How can solve this ORA-03120: two-task conversion routine: integer overflow

Hello everybody,
I'm writing this query "SELECT rowid from <mytable>" and I get this error: ORA-03120
Does anybody know how can i solve it?
Thanks in advice

Here is the cause and action as suggested in the Oracle Error Guide...please see if it helps you to fix the error
ORA-03120:two-task conversion routine:integer overflow
Cause: An integer value in an internal Oracle structure overflowed when being sent or received over a heterogeneous connection. This can happen when an invalid buffer length or too great a row count is specified. It usually indicates a bug in user application.
Action: Check parameters to Oracle calls. If the problem recurs, reduce all integer parameters, column values not included, to less than 32767
Regards,
Murali Mohan

Similar Messages

  • ORA-03120 :two-task conversion routine:integer overflow Vendor code 3120

    Hi,
    I got below mentioned error message, while i run the procedure in sql developer
    ORA-03120 :two-task conversion routine:integer overflow Vendor code 3120

    What version of the database are you on? 9.2.0.8 for a guess?
    >
    ORA-03120 is associated with bug 5671074 on Oracle Enterprise Edition; Version 9.2.0.8, occurring on any platform:
    After applying the 9.2.0.8 patchset, compilation of functions and/or materialized view refreshes that reference remote databases via database links start failing with:
    ORA-04052: error occurred when looking up remote object [email protected]_OMPR_L.WORLD
    ORA-00604: error occurred at recursive SQL level 1
    ORA-03120: two-task conversion routine: integer overflow
    ORA-02063: preceding line from JEAUSER_OMPR_L
    Bug 5671074 "ORA-4052/ORA-3106 on Create / Refresh of Materialized View", can cause this problem. Contrary to the bug abstract and description, this bug does not just apply to materialized view creation and refresh. It can occur for any PL/SQL that references a remote object via database link where the 'Endianness' of the two platforms differs. If one platform is 'Big-Endian', and another platform is 'Little-Endian', then this bug can be triggered between them. A list of the endianness of different platforms can be obtained from the following query (note that the v$transportable_platform view is only available in 10.1 and above):
    To resolve ORA-03120, this solution is given:
    To implement the solution, it will be necessary to apply the one-off patch for Bug 5671074 to the 9.2.0.8 database. One-off patches to 9.2.0.8 for most platforms are already available for download on MOSC. Bug 5671074 to the 9.2.0.8 database. One-off patches to 9.2.0.8 for most platforms are already available for download on MOSC.
    >
    If not, post more information: {message:id=9360002}

  • ORA-03120: two-task conversion routine: integer overflow

    Hello DB Gurus!!
    Need your comments and help once again...
    I am trying to import a DUMP file into My Local Database ie. Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
    The file exported was by different user on different Dabase of Oracle 10g i.e. Oracle Database 10g Enterprise Edition Release 10.2.0.3.0
    but while I am trying to import, I getting the following error..
    Please help.. and suggest the alternate..
    Warning: the objects were exported by XYZABC , not by you
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    import server uses WE8ISO8859P1 character set (possible charset conversion)
    IMP-00008: unrecognized statement in the export file:
    . importing NEXOS_ADMIN_OLTP_API's objects into SHRICHANDRA_ABC123
    IMP-00003: ORACLE error 3120 encountered
    ORA-03120: two-task conversion routine: integer overflow
    . importing NEXOS_ADMIN_OLTP_TAB's objects into SHRICHANDRA_XYZ123
    IMP-00003: ORACLE error 3120 encountered
    ORA-03120: two-task conversion routine: integer overflow
    Thanks in advance..

    Thank Rajneesh,
    I suspect the same issue as you did, But unfortunately I don't have much option available, as other side all are production DB so All I can do is pull from there that is export and import to my local where I am stuck!!!
    Thanks..

  • Two-task conversion routine: integer overflow

    Hi!
    We're using JBuilder to connect an Oracle database remotely.
    Everything's fine when I do a stmt.executeQuery() with a single
    SQL command (like select field1 from table1). But when I use a
    SQL command using two or more fields (like Select field1, field2
    from table1) I receive the message "ORA-03120: two-task
    conversion routine: integer overflow".
    Can anyone help us with it ? We're needing this information
    fast for our graduation work of the college.
    Thanks!
    null

    I am using 8.1.6 database and 6.0.8.11.3 forms.
    I found that if I change the query stored procedure from passing the result set in a cursor variable, to a table variable the problem seems to go away. We are still testing though...
    When openning a cursor variable in a "open cursor_x for <select statement>" statement do you need to explicitly close the cursor?
    Thanks,
    Darryl

  • ORA-03120: two-task conversion

    Hi,
    I have been using OEE V8.1.6.0.0 on SUN solaris recently we installed OracleV8.1.7 on linux .I have been noticing following error message in webserver log at client end.
    "Error: ora8.c:2161:ora_get_row: error in `OCILobRead ()': ORA-03120: two-task conversion routine: integer overflow"
    I know patching the db at server end is solution.WOndering if anyone could help how to fix this problem without upgrdating at server end.Does any one have oracleV8.1.6 client on Linux ?
    Thx

    I receive the message "ORA-03120: two-task
    : conversion routine: integer overflow".
    I got this error message when I was parameters from
    a stored procedure and I had my parameter-ordinals
    reversed like this:
    if first parameter is string and second int for instance
    (I don't remember the actual call anymore) and I would get data
    with the following statements
    sText=stmt.getString(2);
    i=stmt.getInt(1);
    Hope this helps
    Jani
    null

  • I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?

    I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?

