How can we acess the data of one component into othr compnent in webdynpro?

How can we acess the data of one component into other component in webdynpro....
I need an Field input from one webdynpro component(comp1) which is away from the line of process to the other component(comp2) we need that data........I mean i need the field info of comp1 where we doesn't navigate through the Comp1 in the portal & directly access the component comp2.........kindly share your ideas.....and possible ways .........
any doughts do post.....
thanks in advance!

Hi Reddy,
You can do it in multiple ways. One way would be to try transfer the parameters through URL & the other would be to work with the concept of interface nodes. Please try go through these 2 threads ( [Thread 1|Call view of another WDA Component and pass the value to it; & [Thread 2|navigation from one program to another; )where I have explained about working with Interface node in detail. You can refer to this [thread |receving parameters between two standard webdynpro applications;to see as to how you can do the same via parameters in URL.  Hope it would help resolve your problem.
Regards,
Uday

Similar Messages

  • How can we acess the data of one component into othr component in webdynpo?

    How can we acess the data of one component into other component in webdynpro....
    I need an Field input from one webdynpro component(comp1)  which is away from the line of process to the other component(comp2) we need that data........I mean i need the field info of comp1 where we doesn't navigate through the Comp1 in the portal & directly access the  component comp2.........kindly share your ideas.....and possible ways .........
    any doughts do post.....
    thanks in advance!

    Hi,
    Please post your query in forum Web Dynpro ABAP Forum, under Application server.
    You have to define the source component as in the used component in the target one to do that.
    after that you will be able to get data from that component.
    Regards,
    Vaibhav

  • How can i change the data from one Time Capsule to another?

    How can i change the data from one Time Capsule to another?

    Do you mean copy it?  If so, see #18 in Time Machine - Frequently Asked Questions  You'll need section 2 there.
    If you mean something else, please clarify.

  • How can i import the data from multiple sources into single rpd in obiee11g

    how can i import the data from multiple sources into single rpd in obiee11g

    Hi,
    to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
    tnx

  • How can i pull the value of one cell into the cell of another table?

    I want to pull the value (the result of a =SUM(x) formula as the starting value of a column in another table.  How can I do that?

    Yvan KOENIG (VALLAURIS, France) vendredi 10 février 2012
    iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
    My Box account  is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

  • How can I load the data of Manager Beans into an Array?

    Hi all!
    I have a problem when use the ADF model layer (JDeveloper 10g). I want to load the data of a Manager Bean into Array(such as: Array in JavaScript).But I don't know any ways to do.
    Are there any ways to do that?
    Please, help me!
    Thanks so much!

    Hi,
    there is a fundamental difference between an array in Java and an array in JavaScript as the latter is added to the output page while the first sits in a Java class on the server.
    Populating a Java array from a managed bean is straight froward: Just create the Array, loop through the source of the data - ADF binding or the ADF Faces table component - and fill it.
    For a JavaScript Array I would suggest to write the array into a js file and reference it from the web page (which might cause concurrency issues).
    Frank

  • Reading the data from one component view into another component view

    Hi All,
    I have requirement to read the data from one component into another component while creating the service order. Here are the details.
    Main View for Service order: BT116H_SRVO in that we have two assignment blocks like Organizational data(BTORGSET) and amount allocation(BTAMNTALL).This two blocks are two different component which are associated with main component(BT116H_SRVO).
    I need to read the sales org data from component/View(BTORGSET/Orgsetdata) into Component/View(BTAMNTALL(HdrBillPlanDet) method DO_VALIDATE_INPUT.
    I searched in SDN but all the posts are related to the data exchange between two views in same component. But My scenario is different as explained above.
    Refer the attachments for the component link..
    Please let me know how we can achieve this one..
    Thanks,
    Sapsar.

    Finally I was able to fix my code...My Mistakes were need to read the parent node above three levels and need to use the relation entity name while reading the data..
    Below is the correction code
    IF iv_index IS NOT INITIAL.
         lr_iterator ?= collection_wrapper->get_iterator( ).
         lr_current ?= lr_iterator->get_by_index( iv_index ).
         lr_entity ?= lr_iterator->get_by_index( iv_index ).
       ELSE.
         lr_current = collection_wrapper->get_current( ).
       ENDIF.
    *loop back to root entity
             WHILE lr_entity->get_name( ) NE 'BTAdminH'.
               lr_entity = lr_entity->get_parent( ).
             ENDWHILE.
    *Get the related entity
             IF lr_entity IS BOUND.
               lr_collection ?= lr_entity->get_related_entities( iv_relation_name = 'BTHeaderOrgmanSet' ) .
               IF lr_collection IS BOUND.
                 lr_orgset_m = lr_collection->get_current( ).
    *            lr_orgset = lr_orgset_m->get_related_entity( iv_relation_name = 'BTOrgSet' ).
                 lr_orgset = lr_orgset_m->get_property_as_string( 'SALES_ORG' ).
               ENDIF.
             ENDIF.
    Thanks,
    Sapsar.

