How can we know AR invoice is opended or closed?

Hi All,
I have a invoices(Receivables) data in 11.5.5. Now i would like to migrate open invoice or partially paid invoice to R12. How can we know that invoices(Receivables) is opened or closed.
Suggestions will be highly appreciated.
Thanks.
Edited by: user627525 on Feb 24, 2009 11:13 PM

Can't an invoice have more than 1 payment schedule id?
Yes, an invoice can have more than 1 Payment schedule ID
If so, would they all have to be zero or closed?
We have to check by Payment schedule ID
Regards,
Sridhar

Similar Messages

How can I get the invoice for the suscription

How can i get the invoice for the PDF exporter suscription, I need it, thank you

Hi Aurelie,
Firstly, you might need to sign in at "adobe.com" using your Adobe ID credentials.
After you are signed in, click on your name in the navigation bar and then click 'Manage Account'.
Under 'Plan & Products section', choose 'Manage Plan'.
All your plan details, payments, billing history are listed on this page.
To print the invoice, click on 'Print' button next to the invoice. A PDF copy of the invoice will be displayed in the next tab and this is it.
Now check and let me know if you need further assistance.
Regards,
Anubha

How can I know which model of K9A2VM I have?

I have a K9A2VM motherboard with an Athlon 64 x2 3600+ AM2 CPU. I would now like to upgrade to an AM3 Phenom II CPU with lots and lots of cores.
However, I have a problem. I don't know if I have K9A2VM-FD or K9A2VM-FIH and I don't know how to find out. I've opened my box and looked at the card, but it only says K9A2VM. By reading the specs and looking at pictures, I know it has to be one of them, or at least that it is not K9A2VM-F V2 since it only has two RAM slots and I have four of them installed. There are other obvious differences too, which I can easily spot by looking at the picture.
Now, looking at the CPU support page for -FD and -FIH, they seem to have differences in what CPUs they support:
-FD at least supports an X6: http://www.msi.com/product/mb/K9A2VM-FD.html#/?div=CPUSupport
Phenom II X6 Thuban HDT90ZFBK6DGR 1090T 200 3.20 3M 6M E0 125 7501v1B.zip
But the -FIH CPU support page is different: http://www.msi.com/product/mb/K9A2VM-FIH.html#/?div=CPUSupport
If I can use that processor, I'm really happy. But -FIH doesn't seem to support Phenom II at all. So provided that the information in the CPU support page is correct, it's fairly important to me to know which model I have. But in case nobody knows how I can distinguish between them; if I buy a Phenom II X6 CPU and it turns out that my motherboard doesn't support it; what is the worst thing that can happen? Will I break the CPU or motherboard, or will it simply not work, but the hardware will still be fine?
Thanks.

So this is a MS-7501 Version 1.0 card, in addition to being a K9A2VM. The entire web refers to it as "K9A2VM-FD / FHI". One will work, and the other will go up in smoke. And there is no easy way to know which is which. So how can I know? The reason I bought this card was so I could upgrade the CPU at a later time. Now it seems that's not possible, because the available information is so very poor. I've never had to gamble when purchasing hardware from other vendors. Is this common for MSI?

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal, How can i know whether my phone is in use??

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget. How can i know whether my phone is in use??

You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can I know that the listener is starting up?

Hi,
I follow the instruction in ACS Oracle Installation guide. I believe that many of you use the document to install oracle. I have a question when I try to start the listener. when I execute ./listener8i stop or ./listener8i start I got the same message, which is different from the message in the ACS document.
Here is the message:
Oracle 8i listener start/stop
Startting the Listener for 8i:
LSNRCTL for Linux: Version 8.1.6.0.0 - Production on 31-AUG-2000 14:00:00
(c) Copyright 1998, 1999, Oracle Corporation. All rights reserved.
TNS-01106: Listener using listener name LISTNENER has already been startd.
Is the message above correct? How can I know the listener is started up?
TIA,
Tony

try "lsnrctl status" on the linux command line.
for further info use "lsnrctl help"

How can i know if my ipad 3 is original, how can i know if my ipad 3 is original

Hi there.. I bought an IPAD 3 from my friend. How can i know if the IPAD is original?

