How can we know if an entity is active or not in a given period in HFM??

In in the ownship management, we can see the child entity is inactive, but we don't know when it was inactivced, is there any table we can find to see if an entity is active or not??

Hi,
The best way that comes to mind is to make a grid where you have the entity and value dimensions on the rows and years and periods on the columns.
For entities you select the parent and the child you want to look at, value dimension members <Entity Currency> and [Proportion]. For years you select those which you want to look at and all the periods.
On the grid the [Proportion] should turn from green to red on one of the year/periods and that's the moment your entity became inactive to that parent.
Hope this helps.

Similar Messages

How can i know if the GPS is active or not ?

Hi all ,, I would like to know more about the GPS in my New Iphone 3G . how do i activate the GPS or decativate it ? also i have a little question which is i cant download any free apps from itunes store ..i choosed to none pay this ditnt continue the steps and if i entered my visa number it keeps telling me wrong number

iphone GPS blue indicator. I find it interesting - and would be interested if anyone has any input on this - on the UK site the GPS info for iphone says this -
Get the signal.
"In addition to A-GPS, iPhone features location technology unlike anything available on a mobile phone today. iPhone uses signals from GPS satellites, Wi-Fi hot spots and mobile towers to get the most accurate location fast. So if you’re inside — without a clear line of sight to a GPS satellite — iPhone finds you via Wi-Fi. And if you’re not in range of a Wi-Fi hot spot, iPhone finds you using mobile phone towers. On the iPhone display, the size of the circle around a location pin tells you how accurately iPhone is able to calculate a location: The smaller the circle, the more accurate the location."
On the US site it says this ------ Where has the blue GPS indicator got to?!! Compare the second lines in each paragraph. I can't see what they mean - can you?
Get the signal.
In addition to A-GPS, iPhone 3G uses signals from GPS satellites, Wi-Fi hot spots, and cellular towers to get the most accurate location fast. If GPS is available, iPhone displays a blue GPS indicator. But if you’re inside — without a clear line of sight to a GPS satellite — iPhone finds you via Wi-Fi. If you’re not in range of a Wi-Fi hot spot, iPhone finds you using cellular towers. And the size of a location circle tells you how accurately iPhone is able to calculate that location: The smaller the circle, the more accurate the location.

HT4061 How can I know that my iPad is original or not?

How can I know that my iPad is original or not? If I can know, how?

Do you think it's a fake iPad?
Were you able to register it with no problems?
https://supportprofile.apple.com/MySupportProfile.do
Where did you buy it? Can you compare it with iPads at an Apple store or reseller?

HT201328 how can I know whether my IME is blocked or not?

How can I know whether my IME is blocked or not?

Ask your wireless carrier.
Where did you acquire this iPhone? Common scam
is to sell iPhone in working condition so buyer can see
it works, then seller reports iPhone as stolen/lost for
insurance claim. Insurance company works with
cellular provider to blacklist the iPhone and suddenly
it no longer works.
Or is your iPhone still locked to a wireless carrier as
you imply in https://discussions.apple.com/thread/5001327?tstart=0

In Generic Extraction how can we know whether it is Delta Enabled or not?

In Generic Extraction how can we know whether it is Delta Enabled or not?
Thanks,
Pramod.

Hi Pramod,
In R/3 use RSO2 tcode and enter your DS name and click "Change / Display" In this "Press F7 or Display Filed List" icon near to Generic Delta.In this Screen if Delta Update is Checked means it supports delta method otherwise it won't support delta method.
Note:Assign Points if it helps.
-Arun.M.D

How can we know that the Rule is Generated or Not?

Hi,,
After creating the Risk , its suggested to click on Generate Rules Button to Generate the Risk.
But my question is that how we can know whether the risk is already generated or not..??
Any table or any change history for this.
As I can see even after generating the Rule the last update date for the risk is still the same.
Someone please help me !

Hi,
Rule ID numbers are just identifiers for different combinations in same risk. It is just serial number assigned to the combination.
Example:
Risk: RISK01
Function: FUNC01                         Function: FUNC02
Action:      ZU01                              Action:     XU01
                 ZU02                                              XU02
Rule ID: 0001 for ZU01 and XU01
Rule ID: 0002 for ZU01 and XU02
Rule ID: 0003 for ZU02 and XU01
Rule ID: 0004 for ZU02 and XU02
But if you remove action ZU02 and XU01 in your update
Remaining
Action:
ZU01
Action:
XU02
Rule ID: 0001 for ZU01 and XU02
So it will just update the respective risk with same rule id assignment to new combination.
To achieve more clarity try to build one risk in you system.
You can definitely go into the risk to see if the new rule generated has changes reflected as per update or not. Try this all with example so you would have clarity.
BR,
Mangesh

[IDCS2] How can I know a font whether is existing or not

Now,I met a problem as follows:
1.When we open a document which contains missing font,the dialog comes.
2.When I apply a Japanese font on Japanese charactor [あ],it has no problems,but when I change it as Arial font,it becomes missing font.
In these two cases,the reasons why the font is missing are different,
So I want to know how to judge them (The font is really not existing and the font face is not existing in the current font)?
Before I judge it by CID==0,but it seems wrong on Mac;
And I think the judgement is different on Mac and Win,
who knows it,tell me please
Thank you in advanced!

Aren't these two unrelated problems? They do get marked with the same color (ghastly pink), but in case #1 you don't have the font at all, and in case #2 you have a missing character in an existing font and what you see is the font's default character. A missing character has nothing to do with "font face".

How can i know in PO change is happen or not

Hi All ,
i have one requirement in existing Purchase order user is mad some change like he change the QTY value 10 to 20. so i want to know which field change are happened. and is there any routine is updated flag like X .
Please Help me .
Thanks,
Venkat.

