How can we get the web cam to work with sykpe or any out going calls

can get the web cam to work with skype

Hey there,
What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

Can't get the video camera to work with iOS 7

Since I updated to iOS 7 I cannot get the video part of the camera to work. I can't even activate the button.

Swipe up or down to select video option.

How can I get the dictionary feature to work with firefox?

I haven't been able to get the dictionary to pop up using the three-finger double-tap in Firefox. Is there is a fix for this?

Download and install magicPrefs (for free) and do this:
My guess is that there are problems with gestures yet to be worked out. One problem I see is that users don't wait long enough, or try hard enough (ha!) when using them. My guess is that when the machine is busy (indexing, rendering, etc.) that the gestures get hosed, but I am not a developer...so just a guess

How can I get the Firefox browser to work with my high speed internet?

After switching from dial-up to high speed internet, I can no longer open the Firefox browser (which I was using) even after downloading the latest version. It is set for my default, but I can only use IE to browse. What else do I need to do to make it work?

You didn't tell me it was a user name password issue.
Open Keychain Access. (Applications/Utilities)
Select Passwords on the left.
Delete the Delta keychain.
Now from your Safari menu bar click Safari / Preferences then select the Autofill tab. Make sure: User names and passwords is selected.
Navigate to the Delta site. Login with your user name and password. You should be prompted to save that info to a new keychain.

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room

How can you get the apple tv to work in a hotel where to get on the wifi you have to still go to a website first and put in your room?

Welcome to the Apple Community.
Unfortunately the Apple TV doesn't have a web browser so you can't do that.

Answer: to How can I get the reset button to work.

How can I get the reset button to work?: Answer
Thanks to everyone who helped on this. You are awesome. Especially Ned!! Posted here because I was unable to add more to the existing post.
Here is the question:
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/removeChild()
    at AddATree2/onReset()
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
Here is the answer:
//when you click the reset button everything is removed from the stage
    //except the star, baclground, and reset button (trees and greeting REMOVED)
    public function onClear(Event:MouseEvent):void
            if (tree3) removeChild(tree3);
            if (tree2) removeChild(tree2);
            if (webText) removeChild(webText);
            if (tree) removeChild(tree);
            clickCount = 0;

This is the answer to what to put in the onclear function.

How can I get the right click to work in firefox -- it works in internet explorer

how can I get the right click to work in firefox -- it works in interne

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

How can I get the readability bookmarklet to work

Firefox 3.6.8 in Windows XP Home on a Toshiba netbook. How can I get the "readability" bookmarklet to work? It works just fine in Camino on an Apple mini desktop computer running OS X 10.4.11 (Tiger.) Readability uses javascript, which I do have turned on. The problem (of it not working) doesn't seem to have anything to do with the NoScript add-on either, as I tried allowing everything on the page and it still didn't work. Any ideas of what to try next?
''Duplicate post, continue [https://support.mozilla.com/en-US/questions/746624 here]''

Hi there.
By chance, I too have the readability bookmarklet installed (but I don't use it that much, to be honest), and it works ok for me. It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.

How can i get the "Do recursive listing.vi" with teh sub-vi, because my is lost???

How can i get the "Do recursive listing.vi" with the sub-vi, because my is lost???
THX

I think you must be using LV 8.x...
Do a LabVIEW repair to get it back or else, use the attached one.
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
Recursive File List.vi ‏33 KB

How can i get the pressure brush to work in Illustrator CS6?

how can i get the pressure brush to work in Illustrator CS6?

yes i do, a bamboo. and pressure works in photoshop

How can I get the web application's context root?

I have a web application, which is defined in Tomcat's server.xml:
<Context path="/cbes" docBase="e:\work\GM\code\CBESCurrency" debug="0"
reloadable="true" crossContext="false"/>
And I hava a servlet in this web application.
How can I get the context root of the web application?
in this example: reture should be "cbes" or "/cbes"
how?
thanks alot.

getContextPath() in javax.servlet.http.HttpServletRequest

How can I get the "Multi-Camera Record" button to show up in the Multi-Camera editor?

I've used the Multi-Camera editor in Premiere for years but in the most recent update (Adobe Premiere Pro CC 2014) I can't get the Multi-Camera Editor to record my camera switches. I looked for the Multi-Camera Record button but it wasn't where it used to be, and even when hitting the plus sign to add more buttons it does not appear in that menu either.
What am I missing here? Please help. Thank you.

Did you try it in the program monitor?

How can i get the length of a string with Simplified Chinese?

when i use eventwriter to add content to a xmldocument,there are some chinese simplified string in it,i use String.length() for the length ,but it is not correct~how can i get the right length for eventwriter?

Below is a simple patch for this problem. Using this patch you need to pass 0 as the length argument for any XmlEventWriter interfaces that take a string length.
Regards,
George
diff -c dbxml-2.3.10/dbxml/src/dbxml/nodeStore/NsEventWriter.cpp dbxml-2.3.10.patch/dbxml/src/dbxml/nodeStore/NsEventWriter.cpp
*** dbxml-2.3.10/dbxml/src/dbxml/nodeStore/NsEventWriter.cpp    Fri Nov 3 12:26:11 2006
--- dbxml-2.3.10.patch/dbxml/src/dbxml/nodeStore/NsEventWriter.cpp      Thu Mar 15 13:58:13 2007
*** 234,239 ****
--- 234,241 ----
        CHECK_NULL(text);
        CHECK_SUCCESS();
+       if (!length)
+               length = ::strlen((const char *)text);
        if (!_current)
                throwBadWrite("writeText: requires writeStartDocument");
        try {
*** 413,418 ****
--- 415,422 ----
        CHECK_NULL(dtd);
        CHECK_SUCCESS();
+       if (!length)
+               length = ::strlen((const char *)dtd);
        if (_current) {
                if (!_current->isDoc())
                        throwBadWrite("writeDTD: must occur before content");
diff -c dbxml-2.3.10/dbxml/src/dbxml/nodeStore/NsWriter.cpp dbxml-2.3.10.patch/dbxml/src/dbxml/nodeStore/NsWriter.cpp
*** dbxml-2.3.10/dbxml/src/dbxml/nodeStore/NsWriter.cpp Tue Jan 2 16:01:14 2007
--- dbxml-2.3.10.patch/dbxml/src/dbxml/nodeStore/NsWriter.cpp   Thu Mar 15 13:59:25 2007
*** 326,331 ****
--- 326,333 ----
                needsEscape = false;
        else
                needsEscape = true;
+       if (!length)
+               length = ::strlen((const char *)chars);
        writeTextWithEscape(type, chars, length, needsEscape);
*** 336,341 ****
--- 338,345 ----
                              bool needsEscape)
        if(_entCount == 0) {
+               if (!len)
+                       len = ::strlen((const char *)chars);
                if ((type == XmlEventReader::Characters) ||
                    (type == XmlEventReader::Whitespace)) {
                        char *buf = 0;
*** 381,386 ****
--- 385,392 ----
NsWriter::writeDTD(const unsigned char *data, int len)
        if(_entCount == 0) {
+               if (!len)
+                       len = ::strlen((const char *)data);
                _stream->write(data, len);
}

How can we get the web cam to work with sykpe or any out going calls

Similar Messages

Maybe you are looking for