Check warranty
https://selfsolve.apple.com/agreementWarrantyDynamic.do

How can i know who get my photos and messages from my icloud???

How can i know who get my photos and messages from my icloud???

Nobody, except the persons who have your username and password or with whom you share photos streams would be able to see anything from you.

How can i know who get my photos and messages from my icloud???, How can i know who get my photos and messages from my icloud???

How can i know who get my photos and messages from my icloud???

The following website gives you an overview on how your iCloud data is encrypted: https://support.apple.com/kb/HT4865 So as long as you don not share your Apple ID with someone else, everything should be fine.

How can I get an invoice for money taken from my card?

How can I get an invoice for the money taken from my card???

Hi
You can login to https://www.adobe.com/account/account-orders.html and print your invoice.
Thanks
-sarabjit

How can we know the affected reports when i remove object from universe

Hi All,
If i remove any objects from the universe.
How can i know the list of affected reports.

Thanks for your update.
It shows what are all the reports has been created by using that particular universe.
But my question was, if i remove any object from the universe, Then what are all the reports affected(We may not use that deleted object in all the reports)

How can we know the return code of BDC Program ?

Hi All,
Please tell me : How can we know the return code of BDC Program when being exceuted in Session or in Transaction mode.
In my program, we are uploading data from Excel sheet to SAP via BDC
The records that are not updated we want to create a log file.
Now to know whether a record is updated ot not, wat syst field shloud be used?
Its urgent....
<b>Reward Point will be there ....</b>
Thanks,
Harish