Detail of changes are in CDPOS, CDHDR is only header, you could (should) use FM of groups SCD1, SCD2 and SCD6 to extract change details. (Ref Change Documents, Procedure, … , Read and Edit Change Documents
Regards,
Raymond

How can we know AR invoice is opended or closed?

Hi All,
I have a invoices(Receivables) data in 11.5.5. Now i would like to migrate open invoice or partially paid invoice to R12. How can we know that invoices(Receivables) is opened or closed.
Suggestions will be highly appreciated.
Thanks.
Edited by: user627525 on Feb 24, 2009 11:13 PM

Can't an invoice have more than 1 payment schedule id?
Yes, an invoice can have more than 1 Payment schedule ID
If so, would they all have to be zero or closed?
We have to check by Payment schedule ID
Regards,
Sridhar

How can I know which model of K9A2VM I have?

I have a K9A2VM motherboard with an Athlon 64 x2 3600+ AM2 CPU. I would now like to upgrade to an AM3 Phenom II CPU with lots and lots of cores.
However, I have a problem. I don't know if I have K9A2VM-FD or K9A2VM-FIH and I don't know how to find out. I've opened my box and looked at the card, but it only says K9A2VM. By reading the specs and looking at pictures, I know it has to be one of them, or at least that it is not K9A2VM-F V2 since it only has two RAM slots and I have four of them installed. There are other obvious differences too, which I can easily spot by looking at the picture.
Now, looking at the CPU support page for -FD and -FIH, they seem to have differences in what CPUs they support:
-FD at least supports an X6: http://www.msi.com/product/mb/K9A2VM-FD.html#/?div=CPUSupport
Phenom II X6 Thuban HDT90ZFBK6DGR 1090T 200 3.20 3M 6M E0 125 7501v1B.zip
But the -FIH CPU support page is different: http://www.msi.com/product/mb/K9A2VM-FIH.html#/?div=CPUSupport
If I can use that processor, I'm really happy. But -FIH doesn't seem to support Phenom II at all. So provided that the information in the CPU support page is correct, it's fairly important to me to know which model I have. But in case nobody knows how I can distinguish between them; if I buy a Phenom II X6 CPU and it turns out that my motherboard doesn't support it; what is the worst thing that can happen? Will I break the CPU or motherboard, or will it simply not work, but the hardware will still be fine?
Thanks.

So this is a MS-7501 Version 1.0 card, in addition to being a K9A2VM. The entire web refers to it as "K9A2VM-FD / FHI". One will work, and the other will go up in smoke. And there is no easy way to know which is which. So how can I know? The reason I bought this card was so I could upgrade the CPU at a later time. Now it seems that's not possible, because the available information is so very poor. I've never had to gamble when purchasing hardware from other vendors. Is this common for MSI?

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal, How can i know whether my phone is in use??

Hi anybody there who can help me ha..? My phone 5s was stolen 1 month ago..Find my phone is no a big deal bcz it seems to be wiped out all data including settings. it might be in use somewhere turning new fresh Gadget. How can i know whether my phone is in use??

You would know for a fact if the device is in use, but if you go back to the find my iPhone app in iCloud.com, you can either select to erase it, or place it in lost mode, in which case, once the device makes a connection to the internet, it will automatically go into that mode.

How can i know the RPM of my HD?

I guys...
Simple question...
How can i know the RPM of my HD?
I have a Mac mini and i would like to know that.
Any ideas?.
Thanks so much!!!

Hi!!
It doesn't show...
Vendor:          NVidia
Product:          MCP79 AHCI
Link Speed:          3 Gigabit
Negotiated Link Speed:          1.5 Gigabit
Description:          AHCI Version 1.20 Supported
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
FUJITSU MHZ2120BH G1:
Capacity:          120.03 GB (120,034,123,776 bytes)
Model:          FUJITSU MHZ2120BH G1
Revision:          00810009
Serial Number:                  K64PT9427599
Native Command Queuing:          Yes
Queue Depth:          32
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Medium Type:          Rotational
Bay Name:          Lower
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
Macintosh HD:
Capacity:          119.69 GB (119,690,149,888 bytes)
Available:          21.38 GB (21,376,569,344 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /
Those are the 2 texts...
Any idea?
Thanks!!

How can i Know the email linked to icloud

Please can anyone help me how to know teh email linked to my phone ??
it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
so please how can i know the linked email to my phone
Thank you

Welcome to the Apple community jorjh.
If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
This article provides more information about Activation Lock.

How can I know that the listener is starting up?

Hi,
I follow the instruction in ACS Oracle Installation guide. I believe that many of you use the document to install oracle. I have a question when I try to start the listener. when I execute ./listener8i stop or ./listener8i start I got the same message, which is different from the message in the ACS document.
Here is the message:
Oracle 8i listener start/stop
Startting the Listener for 8i:
LSNRCTL for Linux: Version 8.1.6.0.0 - Production on 31-AUG-2000 14:00:00
(c) Copyright 1998, 1999, Oracle Corporation. All rights reserved.
TNS-01106: Listener using listener name LISTNENER has already been startd.
Is the message above correct? How can I know the listener is started up?
TIA,
Tony

try "lsnrctl status" on the linux command line.
for further info use "lsnrctl help"

How can i know if my ipad 3 is original, how can i know if my ipad 3 is original

Hi there.. I bought an IPAD 3 from my friend. How can i know if the IPAD is original?

Check warranty
https://selfsolve.apple.com/agreementWarrantyDynamic.do

How can we know if an entity is active or not in a given period in HFM??

Similar Messages

Maybe you are looking for