How can Install Final Cut Studio in my Mac Pro Early 2009 ??

I have Final Cut Studio 7  NOT installed yet and Mac Pro Early 2009 with  OSX  10.9.5. I have Final Cut Pro X  Version  10.1.4 installed. Can I installed Final Cut Studio here together with  FCPX ?? Maybe not. What is the best way to install FCP Studio??
Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ??   10.6,  10.7,  10.8, 10.9  ??
Thanks for any help I can get
Alberto Marban

Here is the Best Practice Guidelines from Apple:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
MtD

Similar Messages

  • Cannot install Final Cut Studio on new Mac Pro

    When I go to install Final Cut Studio on my new Mac Pro, it tells me that "Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
    I have the ATI 5870 and, just a wild guess here, I'm betting it does support Quartz Extreme.
    A software update doesn't help me here because I cannot get the software installed the first place to be able to update it. What should I do?

    FCS 1...Final Cut Pro 5.0? Won't work on an Intel. PowerPC only. You need at least 5.1...which wasn't a free upgrade, so updating won't work. You need FCP 5.1, FCP 6 or the most recent FCP 7. Those are the only versions that will work on the newer macs.
    Shane

  • Error messages I when install final cut studio on my Macbook Pro

    Why am I getting error messages, I when install final cut studio on my Macbook Pro?  The Mac book Pro is a 2.5 ghz 17'.  The software; FC Studio is about a year old.
    Boe

    What error message(s) are you getting?
    Also, if you don't get an answer here, you might post in the FCS discussion.

  • Problem installing Final Cut Studio 2 on MacBook Pro

    I'm trying to install Final Cut Studio 2 on a MacBook Pro / Snow Leopard but when it comes to choosing install options Final Cut Pro is greyed out and just says skip.
    I've done some research and found people with the same problem but none of the fixes I've seen have worked. I also have Logic Pro installed - which I installed first - which seems to be causing the problem. I've tried removing Logic but am still seeing the same problem.
    Besides a clean install does anyone have any suggestions?

    Read this article on how to install final cut pro after logic studio.

  • Installation of Final Cut Studio on new Mac Pro

    Hello all,
    I have just purchased a new Mac Pro, and am preparing to install Final Cut Studio upgrade. The wrinkle for me is that I have Final Cut Pro 3.02 installed on an old G4 Power Mac. I have two video projects on the old computer, also backed up on external drives, that I want to be able to edit on the new computer.
    I am planning to install my old FCP software on my new Mac Pro, then install the FCS upgrade software. Is there anything I should know or do before doing this to make sure that I will not have any trouble either 1) installing Final Cut Studio upgrade, or 2) accessing my old FCP files.
    Many thanks in advance for your wisdom and assistance.

    I've successfully installed Final Cut Studio. Thanks, David, for the installation tip.
    Now I am holding my breath that I will not have any trouble copying scratch files for my most important projects to my second hard drive, or opening these projects on my new computer.

  • How can I Final cut studio 5.1 running on osx lion

    I have a old version (Final Cut Studio 5.1) and I would like to use with OSX lion. How can I make that run, don´t want to downgrade!!!!!

    I want a brand new Jaguar and a 4000 acre ranch in Wyoming.  But just like in your case, it ain't gonna happen.
    You'll either need to upgrade the software or downgrade the OS.
    -DH
    ps: for future reference, the Final Cut Studio forum is located here: https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
    This is the FCP-X forum.

  • How to install final cut studio on yosemite?

    Guys,
    Before I start my next video project, I want to do a clean install of Yosemite and also a clean install of Final Cut Studio with FCP 7. I'm running a Mac Pro, 2.26 quad core (2009).
    What's the best way to do this?
    I know some people have had problems installing FCP7 on Yosemite. Just to play it safe, I'm currently partitioning my drive and will install a boot version of Yosemite to try the FCS install on. If all goes well, I'll totally wipe the drive and install Yosemite.
    If things don't work out, I'll wipe the partition and stick to Mavericks.

    Insert the DVD.
    Click on the installer package.
    Follow the on screem instructions.

  • How to install Final Cut Studio on Mac OS X

    I have a Mac Pro with Mac OS X Lion. I want to reinstall Final Cut Studio comes with my mac. What to do?

    Insert the DVD.
    Click on the installer package.
    Follow the on screem instructions.

  • Re-Installing Final Cut Studio 5 on Mac OSX 10.6.8

    I used to use FCP 5 on my Mac using OS 10.5.8, after I upgraded to 10.6, I realize there's some problem opening FCP files,
    I tried to unistall and re-install FCP 5 on my Mac now, which is using 10.6.8 now, error message shows
    "Your computer does not have the hardware required to run this software.  See the Read Me for details."
    In addition to that, I had changed my display card from ADM Radeon 2600XT(which used to work) to NVIDIA GeForce 8800 GT; I'm not sure if that's also a cause, but I suppose not.
    Here's my config.:
    Mac:
      Model Name:          Mac Pro
      Model Identifier:          MacPro3,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.8 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per processor):          12 MB
      Memory:          10 GB
      Bus Speed:          1.6 GHz
    Graphic/Display:
    NVIDIA GeForce 8800 GT:
      Chipset Model:          NVIDIA GeForce 8800 GT
      Type:          GPU
      Bus:          PCIe
      Slot:          Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):          512 MB
      Vendor:          NVIDIA (0x10de)
      Device ID:          0x0611
      Revision ID:          0x00a2
      ROM Revision:          3233
      Displays:
    SyncMaster:
      Resolution:          1280 x 1024 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
    L222W:
      Resolution:          1680 x 1050 @ 60 Hz
      Pixel Depth:          32-Bit Color (ARGB8888)
    Thanks a lot!