Hi harish,
try the logic in this code ...
i had attached input file in the end.
TYPES: begin of errmess,
        msgnr type t100-msgnr,
        text type t100-text,
       end of errmess.
TABLES : t100.
DATA: BEGIN OF DD_VA01,
       AUART TYPE VBAK-AUART,
       KUNNR TYPE RV45A-KUNNR,
       BSTKD TYPE VBKD-BSTKD,
       MABNR TYPE RV45A-MABNR,
       KWMENG(2) type C,
       KBETR(2) type C,
      END OF DD_VA01.
DATA:IT_VA01     Like TABLE OF DD_VA01,
     WA_VA01     Like LINE OF IT_VA01,
     WA_VA01_F   Like LINE OF IT_VA01,
     IT_BDCDATA TYPE TABLE OF BDCDATA,
     WA_BDCDATA Like Line OF IT_BDCDATA,
     W_FNAME     TYPE STRING,
     messtab like bdcmsgcoll occurs 0 with header line,
     it_errmess type table of errmess,
     wa_errmess like line of it_errmess,
     err_message type string.
data: zf1 type i,
      zc1 type c value '2',
      fn(20) type c.
Main Code ************************************************************
PERFORM get_input using 'C:\Documents and Settings\ic881592\Desktop\Daran_bdc_VA01-e.txt'.
SORT IT_VA01 BY AUART KUNNR BSTKD.
LOOP AT IT_VA01 INTO WA_VA01.
if WA_VA01_F-AUART <> WA_VA01-AUART OR
     WA_VA01_F-KUNNR <> WA_VA01-KUNNR OR
     WA_VA01_F-BSTKD <> WA_VA01-BSTKD.
       PERFORM set_header_flag.
       PERFORM create_bdc_header_data.
endif.
PERFORM create_bdc_item_data.
ENDLOOP.
PERFORM call_transaction.
PERFORM errorlog.
Procedures ***********************************************************
form get_input using w_fname.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME            = W_FNAME
      HAS_FIELD_SEPARATOR = '#'
    TABLES
      DATA_TAB            = IT_VA01.
endform.
form call_transaction.
    PERFORM bdc_field       using 'BDC_OKCODE' '/11'.
    CALL TRANSACTION 'VA01' USING IT_BDCDATA MODE 'A' messages into messtab.
    refresh it_bdcdata.
endform.
FORM set_header_flag.
       WA_VA01_F-AUART = WA_VA01-AUART.
       WA_VA01_F-KUNNR = WA_VA01-KUNNR.
       WA_VA01_F-BSTKD = WA_VA01-BSTKD.
       if zf1 = 1.
           PERFORM call_transaction.
       endif.
       zf1 = 1.
endform.   "set_header_flag.
form create_bdc_header_data.
     perform bdc_dynpro      using 'SAPMV45A' '0101'.
     perform bdc_field       using 'VBAK-AUART' WA_VA01-AUART.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     perform bdc_field       using 'KUAGV-KUNNR' WA_VA01-KUNNR.
     perform bdc_field       using 'VBKD-BSTKD' WA_VA01-BSTKD.
     perform bdc_field       using 'BDC_OKCODE' '/00'.
     perform bdc_dynpro      using 'SAPMSSY0' '0120'.
     perform bdc_field       using 'BDC_CURSOR' '04/06'.
     perform bdc_field       using 'BDC_OKCODE' '=CHOO'.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
endform. "create_bdcdata
FORM create_bdc_item_data.
     CONCATENATE 'RV45A-KWMENG(' zc1 ')' INTO FN.
     perform bdc_field       using 'BDC_CURSOR' FN.
     perform bdc_field       using FN WA_VA01-KWMENG.
     CONCATENATE 'KOMV-KBETR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-KBETR.
     CONCATENATE 'RV45A-MABNR(' zc1 ')' INTO FN.
     perform bdc_field       using FN WA_VA01-MABNR.
     perform bdc_dynpro      using 'SAPMV45A' '4001'.
     PERFORM bdc_field       USING 'BDC_OKCODE' '=POAN'.
ENDFORM.
form errorlog.
LOOP AT MESSTAB .
    if MESSTAB-MSGNR = '311' or MESSTAB-MSGTYP = 'E'.
        SELECT SINGLE msgnr text FROM T100
                        into wa_errmess
                        WHERE SPRSL = MESSTAB-MSGSPRA
                          AND ARBGB = MESSTAB-MSGID
                          AND MSGNR = MESSTAB-MSGNR.
        IF SY-SUBRC = 0.
          err_message = wa_errmess-TEXT.
          IF err_message CS '&1'.
            REPLACE '&1' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&2' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&3' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&4' WITH MESSTAB-MSGV4 INTO err_message.
          ELSE.
            REPLACE '&' WITH MESSTAB-MSGV1 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV2 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV3 INTO err_message.
            REPLACE '&' WITH MESSTAB-MSGV4 INTO err_message.
          ENDIF.
          CONDENSE err_message.
          WRITE: / MESSTAB-MSGTYP, err_message .
        ELSE.
          WRITE: / MESSTAB.
        ENDIF.
    endif.
ENDLOOP.
endform. "errorlog
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
WA_BDCDATA-PROGRAM = PROGRAM.
WA_BDCDATA-DYNPRO   = DYNPRO.
WA_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
WA_BDCDATA-FNAM = FNAM.
WA_BDCDATA-FVAL = FVAL.
APPEND WA_BDCDATA TO IT_BDCDATA.
CLEAR WA_BDCDATA.
ENDFORM.
input file :
OR     2148     0001235     R-1162     8     17
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     6     25
OR     2148     0001235     R-1162     4     12
OR     2148     0001236     R-1162     3     12
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     1     25
OR     2148     0001236     R-1162     7     12
OR     2148     0001236     R-1161     8     30
OR     2148     0001236     100-400     10     25
OR     2148     0001235     R-1161     5     30
OR     2148     0001235     100-400     2     25
OR     2148     0001235     R-11621     3     12
OR     2148     0001235     R-1161     2     30
OR     2148     0001235     100-400     1     25
OR     2148     0001235     R-1162     7     12
OR     2148     0001235     R-1161     8     30
OR     2148     0001235     100-400     10     25
OR     2148     0001236     R-1162     8     17
OR     2148     0001236     R-1161     2     30
OR     2148     0001236     100-400     6     25
OR     2148     0001236     R-1162     4     12
OR     2148     0001236     R-1161     5     30
OR     2148     0001236     100-400     2     25

How can I know if malicious spyware or malware has been downloaded to my iphone 4?

How can I know if malicious spyware or malware has been downloaded to my iPhone 4? And if so, how do I remove it?

If your device has not been jailbroken, there can't be viruses or malware on the phone.

How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

How can we know AR invoice is opended or closed?

Similar Messages

Maybe you are looking for