  • How do I extract the data of Variant configuration into internal tables

    Hi Experts,
    How can I extract the data of variant configuration into an internal tables while preparing the report.
    Thanks,
    bsv.

    Hi i´m not a "Expert.." but may I can help you:
    CUCB_GET_VALUES_FROM_INSTANCE
    Example:
    Instance =  MARA-CUOBF  or
    Instance = lips-cuobj
    Result is the data of the Variant tables.
    I need that for a simple report to evaluate customer & and his Variants......
    Robert

  • HT201269 how can I transfer the data of my old iphone to the new one?

    I have skipped the setup part of the new iphone, how can I transfer the data of my old iphone to the new one?

    iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device - http://support.apple.com/kb/HT2109

  • I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    I have Time Machine that I used to back up my old computer. It was running snow leopard. My MacBook died, so I got a new one which is running Lion.  how can I restore the data from the time capsule to my new Mac?

    In technical support, sometimes you have to make educated guesses. I'm sorry that you were offended.
    iTunes does prompt when it is going to erase a device, and the message is clear.
    She said in her message that she was able to successfully sync the old ipad. This indicated to me that itunes wiping the data was not an issue, because either it had been setup at the apple store (in which case it doesn't actually wipe the ipad despite saying it will*) (*based on a single case I saw), or because the itunes media folder was migrated.
    Furthermore, my solution was to tell her how to backup her ipad (by either doing it manually, or as a last resort, by deleting the corrupt backup -- that she couldn't access anyway.)
    I got that last part of the instructions from the "Taking Control of your iphone" book which I found samples of when I did a google search for "corrupted backup itunes".
    She marked this as a solution, so it worked for her.

  • In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)

    In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
    == This happened ==
    Every time Firefox opened
    == I upgraded to Firefox 4 (beta)

    Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
    You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on.

  • My parents have one apple id and me and my two other siblings are getting our own. How can I transfer the data saved on the parent apple id to all three kids apple ids?

    Me and my siblings all want our own apple ids, and my mom has the apple id that has all of our games, apps, movies, and music on there. how can we copy the data onone apple id to the three kid accounts?
    thanks!

    Sorry, but unless I misunderstand what you're asking, you can't. Purchases from the iTunes Store are permanently tied to the Apple ID through which they were purchased. If your parents want you to be completely independent of their Apple ID and iTunes Store account, you'll each have to re-purchase the apps, etc. Otherwise they'll have to continue to allow you access to their account, or will have to do all the updates for you.
    Regards.

  • How can i get the date of the last update of one PL/SQL package ?

    Hello,
    How can i get the date of the last update of a PL/SQL package
    named MYPACKAGE ?
    Thanks in advance ! ;-)

    to get the timestamp,last ddl time of object
    select timestamp,last_ddl_time from user_objects
    where object_name='<package name>';
    this will give you last transaction time ,date of object

  • How can I display the data in table in separate column?

    I have a vi reading data one by one in the same column.
    How can I display the data with separate column?
    like this:
    data 1 | read | read
    data 2 | read | read
    data 3 | read | read
    (would you mind if I will ask for an example
    because it is much easier for me to work
    with an example)
    THANK YOU.

    If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
    Attachments:
    Data_Column_Example.vi ‏18 KB

  • How can we delete the data in e-fact table.

    how can we delete the data in e-fact table.

    hii,
    You cannot delete the request individually but you can one of the following:
    1. Do a selective deletion from the cube. RSA1 -> Cube -> Contents -> selective deletion.
    2. Delete all the data in the cube and then reconstruct only the required request ids. This would work only if you have the PSA available for all the requests.
    3. Reverse posting is another possibility.
    hope it helps,
    partha

Maybe you are looking for

  • Need you help !!! -- How to set PACKAGE SIZE in CURSOR?

    Dear experts: Does anybody know how to set the package size if you use cursor in your abap program? My scenario is to select all the data from MARA table in which the data volumn is very big, and then process for some specific logic. When I try to se

  • Validate Oracle Apps Username and Password via ADF?

    Hello. I'm trying to verify a persons user id and password in ADF 11g. I snagged the FND classes to be able to do this, and am calling it as follows: AppsContext ac = new AppsContext("/home/workspace/idev.dbc"); boolean loginStatusCode = ac.getSessio

  • HT5463 I'm not receiving any sounds at all

    I don't want to have 'silence' only while iPhone is locked, but I can't change it, the only alternative is 'Always' and i dont want that either!  How can I enable all sounds while the phone is locked?

  • Connecting a Mac Pro to A printer on local windows network

    I apologize in advance if this question has been asked/answered before. I couldn't find in forum. I am trying to connect my MacPro to a network printer on a windows computer set up for printer sharing. I have tried everything [all OSX help files, net

  • Help with data.

    Sorry my english. I have a table like: MFR                 Model                   Color Nokia              1020                     Red Samsung         Galaxy S5             White HTC                 One(m8)               Black Which function I must