)How can we schedule the info package daily run at 6 AM, with out useing in

Hi
   Can any one explain 1) what is information broadcasting &how can we use this.
2)What are the settings we have to do when we use the charts in WAD's
3)How can we schedule the info package daily run at 6 AM, with out useing in process chains
Thanks
Bharath

Hi,
  Information broadcaster :
      you can precalculate and distribute(thru mail) the query, workbook and webtemplate through online link or html file to the receipents (users).
have a look at the below link.
     http://help.sap.com/saphelp_nw04/helpdata/en/3a/0e044017355c0ce10000000a1550b0/frameset.htm
Infopackage scheduling:
     you can schedule the infopackage daily at your desired time .In the schedule tab ,select the start later in background and in the scheduling option give the date and time and give the period values as daily.
Regards,
Siva.

Similar Messages

  • I had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives

    i had a power mac g4 into which i put 3, 320 gb PATA hard drives in a raid slice config so that it worked as one drive needless to sat that i lost the g4 to a surge but the drives are good. now i have an imac, how can i recover the info off those drives. can i put the drives in external cases and plug them all in, will the imac see them as a raid slice then  help please

    Before you have another accident:
    Buy a UPS of good quality and sufficient to your needs.
    I would have to assume that the drives were connected to a PCI PATA card, hopefully. Otherwise, well RAID and having drives on the same bus (master and slave).
    And no backup, none at all...
    Get your hands on a G4.
    Data Rescue 3 from Prosoft maybe.
    If they were SATA and running on PCI SATA controller, very popular and common really in G4s, more options would be open.

  • My computer crashed and I no longer have the itunes library. i get an error msg that my iphone is synced to another library - how can I get the info from the phone to the itunes library?

    my computer crashed and I no longer have the itunes library. i get an error msg that my iphone 3g is synced to another library - how can I get the info from the phone to the itunes library without losing everything? How do I delete old audiobooks from my iphone?

    You can transfer itunes purchases:  File>Devices>Transfer Purchases
    The iphone is not a storage/backup device.  The sync is one way - computer to iphone.  The exception is itunes purchases.
    It has always been very basic to always maintain a backup copy of your computer.  Use your backup copy to put everything back.

  • How can I remove the repetitive multiple daily updates from Mozilla

    Hello
    How can I remove the repetitive multiple daily updates from Mozilla?
    Within a day, each day I get prompts as: Mozilla Firefox Update is ready to install at your computer.........then I do install and update it.......then after few minutes again it asks to update the same edition.........again after logging in back few hours later it prompts me again with the same request........IT IS VERY ANNOYING!
    Thank You,
    Gene

    ''the-edmeister [[#answer-683804|said]]''
    <blockquote>
    You could allow the update to proceed - that will stop Mozilla from asking if you want to update every time you launch Firefox, as is supposed to happen.
    Any particular reason that you don't want Firefox 35.0.1 to be installed?
    </blockquote>
    Hi The EDmeister,
    Thank you for your response.
    Nevertheless, I have to repeat that I have ALREADY INSTALLED the Firefox 35.0.1 in my computer and ALLOWED IT TO PROCEED.
    The same edition is prompting me back again, and again and again, within a day, each day. I get that annoying message at the top-right hand.
    I do not want to see it every time, multiple times a day, that is the issue here, unresolved!
    Best regards,
    Gene

  • How can I extract the info from my Time Capsule?

    How can I extract the info from my Time Capsule?

    What info would that be??
    If you mean how to recover TM back to a computer.. see Pondini Q14-17
    http://pondini.org/TM/FAQ.html
    If that isn't it .. we do not know what.. "the info" you are talking about.

  • HT1296 I am trying to sync contacts from my iPhone to Mac.  When I plug in my iPhone, I do not get the Info tab in iTunes (as mentioned in how to sync on this website).  How can I get the info tab to appear?

    I am trying to sync contacts from my iPhone to Mac.  When I plug in my iPhone, I do not get the Info tab in iTunes (as mentioned in how to sync on this website).  How can I get the info tab to appear?

    Since the release of Mavericks (OS X 10.9) syncing contacts and calendars with a Mac via iTunes is no longer supported. The currently supported method is via iCloud. Setup instructions: http://www.apple.com/icloud/setup/

  • How can i get the info off of an old appleworks database. to my mountain lion. OS X?

    how can i get the info off of an old appleworks database. to my new mountain lion. OS X? My old data base is on AppleWorks 6

    1.  Read Roger Wilmut's excellent series of articles Abandoning Appleworks, especially the one on databases.
    2.  Call the Apple Store and order Snow Leopard Server for $19.99 + sales tax & shipping: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only).
    3.  Install Snow Leopard Server into Parallels 8, now available for a short time (4 more days) in the March 2013 MacUpdate 10 App Bundle for $49.99:
    4. Install Appleworks 6.2.9 into Snow Leopard Server and it will now run concurrently with Mt. Lion:
                                  [click on image to enlarge]

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • How can i export the data to excel which has 2 tables with same number of columns & column names?

