How can we create the DBC file?

Hi all,
I am attempting to run the test_fwktutorial.jsp within the toolbox.jws/Tutorial.jpr project in Jdeveloper . We have to provide the Oracle application DB connection in the project properties ( we have to provide this as a DBC file) . How can we create the dbc file from the Database connection ? i tried to export the DB connection in Jdev , but it is getting exported to xml file rather than dbc file . Please help to fix this.

Yes, you can do that.
Put both the DBC files under dbc_files\secure folder.
You can change the dbc files from project settings and point to the desired file.
I am not sure, but maybe you need to stop JDevloper and start again for the new DBC file to take effect.

Similar Messages

How can we cretae the DBC file?

Hi all,
I am attempting to run the test_fwktutorial.jsp within the toolbox.jws/Tutorial.jpr project in Jdeveloper . We have to provide the Oracle application DB connection in the project properties ( we have to provide this as a DBC file) . How can we create the dbc file from the Database connection ? i tried to export the DB connection in Jdev , but it is getting exported to xml file rather than dbc file . Please help to fix this

Yes, you can do that.
Put both the DBC files under dbc_files\secure folder.
You can change the dbc files from project settings and point to the desired file.
I am not sure, but maybe you need to stop JDevloper and start again for the new DBC file to take effect.

How can i create my own file from the Adobe Export PDF to Word ?

How can I create my own file from the file of the Adobe Export PDF to Wodrd?

If there is handwritten content in your PDF then ExportPDF can't convert that to word.
~Deepak

HT4075 I don't have any problems merging the documents by dragging, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I tried save and export, how can I create the file after merging?

Hi, I'm having trouble saving the documents when merging in Preview. I don't have any problems merging the pdf documents by dragging them in preview, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I've tried save and export, but none merge the documents after saving... how can I create the file (with all the pdf files) after merging?

That's a comment in the file. It has no effect at all.

How can I create an Excel file?

Hi,
How can I create an Excel file using Forms 6i.
What I'm doing is to create a file using TEXT_IO package an name it .XLS. If a read it double-clicking over the file, it opens Ok but If I open directly from Excel it opens the Convert dialog.
I need to create an excel file as it was made from within Excel.
Thank in advance,
Benjamin

When you are talking about subfiles, are you talking like Package contents of an application?
Terminal application in Applications -> Utilities can give a command line grasp of all your files using the du command.
Type
man du
when entering the terminal, followed by the enter key.
Note, by default the terminal opens at the Home folder. To navigate outside the Home folder enter "/Volumes/name of mounted drive/folder/subfolder" as your path. If there are spaces in the name, putting quotes around the whole path can help. If you end your du command with a > name.txt a text file with the name name.txt will be plugged into your Home directory. That you can open with Excel and parse by /es thus giving you everything in Excel.

How can I Create a exe file were a tab control on it work`s

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?"
Attachments:
project7.1.jpg ‏129 KB

Make the tab control a control and not an indicator. If you want to write
to it you need to create a local variable.
"Carlos-R." wrote in message
news:[email protected]..
I have a VI with many controls and indicators,these are spread on a
tab control.This tab control works with out any problems but if i
create a exe file then the tab control is fixed. How can I create a
exe file so that the tab control on it work´s ?"

How can I create a exe file with a tab control on it that work´s ?

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?

I have made a new Posting with the same question but this time I added a screenshot of the VI.
Attachments:
project7.1.jpg ‏129 KB

How can i copy the music files from itunes in mp3 format to my PC

How can i copy the music files from itunes in mp3 format to my PC

Dr. P,
Song files are just files. You can copy them the way you copy any other files, like photos or documents.
If any of the files are not already in MP3 format, and you wish to create MP3 versions, then you can convert them using iTunes, by following this guide: http://support.apple.com/kb/HT1550

When I move a RAW file from IPhoto to my desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file across?

When I move a RAW file from IPhoto on my macbook pro to desktop or Photoshop it changes to a jpeg and reduces in size. How can I get the Raw file to move across?

I create separate folders based on the year and then the actual date of when I take images. You can make those folders anywhere on any hard drive that is connected to your Mac whether internal or external. I also use the Photoshop Photo Downloader that is included with Photoshop/Bridge and it will create the date folder so all I do is create a Year folder.
Open Bridge or click on the Bridge icon in PS and in the File menu item in Bridge select "Get photos from Camera". It can be a camera connected to your Mac or a memory card from a camera. A window will open and you then select the camera or memory card. Set the location they will be downloaded to, just the folder and you can Browse to a folder that you created, then in the "Create Subfolders drop down select what date stamp you want to use or or custom name or not to create subfolders at all.
I've never cared for iPhoto one bit. I tried it but found it way to restrictive. It likes to have full control over how you interact with your images.

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
A.:
1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
3. Click on "Next" to continue.
4. Click on "Advanced".
5. Click on "Create an ISO file for the recovery disc".
6. Select the destination where you want to create the ISO files. (Default is the D: drive)
7. The program will now create the ISO files. This process may take up to 20 minutes.
8. Click on "Finish". Make sure the box is unchecked.
9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
11. After burn is complete, click on "Close".
12. Double-click the recovery_dvd2 file.
13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

How can i get the trace file

Hi,
I wanted to check the trace file to make sure that there is no login attempts happend through the forms with wrong username and password.
how can i enable the trace file , where i have to write the commands and where i can see the trace file.
I'm using oracle forms 6i
could anybody help me.
thanks
Bcj

This link is all about forms 9i, i'm working on forms 6i. but i have tried with following values
TRACE_LEVEL_CLIENT=16
TRACE_UNIQUE_CLIENT=TRUE
TRACE_FILE_CLIENT=Test
TRACE_DIRECTORY_CLIENT=c:\orant\net80\trace
in sqlnet.ora file and it created a trace file whenever it connected to database through the on_logon trigger.
if the username or password is invalid then the validations raise the form_trigger_failure exception. so there was no trace file. so i was unable to get the trace file to see the invalid login attempts.
Thanks

How can i create a pdf file from Indesing, whit out loosing resolution...

How can i create a pdf file from Indesing, whit out loosing resolution...
in linked images (bitmap) idon´t know where or how can i keep the same resolution "image" that is from the original file ......

In the export settings there is a panel called Compression. You can set downsampling and compression, or lack thereof, there.

How can I create a jar file

Hello!
How can a create a jar file?
I want to run an application just clicking in a icon.
How can I do this?
Thanks a lot.
K�tia.

Get to the command prompt
change directories to the directory where the main class resides.
Open your text editor and type the following in it:
Manifest-Version: 1.0
Main-Class: NameOfMainClass //Just name without ".class"!!!
Created-By: Your Name Here
Save this file as whatever you want to name it with ".mf" as the extension.
Then go back into the command prompt and type the following:
jar cfm "NameOfJarFile".jar "NameOfManifestFile".mf *.class
(without the quote marks of course)
Hit "Enter"
This will jar it up and make it executable.
If you have any images associated with the program you can add them in the same way as above. Just add *.gif or *.jpg after the *.class portion.
Good luck!
LEEMAX I. T.

How can we create the DBC file?

Similar Messages

Maybe you are looking for