How can we get Empty screen as a output list

Hi Experts,
when executing the program I want to display an empty screen (as a output list) instead of error message . How we can do? let me know.
Thanks in advance.
Silviya T

Hi Thomas,
Is u have such a requirement either u can use a sucess message i.e. type s with no text.
REPORT ZSAC_TEST1 message-id 00.
message s000.
Or try using this
write:/ 120 '.' .
the o/p screen looks like blank.
Hope this helps U.
Regards
Sachin Dhingra

Similar Messages

How can I get the screen to lock on my iPhone 4, so I don't press buttons while talking?

I just upgraded to the iPhone 4. When I am talking on the phone, the screen doesn't lock, so I am constantly pressing buttons or hanging up on the person I'm talking to. How can I get the screen to lock while I'm talking? It's driving me NUTS.

The otterbox is one of the culprits. Take the phone out of the case and see if it still happens. If so it is not the case. If the problem goes away, then you may need to make the hole slightly larger. My family has three iPhone 4's in otterboxes and none have this problem. Other users on this forum have reported success with the above methods.

I was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

i was updating software and suddenly my IPHONE started asking for I tunes on mobile screen , how can i get by screen back or How i can restore without loosing data , I m more worried about data , Please help in resolutio

What exactly are you seeing on the phone's screen ? If the iTunes icon and cable then the phone is in recovery mode, in which case it's too late to take a new backup or to copy any content off the phone - you will have to connect the phone to your computer's iTunes and reset it back to factory defaults, after which you can restore to the last backup that you took or just resync your content to it

HT5219 my thunderbolt shows the sleep screen instead of the MacBook Air screen How can I get my screen to show up on the Thunderbolt?

I cannot see my MacBook Air screen on the Thunderbolt display. All it shows is a screen saver. How can I get simultaneous screens to show on the Thunderbolt?

I think changing the symbols from movieclips to graphics helped, thank you.

How can i get the Icons in the output of ALV?

Hi,
I am trying to get the Icons in my report output using ALVs.
i am adding the following line
 line_fieldcat-icon = 'ICON_GREEN_LIGHT'. in my field catalog for getting the respective Icon in the list. but the Icon is not getting displayed?
May i know whether the above specified line is correct or not? if not, how can i get the Icons in my output using ALVs?
Thanks and regards,
Ramesh.

Hi,
take idea from this code :
INCLUDE ICONs.
WRITE : / icon_green_light AS ICON.
WRITE : / icon_red_light AS ICON.
write : / icon_yellow_light AS ICON.
OR
add code as per steps below in your ALV report :
FIRST :
INCLUDE ICONs.
Second : in your internal table add :
icon type icon-id,
Third :
add this value in icon field for green light.
itab-icon = '@08@'.
append itab.
Fourth : display
is_fieldcat-tabname = 'IT_FINAL'.
is_fieldcat-fieldname = 'ICON'.
is_fieldcat-col_pos = '1'.
is_fieldcat-outputlen = '12'.
is_fieldcat-seltext_l = 'ICON'.
APPEND is_fieldcat TO it_fieldcat.
CLEAR is_fieldcat.
Reward points, if helpful,
Sandeep Kaushik
Message was edited by:
 Sandeep Kaushik
null

How can I get the name of a output module template

Hey guys,
     SDK newbie here.
     How can I get the name of every output module template?
     Thanks
Zhiqiang Li

Ok. Bravo
Please mark this as 'Answered' - it will help others on the forum -

How can I get full screen to work with utube in google chrome?

When I use utube in google chrome I can not get full screen to work. How can I fix this?

See: http://forums.adobe.com/thread/1193685
also: http://helpx.adobe.com/flash-player/kb/enable-system-flash-player-google-chrome.html

TS2771 how can i get my screen replaced?

I recently dropped my ipod touch and shattered the screen. The touch screen still works, its just cracked all throughout the screen. How can i get it fixed and how much would it cost?

Check repair options in link below.
Troubleshooting 101
Some topics covered
-Basic troubleshooting steps
-Hard reset instructions
-Manual restore instructions
-Hardware troubleshooting
-Preventive Maintenance
-Anti-theft & recovery tips
-Battery-saving tips
-Repair options
-Contacting Apple
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

How can I get a screen saver to show on my screen? It shows when I do a test only.

How do I get my screen saver to work? I did everything in Help. It will show for a test but not after that.

karenfromtonawanda wrote:
How do I get my screen saver to work? I did everything in Help. It will show for a test but not after that.
Including
For more information about the options, click the Help button (looks like a question mark).

I inadvertantly hit "Forget this device" on the blue tooth setting. How can I get this device back on the list?

I inadvertantly hit "Forget this Device" on the bluetooth setting. How can I get the "deleted" device back on the list to connect to?

Re-pair the devices and you should be good.

How can I get Safari to keep the reading list pane open all the time?

I am really enjoying the Reading List pane in Safari. How can I get Safari to make it default that the reading pane is always open on every tab or window I open? I'm running Lion 10.7.3.
Thanks.

