with another telephone operator.
After 3 months it is possible to organise the "SIM-unlocking" of the phone, free of charge.
I did so by contacting the customer support and performing the appropriate procedure with ITunes. Everything seems to have gone right, the IPhone 4 is as great a phone as it was before,
my question is simple, how can I verify that the phone is actually unlocked? a menu in the phone for example?
Patrick

Just put a sim from a different carrier in and try it.

Similar Messages

  • HT4859 How can I verify that my App data is actually stored in iCloud. With Dropbox, I can actually see my stored files. With iCloud, itseems I'm supposed 2 just trust that Appl has the data. Short of doing a restore is there no way to check the data?

    How can I verify that my App data is actually stored in the iCloud. I can see and access my notebook, contacts etc. on the iCloud website, and I can see my photos in a folder on my Windows-based desktop compter (iCloud/Photostream). But no app data.
    With Dropbox, I can actually see all of my stored files. With iCloud, it seems, I'm supposed to just trust that Apple has my back. Short of deliberately trashing my app data and then attempting a restore, is there no way to check the data?

    You can't access them on Windows (unless you have iCloud enabled Windows programs) and I don't think any are, yet.
    iCloud data is accessed via Apps/Programs, the Windows programs vendors will have to step up (just to make it worse Microsoft have not yet enabled their Mac programs, such as Office yet) I doubt that iCloud access is much of a priority for them, complain to MS, when enough Windows users complain maybe they'll do something.

  • HT3576 how can i verify that the network or firewall is not blocking access to port 5223.

    how can i verify that the network or firewall is not blocking access to port 5223?

    Talk to someone who knows something about networking and/or firewalls on an appropriate forum.
    Configuring your network and/or firewall is beyond the scope of this forum, which is devoted to issues using the iPhone.

  • How can I verify that iTunes charges are authentic?

    How can we verify that charges from iTunes are authentic when there is no record of them otherwise?

    If you purchased something, the charges are authentic.
    If you did not purchase anything, the charges are not yours.
    Contact Apple support and contact your credit card company.

  • How can I verify that backup media is workable?

    Dear Experts,
    I do backup SQL backup on Hard Disk everyday, then use NT BACKUP to external TAPE DRIVE, report is showing no any error and completed backup, questions, how can I verify that backup media is workable?
    Best and Regards,
    wilson

    Hi Wilson,
    In SQL Enterprise manager , there is an option to verify your backup .
    You need to enable this verification by checkting the box. If this option is enabled , after taking the backup , it will go for the verification and give you the result .
    If it is verified successful, it means, the backup has been written fine in the Tape/HDD , and it will be
    restored fine.
    Even if this verify option is done, SAP reccomends to perform a test restoration of the backup to a test
    system in order to make sure everything working fine .
    Regards,
    Nibu Antony

  • HT201328 How can we test that our phone is unlocked after we restore our iPhone?

    How can we test that our phone is unlocked after we restore our iPhone? I don't have access to another sim card at the moment. Only my AT&T sim card.

    A sure way to check is to connect the phone to iTunes on your computer and click Restore iPhone (not Restore Backup). If the phone is unlocked near the end of the Restore iTunes will display "Congratulations. Your iPhone is unlocked."

  • My iphone 5 was stolen today, I had it backed up last week, can I restart this back up on my other i phone which is i phone4? how can I do that as when I plugged my iphone 4 it backed up automatically

    My iphone 5 was stolen today, I had it backed up last week, can I restart this back up on my other i phone which is i phone4? how can I do that because when I plugged my iphone 4 to my laptop it backed up automatically and I can't seem to find the older back up or maybe I don't know where to find it?

    iTunes preferences>Devices>Should see the seperate backups there

  • How can i install my t-mobile sim card to iphone 4

    how can i install my t-mobile sim card to an unlocked iphone 4 gsm i got for Christmas?

    Power off the phone. Use a paper clip to pop out the Sim Tray. Insert a Micro-SIM from T-Mobile or a regular SIM cut down to size. Re-insert the SIM tray. Turn the phone back on.
    Keep in mind that 3G data, Visual Voice Mail, MMS messaging, and FaceTime will NOT function correctly on T-Mobile in the US. Some people report getting MMS to work, but you'll need to contact T-Mobile for assistance. T-Mobile in the US is NOT a supported carrier. Their network is not fully compatible with the iPhone.

