How can we use business object (e.g. crystal report ) in webdynpro abap

Hi All,
We all know that business object has been part of sap products.
But even though in SAP, I really don't know much about business object.
and how can we use the great function of BO and integrate into our development to make
user have much better function and user experience.
Do we have some learning material of BO?
Could someone share some material here?
Thanks and Regards
Aaron.

One of the main ways that you can integrate some Business Objects content with WDA is via FlashIslands. If you are on 7.01 or higher, you have the option to use FlashIslands UI element. There are many tutorials on FlashIslands available on SDN. FlashIslands work well with Xcelsius content, since the output of Xcelsius is a Flex component. It is pretty easy to set the Xcelsius interface to External Connection and then write a wrapper Flex Component around the generated output, so that it can be used in the FlashIslands interface.
For Crystal Reports integration you will need NetWeaver 7.02 (comming early next year). We have integrated Crystal Reports as an output option in the Web Dynpro ABAP ALV and the Classic Dynpro ALV. You don't need to do any development to enable this. You can use two different SAP delivered Crystal Reports templates for the ALV output, or create and add your own templates.
Some of ther BOBJ integration is still in prototype and demo phase within SAP. For instance we have a data interface to send data to Explorer onDemand from any ABAP application. We have a prototype FlashIsland for WebI to run in place within Web Dynpro ABAP. Over future enhancement packages you will see increased integration opportunties with the BOBJ capabilites.

Similar Messages

How can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.

how can we use TABLE CONTROL in BDC and WORK FLOW of ABAP.?
please explain the important questions.