    A follow-up question, I had it successfully installed and worked on the same computer with FCP 5 when the OS was 10.5.8.
    and is there anything can do to upgrade the FCP 5 to 5.1 (instead of buying a new version FCP x)?
    Thanks!

  • Final Cut Studio 7 and Mac Pro RAID recommendations

    I have a Mac Pro (early 2008) with 4 x 750gb SATA drives and 1 Promise DS4600 eSATA, decked out with 4 x 1TB 7200 RPM drives.
    I am considering the following setup for the disks. I am trying to make sure there is enough redundancy in the setup to survive a hard drive failure and enough performance to satisfy edit and uncompressed HD capture needs over a BlackMagic Intensity card (120mb/s required):
    1 x 750gb RAID1 System Drive - Macintosh HD (internal drives 1 & 2), block size 32kb
    1 x 750gb RAID1 for FCP Scratch - ScratchDisk (internal drives 3 & 4), block size 128kb
    1 x 2tb RAID10 for FCP capture - FCP Capture (Promise DS4600), block size 128kb over eSATA
    …purchase something for Time Machine backup or use CCC (external firewire800)
    Anything I've missed or anything I should or should not do? Thanks for the input.

    I know of audio folks that use mirror for live recording and editing, yes, but there they need multiple drives and to spread out their tracks and libraries and plug-ins, not HD video.
    There are excellent RAID6 card setups that make sense. And stick with quality drives.
    Audio high-end anyway use to mean SCSI and FibreChannel.
    So yes, move project files to RAID6 would be a good move. And do 'torture' the drives to death - BEFORE they are used - for like a week at least, to work and break them in and iron out any bugs.
    Use Enterprise RAID Enabled drives, stay off bleeding edge and use safe trusted and reliable equipment (drives, controller, software). One of the real "killers" is if you need new hardware, are forced into an OS that hasn't had a year of testing and your applications usually take 6-12 months (or more) to really be certified.
    There aren't a lot of RAID6 controllers, but there are some, and some SAS/SATA.

  • Can i install Final cut studio 5 and DVD Studio Pro 4 on OSX lion

    Is any body who can help me on giving me some direction on how to install Final Cut Studio 5.1 and DVD Studio Pro 4 on my OSX Lion, if it's doable. Thanks

    The easiest way is to install Rosetta from a Mac OS X 10.6 DVD first.
    There's also a way of doing it via Terminal that's been posted here a couple of times. A search should bring that up.
    Edit: Found it... https://discussions.apple.com/message/21416133#21416133 read the second post.

  • Can I install Final Cut Studio 3.0 after already having FCP X?

    I have already installed FCP X on one of my computers.  I need to install Final Cut Studio 3.0 on the same computer now. 
    When I tried to install, I get the selection screen and Final Cut is ghosted out and unavailable.
    Is there a way around this?  I know FCP X can co-exist with Final Cut Studio 3.0 if it's installed afterward, but I need to know if I can install Final Cut Studio after FCP X which I imagine is a fairly rare situation.
    I'm on Lion -- in case that matters.
    _Matt_

    I'm not positive, but I believe that FCPX installer is aware of FCS. If you intsall FCPX and FCS is already on your computer, the FCPX installer will move FCS into a folder inside Applications. I'm sure FCS installer is not aware of the existance of FCPX.
    I would guess that you would have to uninstall FCPX, install FCS and then, if you wanted, re-install FCPX, using the App Store.
    I have not actually done this, but I'm guessing that having FCPX already on your computer is what's causing issues with the FCS installer.

  • Problem Installing Final Cut Studio

    I am trying to load Final Cut Studio on my Mac Pro Tower and it told me that i need to have an Intel processor. How do I fix this problem?

    Understand that running the final cut apps on a g5 is not supported. The PPC architecture of the G5 is quite different than that of an intel machine.
    x

  • How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

    I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
    Does anyone know how I can obtain Rosetta? Or another way to install this without it?
    Thank you ! :)

    There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
    If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

  • How to get final cut studio 2 install disk to work on macbook air OS 10.8.4

    I just purchased a Macbook Air OSX Mountain Lion 10.8.4 and trying to install Final Cut Studio 2, however the install disk wont open using a superdrive.  How can I get my software loaded?
    Thank you.

    Try this forum:
    https://discussions.apple.com/community/professional_applications/final_cut_stud io
    Al

Maybe you are looking for

  • Need to hide "Evaluating Condition" text in dashboard in OBIEE 11.1.1.6.7

    Hi We are using OBIEE 11.1.1.6.7 version and we are getting a message "Evaluating condition" while running a report.This is due to the conditions specified in dashboard section(guided navigation in 10g). So i need to hide those text in obiee 11g .In

  • My Windows 7 XP laptop won't update to iTunes 10.7

    I just bought the iPhone 5, and in order to sync it with the iTunes on my computer I need to download iTunes version 10.7. However, I get the following error message midway through the process: "There is a problem with this Windows installer package.

  • CS5 Trial won't save.

    Hi guys, Just downloaded the InDesign CS5 30 day trail for my MacBook and I can't get any files to save. I opened a file that I had saved in CS4 without problem but I can't use the 'save', 'save as', 'check in', 'save a copy' or ' revert' functions.

  • SAP NW BPC 7.5 Queries !!!

    Hi Experts, I am working on a SAP NW BPC 7.5 project . I have few Queries related to it :-- 1. Suppose every day delta records are coming in BI Infocubes and  now we want to load delta records monthly into BPC infocubes. How do we achieve that in BPC

  • How validade fields in a query_find Block

    Hello for the Headstart Workers ! I dont know how validade fields in a query_find Block because we have no access to when-button-pressed of the button query item in time of Design Editor. Congratulations Nelson null