  • How can i verify if my iPhone3 is unlocked?

    I have ahand-me-down phone currently with no service provider, I took it to the mall and paid to have it unloocked, how can I tell if it is actually unlocked so I can use it on a different carrier than the original?

    ONLY the carrier the phone is locked to can authorize unlocking it. You paid to have it hacked.
    You can not get help here for a hacked phone per the terms of service.

  • How can I verify that Adobe AE CC has properly updated to v12.2

    Adobe Updater keeps saying I have the latest version, but I'm not so sure.
    Here's why.
    The About box still shows AE version 12.0.0.404
    The file date for AfterFX.exe remains 5/23/2013 and also shows as version 12.0.0.404
    Features that are advertised as new in version 12.1 do not appear:
    (including: command for moving anchor point to center of content)
       4. Features that are advertised as new in version 12.2 also do not appear:
         (including: command for converting a parametric shape layer path to a Bezier path)
    That said, both AE and CC panel both show After Effects as being the most current (although they do not mention a version #)
    I have tried uninstalling, rebooting, and then using CC to reinstall, no change.
    I have also manually downloaded and installed the update to 12.2... no change.
    Any suggestions?
    TIA.

    //answering my own post below
    Last night I was notified by CC that AE had yet another update. Cool, maybe this one would be the one that would take. Nope.
    After applying the update, AE was still hung on version 12.0.0.404. Further frustrating was the contradictory assurance from the CC proggie that AE was indeed up to the most current version.
    How can this be? I wish I could say it was a stroke of genius on my part that solved the riddle, but it was really just dumb luck.
    While exploring the updates that I had previously downloaded, I noticed a subfolder in my download folder called "Adobe After Effects CC". Now this is on a completely separate drive than the one that hosts my working copy of AECC which was installed at, and is run from, the default location on my C drive. I peered inside the errant folder and saw what looks to be a viable install of AECC?! I verified the version numbers were correct on AfterFX.exe. For some reason that remains a mystery, Adobe CC had installed, without user initiative or notification, a second copy of AECC on a different drive and in a subfolder of my downloads folder.
    To fix the problem, I replaced the old files with the new ones, deleted a few plugins that have changed due to the updates, reentered my serials for a few plugins, and everything works as it should....... that is, until the next update
    Woohoo!
    TLDR; During a reinstall and/or update process, AECC may install to non-default location. If your updates have not applied, search your drives for an errant copy of AE.

  • How can I verify that my Apple Express is "absolutely" extending my Apple Extreme?

    Greetings,
    I purchased an Apple Express to extend my Apple Extreme due to intermittent Wi-Fi signal in part of my home.
    I connected it and it automatically configured the Express to extend my Apple Extreme.
    My question is how exactly can I verify absolutely that my devices (laptops, iPad's, etc.) are connecting through the Express and NOT the Extreme as they were before. (the Express is closer to all devices than the Extreme).
    There has to be a way to verify this, however, I can't find it through searching the web.
    To note, signal bars on devices have not and do not change.  Meaning they have 3 bars with, and 3 bars without, regardless.
    Thank you in advance.

    For Windows-based computers, try entering the following at the Command Prompt: netsh wlan show networks mode=Bssid|findstr "BSSID"  You can also try: netsh wlan show all
    This should provide you with a list of all Wireless Access Points that is detected by your PC.
    For the iPad, I am not aware of any built-in apps that will show this. However, apps, like Net Analyzer should do the trick. There's also a Net Analyzer Lite version for free.

  • How can I verify that Firefox Add-0n is safe if author not verified?

    I would love some Add-ons from Mozilla.com but when I click on download it says author not verified. How can I be sure it is safe and doesn't contain malware?

    When you call DIG_Block_Out, NI-DAQ first downloads your data into the 6534 memory. Only after the download is done (which should happen at about 80 MB/s) it starts outputting data and DIG_Block_Out returns. So it is safe for you to reuse your PC memory buffer as soon as DIG_Block_Out returns.
    This is assuming your entire buffer fits in memory. If it doesn't, NI-DAQ will download all the data that fits and start the transfer, and as more 6534 memory becomes available the DMA channel will fill it up.
    The 6534 has a 16 sample FIFO and an additional 32 MB of memory for each handshaking group. So for 32-bit transfers you can fit 8 MSamples, for 16-bit transfers you can fit 16 MSamples (per group), and for 8-bit transfers you can fit 32 MSamples (per group) in the 6534
    memory.