How to deal with table control / step loop in BDC
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen, our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now with the help of Poonam on sapfans.com developement forum, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number;
(the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample,
the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop. Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
              LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
          or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data:    FixedLine type i, " number of fixed line on a certain screen
                LoopLine type i, " the number of lines occupied by one steploop item
                FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new                                                               " scrolling screen is empty, otherwise is 1
                Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
                pageno    type i, " you need to scroll screen how many times.
                line      type i, " number of lines appears on the screen.
                index(2) type N, " the screen index for certain item
                begin     type i, " from parameter of loop
                end       type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
                   LoopLine type i (see step 1)
                   FirstLine type i (see step 2)
                   DataLine type i ( this is the item number you will enter in transaction)
          changing pageno    type i (return the number of page, depends on run-time visible                                                                             line in table control/ Step Loop)
          changing line      type i.(visible lines one the screen)
data: midd type i,
      vline type i, "visible lines
if DataLine eq 0.
   Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
        pageno = DataLine div vline.
        if pageno eq 0.
           pageno = pageno + 1.
        endif.
elseif FirstLine eq 1.
        pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
        midd = ( DataLine - 1 ) mod ( vline - 1).
        if midd = 0 and DataLine gt 1.
                pageno = pageno - 1.
        endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
                    FirstLine type i(see step 2)
                    LineIndex type i(item index)
          changing Index type n.    (index on the screen)
if FirstLine = 0.
        index = LineIndex mod Line.
        if index = '00'.
                index = Line.
        endif.
elseif FirstLine = 1.
        index = LineIndex mod ( Line - 1 ).
        if ( index between 1 and 0 ) and LineIndex gt 1.
                index = index + Line - 1.
        endif.
        if Line = 2.
                index = index + Line - 1.
        endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
                    DataLine type i
                    FirstLine type i
                    loopindex like sy-index
        changing    begin type i
                    end type i.
If FirstLine = 0.
   if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
   elseif loopindex gt 1.
        begin = Line * ( loopindex - 1 ) + 1.
        end   = Line * loopindex.
        if end gt DataLine.
           end = DataLine.
        endif.
   endif.
elseif FirstLine = 1.
if loopindex = 1.
        begin = 1.
        if DataLine <= Line.
                end = DataLine.
        else.
                end = Line.
        endif.
elseif loop index gt 1.
        begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
        end =   ( Line - 1 ) * ( loopindex - 1 ) + Line.
        if end gt DataLine.
                end = DataLine.
        endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index in steploop/Table Control
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
      name2(14) value 'EKPO-MENGE(XX)',
      name3(15) value 'RM06E-SELKZ(XX)'.
assign:         name1 to <material>,
                name2 to <quan>,
                name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
        perform calrange using Line DataLine FirstLine sy-index
                         changing begin end.
loop at DataTable from begin to end.
        perform calindex using Line FirstLine DataTable-LineIndex changing Index.
        name1+11(2) = Index.
        name2+11(2) = Index.
        name3+12(2) = Index.
        perform bdcfield using <material> DataTable-matnr.
        perform bdcfield using <quan>     DataTable-menge.
        perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
An example abap program of handling Table Control during bdc programming.
REPORT zmm_bdcp_purchaseorderkb02
       NO STANDARD PAGE HEADING LINE-SIZE 255.
                Declaring internal tables                            *
*-----Declaring line structure
DATA : BEGIN OF it_dummy OCCURS 0,
         dummy(255) TYPE c,
       END OF it_dummy.
*-----Internal table for line items
DATA : BEGIN OF it_idata OCCURS 0,
          ematn(18),      "Material Number.
          menge(13),      "Qyantity.
          netpr(11),      "Net Price.
          werks(4),       "Plant.
          ebelp(5),       "Item Number.
        END OF it_idata.
*-----Deep structure for header data and line items
DATA : BEGIN OF it_me21 OCCURS 0,
           lifnr(10),      "Vendor A/c No.
           bsart(4),       "A/c Type.
           bedat(8),       "Date of creation of PO.
           ekorg(4),       "Purchasing Organisation.
           ekgrp(3),       "Purchasing Group.
           x_data LIKE TABLE OF it_idata,
         END OF it_me21.
DATA : x_idata LIKE LINE OF it_idata.
DATA : v_delimit VALUE ','.
DATA : v_indx(3) TYPE n.
DATA : v_fnam(30) TYPE c.
DATA : v_count TYPE n.
DATA : v_ne TYPE i.
DATA : v_ns TYPE i.
*include bdcrecx1.
INCLUDE zmm_incl_purchaseorderkb01.
                Search help for file                                 *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
START-OF-SELECTION.
       To upload the data into line structure                        *
CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
      filename = p_file
      filetype = 'DAT'
    TABLES
      data_tab = it_dummy.
    Processing the data from line structure to internal tables       *
REFRESH:it_me21.
CLEAR :it_me21.
LOOP AT it_dummy.
    IF it_dummy-dummy+0(01) = 'H'.
      v_indx = v_indx + 1.
      CLEAR   it_idata.
      REFRESH it_idata.
      CLEAR   it_me21-x_data.
      REFRESH it_me21-x_data.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_me21-lifnr
                                       it_me21-bsart
                                       it_me21-bedat
                                       it_me21-ekorg
                                       it_me21-ekgrp.
      APPEND it_me21.
    ELSEIF it_dummy-dummy+0(01) = 'L'.
      SHIFT it_dummy.
      SPLIT it_dummy AT v_delimit INTO it_idata-ematn
                                       it_idata-menge
                                       it_idata-netpr
                                       it_idata-werks
                                       it_idata-ebelp.
      APPEND it_idata TO it_me21-x_data.
      MODIFY it_me21 INDEX v_indx.
    ENDIF.
ENDLOOP.
                To open the group                                    *