    Nope
    One needs to press the home and sleep / wake keys together for the phone to reset
    The other thing I could recommend
    Let the battery run out and the phone completely "die"
    It may take a day or two with it not being used
    Then plug it in to charge and see if there is any change in behavior
    If you cannot get this to work - you may need to bring it to an Apple store

  • When i go to new sms typing their is always show a text, how can solve this problem?

    when i go to new sms typing their is always show a text, how can solve this problem?

    Delete them and then download them from the desired Apple ID. This may require repurchasing paid applications.
    (95675)

  • Hi my iphone 4 is disabled how can solve this problem? help me please

    hi my iphone 4 is disabled how can solve this problem? help me please

    What do you mean by "disabled"? Disabled by entering the wrong passcode? If so, you'll have to force the phone into recovery mode & restore it to get it working again & remove the passcode:
    Turn your phone off, then force it into recovery mode & restore it:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • Ajax submit failed: error = 403, forbidden----how can solve this error

    Ajax submit failed: error = 403, Forbidden--how can solve this error to create a new eprintcenter account

    I am having the SAME problem.  This is so frustrating.   If i try to log on with teh user account I already have, I get the above message.  If i try to create a new accoutn it says the account is already existing.  If i click on forgot password, nnothing happens.  HELP!  I am stuck in a loop!!

  • How to solve this ORA-12154 problem please?

    Hello,
    I'm trying to execute the following command:
    C:\Documents and Settings\HP>sqlplus "sys/[email protected] as sysdba"
    SQL*Plus: Release 10.1.0.4.2 - Production on Dom Dez 18 02:45:37 2005
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12154: TNS:nÒo p¶de resolver o identificador de conexÒo especificado
    Translating: ORA-12154 TNS could not solve the conection identifier specified
    Informe o nome do usußrio:
    Translating: Inform the user name:
    How to solve this please because I get no other errors in the software.
    Thank you,
    André Luiz

    Hi
    If objective is to just connect as sysdba then you can simply check your SQLNET.ORA file under ORACLE_HOME\NETWORK\ADMIN and make an entry like
    SQLNET.AUTHENTICATION_SERVICES = (NTS)
    C:\Documents and Settings\HP>set oracle_sid=orcl
    C:\Documents and Settings\HP>sqlplus "/ as sysdba"
    Pls paste contents of your TNSNAMES.ORA and LISTENER.ORA files here.
    Rgds
    Adnan

  • After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

    after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
    How can I solve this problem?

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • My iPhone 3gs after update thane sim are damage and iTunes show locked, please help me, how can solve this problem? i am purchase from Sweden.

    My iphone purchages from sweden, when my ipone update latest vertion then sim cards damage and iphone monitor show itunes are loced. please help, how to solved the problem.

    Swedish carriers sell their phones carrier locked and do not offer official unlocking.  So unless you want to use it in Sweden with the original carrier you may as well sell it to someone who can use it there.
    Edit - I tell a lie, one of the carriers 3 do offer unlocking but not the others.

  • How can solve this problem?

    I want to burn a music dvd with *150 music video's* of .mpg and .avi files to a double sided 8.5mb dvd.
    iDVD or Toast will only let me burn *98 files at a time* and also does not let me adjust the *level of music or normalise the volume* so all tracks are at the same volume level.
    Can anyone suggest a Mac OS X program or solution that allows me do this, without having to edit each file?
    {;^)>
    <Post Relocated by Moderator>

    I have Not used this myself but I did a search and this is what came up:
    http://audacity.sourceforge.net/about/features
    http://www.hitsquad.com/smm/mac/AUDIO_EDITORS/
    http://www.apple.com/downloads/macosx/audio/wavepadaudioeditorformac.html
    Message was edited by: SDMacuser

  • My ipod touch shows itunes in the screen and is frozen how can solve this probleme.thank you

    my ipod touch frozen it just shooes i tunes,i dont know how to infreeze it.
    thanks

    thank you for your answer but i already did that,after i see the apple logo it comes again itunes and picture of usb on the screen.

  • Why when I try to buy a music on Itunes it says that occur an unknown error(-45054), and can't buy the any music. How can solve this issue?

    Please help as soon as possible. Thank you!

    Try repairing disk permissions in Disk Utility : https://discussions.apple.com/message/23478840
    If that doesn't fix it then try the suggestion a few posts further down on that thread by the same poster (wmark)

Maybe you are looking for

  • Can I add a Tivo codec to Premier Elements?

    I have Premier Elements 11, on a Windows 7 (64 bit)  machine. I also have Tivo Roamio, with their transfer software which will copy shows from the Tivo box onto my computer hard drive. I have recorded some movies I want to share with my kids when the

  • In which jar file  is he HttpServlet Class ?

    I've just downloaded J2SE 1.5. I haven't found a jar which contents classes such as HTTPServlet, HTTPSession, and so forth. I guess it is part of the "Sun Java System Application Server Platform Edition 8.1 2005Q2 UR2", but I do not need all these st

  • Performance issues to 3d rotated  graphic in a spark DG    renderer

    I tried animating a bunch of graphiccs in a spark dg, but its pretty much imposssible to get them to stay in sync with each other, why is the flash player so choppy at aninations? Im doing something like this, sorry if this idea of doing this in a re

  • I cant use my spotify account in Brazil.

    I used to live in the USA when I opened my spotify account. I have a PS3 also purchase in the USA where I access my spotify account. 3 years ago I moved to brazil and recently I was using spotify as I used to do but after a while I was no longer able

  • Cross Tab Top N Setting Programmatically

    <p>How can I set the value of N in the Sort Top N in the Group Sort Expert dialog programmatically for a cross tab object?  </p><p>Thanks,</p><p>-Carl</p>