Hi Necris Rex,
If you are having trouble keeping the leading zeros even after first formatting the cells as text and then importing the csv values (perhaps you are importing the csv via File > Open into a new document) then you can restore the leading zeros without much trouble:
Insert a new column next to the column where the leading zeros have not imported as you want. Here I assume the original values are in column B and your new column is C.
Put this formula in column C: =RIGHT("00000000"&A,6) , and fill down the column.
Select column C, command-c to copy, and, with the column still selected, Edit > Paste and Match Styles.
Delete the original column that has the missing leading zeros.
Replace the 6 in the formula with the number of digits you need, so the formula knows how many zeros to "pad."
The above assumes you actually need the leading zeros back. If you just want to display things nicely in your Numbers table, then formatting as Numeral System and setting Places to 6 (or whatever) is quick and easy, no formulas required.
SG

How can i get matte screen protected and cleaned ???

I know that glossy MBP has a piece of glass covered on the screen, and it's easy to clean it by using some soft material. However, for matte screen. how can I protect screen and clean it. Like at the edge of screen, if dust in it, I won't be able to clean it. Any ideas?

Trade it in for a glossy? Hee hee.
I use canned air to clean my screen sometimes, because most of what I have is dust on the display. Rarely do I get fingerprints (believe it or not) on the glossy screen. Saves from any abrasion by wiping it off with a dry cloth (the special kind, for like, cleaning eyeglasses, or one designed for LCD displays-- yes, I know the new MBPs have LED displays).
I used iKlear way back when, and oh, it is atrocious. Left residue on the screen that I couldn't get off with another clean wipe, and then even water wouldn't do it, so I had no choice but to pull out the Windex (not a good substance to be cleaning an LCD display with) to get it all off. So from my personal experience, stay away from the iKlear. Bad stuff.
I recommend canned air (for dust), and the cloth wipes (for grease and fingerprints). Use a damp cloth with water for any stuck on dirt.
ONCE IN AWHILE, it is "okay" to use some type of window cleaner (yes, I know everyone here will throw rocks at me) because water can never get out all that gunk in the long run. Once a month, I use it on those tough spots.
Honestly, with my glossy display, it is easy to clean and keep clean. The previous stuff I mentioned was based on my PowerBooks which were all matte screens, of course.

How can I get selection screen values from outside of program?

Hi. all.
Now. I'm developing moritoring systems and I have problems. for getting selection screen values in runtime. Is there any function, methods or structure to know this?
I'd like to get selection screen values while several programs working in runtime and update these values to table to show current system's status and input values for users in real time.
For example.
Now. 3 PGMs are working on systems.
each PGM is ZAAA01, ZAAA02, ZAAA03.
and ZAAA01 needs input parameter P01, ZAAA02 needs input parameter P02, ZAAA03 needs input parameter P03.
In this case, I have to know values of P01, P02 and P03.
The mornitoring systems will show current working status of PGMs(ZAAA01~03)' and these PGMs' input values.
As fas as I know, the structure 'SCREEN' can be used in each PGM for runtime. Is there any SAP system structure or something else for this purpose?
I hope your hopeful repsponse.
Thanks.

Umm..I need to explain more about this.
of course I know SET, GET PARAMETERS.
But I'd like to minimize coding for each PGM level.
I have over hundreds PGMs and I have to develop the PGM(including tables and structures) that mornitor
all of those PGMs on a report in real-time.
This PGM is kind of Process Manager.
First I should know dialogue job PGM and background job that pass parameters using SAP(ABAP) Memory.
And then I have to update those PGMs' input values via screens into tables in real-time.
So, I couldn't use SET,GET PARAMETERS for this PGM.
I want to know methods that can be used for getting information about runtime PGMs' selection screen field values in SAP systems wide.
Please help me some one knows this.

How can I get the screen to return to normal size after magnifying?

I've had my phone for a week and just encountered a problem I can't get out of. My nephew inadvertently held the phone with 3 fingers on the screen, now the screen is magnified and I can't get it back to normal. I've tried resetting the phone and the applie Icon came back, then my screen - normal size; but as soon as I touched the screen to put in my passcode the magnification came back on and the screen seems to 1) go in the opposite direction than I'm scrolling, when it moves at all and 2) I can't get it to go back to normal size - help

If you have trouble turning Zoom off from your iPod, connect the iPod to iTunes, click the Summary tab, and click the "Configure Universal Access..." button. Select neither under the "Seeing" section and click "OK".

How: can i get a specificated item from a list with more than 100.000 items

Hi,
i have a very large list and i got always an exception that the list has more than 5000 items and cant query!! But in the default list view i can see, order and filter all items. So how can i do this by c#?

Hi,
According to your description, my understanding is that you want to get a specific list item form a list which with more than 100000 items using C#.
I suggest you can use CAML Query with some condition and set Row Limit to specify the number of items to return.
Here is a detailed code demo for your reference:
Client Object Model Access Large Lists/Overcome ListView Threshold while accessing large list
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How can we get Empty screen as a output list

Similar Messages

Maybe you are looking for