    Hi everyone, again landed up with a problem.
    After trying a lot to do it myself, finally decided to post here..
    I have created a form in form builder 6i, in which on clicking a button the data gets exported to excel sheet.
    It is working fine with a single table. The problem now is that i am unable to do the same with 2 tables.
    Because both the tables have same number of columns & column names.
    Below are 2 tables with column names:
    Table-1 (MONTHLY_PART_1)
    Table-2 (MONTHLY_PART_2)
    SL_NO
    SL_NO
    COMP
    COMP
    DUE_DATE
    DUE_DATE
    U-1
    U-1
    U-2
    U-2
    U-4
    U-4
    U-20
    U-20
    U-25
    U-25
    Since both the tables have same column names, I'm getting the following error :
    Error 402 at line 103, column 4
      alias required in SELECT list of cursor to avoid duplicate column names.
    So How can i export the data to excel which has 2 tables with same number of columns & column names?
    Should i paste the code? Should i post this query in 'SQL and PL/SQL' Forum?
    Help me with this please.
    Thank You.

    You'll have to *alias* your columns, not prefix it with the table names:
    $[[email protected]_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id, b.id, a.val1, b.val1, a.val2, b.val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
      for rData in cData loop
    ERROR at line 18:
    ORA-06550: line 18, column 3:
    PLS-00402: alias required in SELECT list of cursor to avoid duplicate column names
    ORA-06550: line 18, column 3:
    PL/SQL: Statement ignored
    $[[email protected]_impl] r
      1  declare
      2    cursor cData is
      3      with data as (
      4        select 1 id, 'test1' val1, 'a' val2 from dual
      5        union all
      6        select 1 id, '1test' val1, 'b' val2 from dual
      7        union all
      8        select 2 id, 'test2' val1, 'a' val2 from dual
      9        union all
    10        select 2 id, '2test' val1, 'b' val2 from dual
    11      )
    12      select a.id a_id, b.id b_id, a.val1 a_val1, b.val1 b_val1, a.val2 a_val2, b.val2 b_val2
    13      from data a, data b
    14      where a.id = b.id
    15      and a.val2 = 'a'
    16      and b.val2 = 'b';
    17  begin
    18    for rData in cData loop
    19      null;
    20    end loop;
    21* end;
    PL/SQL procedure successfully completed.
    cheers

  • How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

    If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
    The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
    plications has shown that a good manual is your best friend.
    Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
    Jeremy

  • How can I disable the "faces" recognition feature in iPhoto.  I don't use it and find it very annoying.  Thank you.

    how can I disable the "faces" recognition feature in iPhoto.  I don't use it and find it very annoying.  Thank you.

    I am afraid you will just have to ignore it.

  • I have a macbook pro the early 2007 version. How can i download The mac app store and will i be able to use the iLife'11?

    I have a macbook pro the early 2007 version & i am new to the mac apple world. How can i download The mac app store and will i be able to use the iLife'11? I want to buy the iLife software but I am not sure if it will work on my computer.

    Hi Kristy,
    Update to 10.6.8 to use the app store.
    Your MBP's hardware requirements should be fine for iLife 11:
    http://support.apple.com/kb/HT4163

  • How can I get a display of all running programs in lion like I used to get when I did a 4 finger swipe in snow leopard?

    how can I get a display of all running programs in lion like I used to get when I did a 4 finger swipe in snow leopard?
    I liked to turn off running programs without a window that I was no longer using
    thanks.
    Best I can do now is to open the "force quit" window and click on programs I want to stop and then send each one a "command-Q" and then repeat as necessary
    Jeff

    Command + Tab is what you are after i think

  • I have a itouch and i just got a new computer so how do i put the songs on my itouch on my computer with out deleting them

    i have a itouch and just got a new computer so how do i put the songs on my itouch on my computer with out deleting them

    How do you have your Shuffle set up to sync music? 
    B-rock

Maybe you are looking for

  • My built-in speaker no longer works on iPhone 4

    it is less than a month old and i have an Otter cover for it. When i took the cover off after this happened a few days ago the sound came back through the speaker. Now it no loger works whether the cover is on or off.

  • How to connect to a remote database in a lan??

    Hey guys......! I need to connect to a remote msaccess database in a lan and import its data into my mysql database.I know how to connect to a msaccess database using ODBC.But I don't know how to connect to a remote database without creating dsn in t

  • Add or remove applications from Startup in LION

    We just did a migration from Tiger to Lion for our primary Mac user and now, on her new machine running Lion, Microsoft Excel and Microsoft Entourage launch every time she starts up her PC.  Microsoft Excel was not even in her Startup on her old syst

  • How do I rewrap text in a quoted message?

    Is it my imagination, or did there used to be a command in one of the menus to rewrap paragraphs? I am drafting an email this morning with an extended quote and it has those terrible ragged edges you get with oft forwarded excerpts. Do I need to manu

  • Cannot open attachments in earthlink webmail

    I can't open any of my attachments when using my earthlink webmail in firefox. I have used it now for a couple of years with no problem. I can still open them in internet explorer so its something with firefox. What can I do?