  • How can I verify that the PCI-6534 is using all of its onboard memory?

    When using a PCI-6534 under Windows 98 with NI-DAQ 6.9, I need to transfer a small buffer (8126464 bytes) to the adapter, and get it into the onboard memory. The board is configured for 32 bits output, and I'm using handshake mode. DAQ_GET_DEVICE_INFO tells me that there is 33554432 bytes for each Group. DIG_Block_Check shows that 2031587 words (8126348 bytes) are remaining to transfer. Is that in the PC system memory or the PCI-6534 on board memory? How can I tell if it is safe to reuse the (PC side) buffer? Also, How big is the FIFO on the PCI-6534?

    When you call DIG_Block_Out, NI-DAQ first downloads your data into the 6534 memory. Only after the download is done (which should happen at about 80 MB/s) it starts outputting data and DIG_Block_Out returns. So it is safe for you to reuse your PC memory buffer as soon as DIG_Block_Out returns.
    This is assuming your entire buffer fits in memory. If it doesn't, NI-DAQ will download all the data that fits and start the transfer, and as more 6534 memory becomes available the DMA channel will fill it up.
    The 6534 has a 16 sample FIFO and an additional 32 MB of memory for each handshaking group. So for 32-bit transfers you can fit 8 MSamples, for 16-bit transfers you can fit 16 MSamples (per group), and for 8-bit transfers you can fit 32 MSamples (per group) in the 6534
    memory.

  • How can I verify that an email was sent?

    I was an Adobe SendNow Outlook user until early this morning, when I had to send an important document for a meeting this morning. SendNow for Outlook informed me that it  just retired, and so I was directed to this Adobe Send cloud version.   I was able to go in and send my document. And later I found the new Adobe Send Outlook plug-in.
    But in the meantime, my recipient has not yet retrieved the document (according to the status). I'm wondering how I can verify/see the email I sent through Send. I don't see anything in the Adobe Send Cloud interface that allows me to see either the recipient email address or the text of the email. This seems to be an important component missing. Or am I missing something?
    Keith
    p.s. My recipient did finally view the document and I received my email verification, but I still can't seem to find the original text of the email!
    Message was edited by: Keith Jefferies

    Hi Keith,
    Please see this post, which addresses your question: Text body of Sent messages
    Please let us know if you have additional questions.
    Best,
    Sara

  • How can I verify that I'm running as an Administrator on XP

    Hi!
    I need to be able to verify from my Java program that I'm running as a user that has administration privileges. Does anybody have any tip on how to verify this? I can look in the registry if there is a registry key that will confirm this. My target platform is Win XP so a platform dependant solution is acceptable.
    Thomas

    Hi Keith,
    Please see this post, which addresses your question: Text body of Sent messages
    Please let us know if you have additional questions.
    Best,
    Sara

Maybe you are looking for

  • Table maintenance view - tcode

    Hi experts, We have a tcode (already in production) created for table maintenace view of z-table. Everything is working fine. Now I added one new field to the z-table and changed the table maintenance view accordingly. In SM30 I can maintain the tabl

  • Apple Hardware Test v2.0.1

    Hi, i need the Apple Hardware Test v2.0.1 for my Power Mac G4 dual 1,42 FW800. How can i get this? tom

  • Storage class not allowed in storage type

    Hi All, I am getting this error while confirming  the TO. It stays Storage class is not allowed in Storage type but how can  this be configured in OMM2. or do we need to define any sequence in OMLY.

  • Any of the Benefits idoc user exit

    Hi All, I am looking for the any benefit idoc user exit. We neeed to extend BENEFIT3 idoc, i was able to extend the idoc but dont see any user exit where i can def. my def segment. Not sure how it is working in other case. Does anybody has any idea a

  • Error while upgrading from WL8.6 to WL10.3

    Hi, I'm trying to upgrade WL 8.6 to WL 10.3. When i try to execute the Upgrade.sh, immediately i'm getting the following error "./upgrade.sh: /opt/app/bea/wls103/user_projects/upgrade_logs/domain_06222010_090215_1: cannot create"