PERFORM open_group.
        To populate the bdcdata table for header data                *
LOOP AT it_me21.
    v_count = v_count + 1.
    REFRESH it_bdcdata.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0100',
                                    ' ' 'BDC_CURSOR' 'EKKO-LIFNR',
                                    ' ' 'BDC_OKCODE' '/00',
                                    ' ' 'EKKO-LIFNR' it_me21-lifnr,
                                    ' ' 'RM06E-BSART' it_me21-bsart,
                                    ' ' 'RM06E-BEDAT' it_me21-bedat,
                                    ' ' 'EKKO-EKORG' it_me21-ekorg,
                                    ' ' 'EKKO-EKGRP' it_me21-ekgrp,
                                    ' ' 'RM06E-LPEIN' 'T'.
    PERFORM subr_bdc_table USING:   'X' 'SAPMM06E'    '0120',
                                    ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                    ' ' 'BDC_OKCODE' '/00'.
    MOVE 1 TO v_indx.
*-----To populate the bdcdata table for line item data
    LOOP AT it_me21-x_data INTO x_idata.
      CONCATENATE 'EKPO-EMATN(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-ematn.
      CONCATENATE 'EKPO-MENGE(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-menge.
      CONCATENATE 'EKPO-NETPR(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-netpr.
      CONCATENATE 'EKPO-WERKS(' v_indx ')' INTO v_fnam.
      PERFORM subr_bdc_table USING ' ' v_fnam x_idata-werks.
      v_indx = v_indx + 1.
      PERFORM subr_bdc_table USING: 'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '/00'.
    ENDLOOP.
    PERFORM subr_bdc_table USING:    'X' 'SAPMM06E'    '0120',
                                     ' ' 'BDC_CURSOR' 'RM06E-EBELP',
                                     ' ' 'BDC_OKCODE' '=BU'.
    PERFORM bdc_transaction USING 'ME21'.
ENDLOOP.
PERFORM close_group.
                  End of selection event                             *
END-OF-SELECTION.
IF session NE 'X'.
*-----To display the successful records
    WRITE :/10 text-001.          "Sucess records
    WRITE :/10 SY-ULINE(20).
    SKIP.
    IF it_sucess IS INITIAL.
      WRITE :/ text-002.
    ELSE.
      WRITE :/   text-008,          "Total number of Succesful records
              35 v_ns.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_sucess.
      WRITE:/4 it_sucess-lifnr,
             17 it_sucess-tabix CENTERED,
             30 it_sucess-sucess_rec.
    ENDLOOP.
    SKIP.
*-----To display the erroneous records
    WRITE:/10   text-006.          "Error Records
    WRITE:/10   SY-ULINE(17).
    SKIP.
    IF it_error IS INITIAL.
      WRITE:/   text-007.          "No error records
    ELSE.
      WRITE:/   text-009,          "Total number of erroneous records
             35 v_ne.
      SKIP.
      WRITE:/   text-003,          "Vendor Number
             17 text-004,          "Record number
             30 text-005.          "Message
    ENDIF.
    LOOP AT it_error.
      WRITE:/4 it_error-lifnr,
             17 it_error-tabix CENTERED,
             30 it_error-error_rec.
    ENDLOOP.
    REFRESH it_sucess.
    REFRESH it_error.
ENDIF.
CODE IN INCLUDE.
Include           ZMM_INCL_PURCHASEORDERKB01
DATA:   it_BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
DATA:   it_MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA:   E_GROUP_OPENED.
*-----Internal table to store sucess records
DATA:BEGIN OF it_sucess OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       sucess_rec(125),
     END OF it_sucess.
DATA: g_mess(125) type c.
*-----Internal table to store error records
DATA:BEGIN OF it_error OCCURS 0,
       msgtyp(1)   TYPE c,
       lifnr LIKE ekko-lifnr,
       tabix LIKE sy-tabix,
       error_rec(125),
     END OF it_error.
       Selection screen
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS session RADIOBUTTON GROUP ctu. "create session
SELECTION-SCREEN COMMENT 3(20) text-s07 FOR FIELD session.
SELECTION-SCREEN POSITION 45.
PARAMETERS ctu RADIOBUTTON GROUP ctu.     "call transaction
SELECTION-SCREEN COMMENT 48(20) text-s08 FOR FIELD ctu.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s01 FOR FIELD group.
SELECTION-SCREEN POSITION 25.
PARAMETERS group(12).                      "group name of session
SELECTION-SCREEN COMMENT 48(20) text-s05 FOR FIELD ctumode.
SELECTION-SCREEN POSITION 70.
PARAMETERS ctumode LIKE ctu_params-dismode DEFAULT 'N'.
"A: show all dynpros
"E: show dynpro on error only
"N: do not display dynpro
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 48(20) text-s06 FOR FIELD cupdate.
SELECTION-SCREEN POSITION 70.
PARAMETERS cupdate LIKE ctu_params-updmode DEFAULT 'L'.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 3(20) text-s03 FOR FIELD keep.
SELECTION-SCREEN POSITION 25.
PARAMETERS: keep AS CHECKBOX.       "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN COMMENT 48(20) text-s09 FOR FIELD e_group.
SELECTION-SCREEN POSITION 70.
PARAMETERS e_group(12).             "group name of error-session
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 51(17) text-s03 FOR FIELD e_keep.
SELECTION-SCREEN POSITION 70.
PARAMETERS: e_keep AS CHECKBOX.     "' ' = delete session if finished
"'X' = keep   session if finished
SELECTION-SCREEN END OF LINE.
PARAMETERS:p_file LIKE rlgrap-filename.
at selection screen                                                *
AT SELECTION-SCREEN.
group and user must be filled for create session
IF SESSION = 'X' AND
     GROUP = SPACE. "OR USER = SPACE.
    MESSAGE E613(MS).
ENDIF.
create batchinput session                                          *
FORM OPEN_GROUP.
IF SESSION = 'X'.
    SKIP.
    WRITE: /(20) 'Create group'(I01), GROUP.
    SKIP.
*----open batchinput group
    CALL FUNCTION 'BDC_OPEN_GROUP'
      EXPORTING
        CLIENT = SY-MANDT
        GROUP = GROUP
        USER   = sy-uname.
    WRITE:/(30) 'BDC_OPEN_GROUP'(I02),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ENDIF.
ENDFORM.                    "OPEN_GROUP
end batchinput session                                             *
FORM CLOSE_GROUP.
IF SESSION = 'X'.
*------close batchinput group
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    WRITE: /(30) 'BDC_CLOSE_GROUP'(I04),
            (12) 'returncode:'(I05),
                 SY-SUBRC.
ELSE.
    IF E_GROUP_OPENED = 'X'.
      CALL FUNCTION 'BDC_CLOSE_GROUP'.
      WRITE: /.
      WRITE: /(30) 'Fehlermappe wurde erzeugt'(I06).
    ENDIF.
ENDIF.
ENDFORM.                    "CLOSE_GROUP
       Start new transaction according to parameters                 *
FORM BDC_TRANSACTION USING TCODE TYPE ANY.
DATA: L_SUBRC LIKE SY-SUBRC.
*------batch input session
IF SESSION = 'X'.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
    WRITE: / 'BDC_INSERT'(I03),
             TCODE,
             'returncode:'(I05),
             SY-SUBRC,
             'RECORD:',
             SY-INDEX.
ELSE.
    REFRESH it_MESSTAB.
    CALL TRANSACTION TCODE USING it_BDCDATA
                     MODE   CTUMODE
                     UPDATE CUPDATE
                     MESSAGES INTO it_MESSTAB.
    L_SUBRC = SY-SUBRC.
    WRITE: / 'CALL_TRANSACTION',
             TCODE,
             'returncode:'(I05),
             L_SUBRC,
             'RECORD:',
             SY-INDEX.
ENDIF.
Message handling for Call Transaction                              *
perform subr_mess_hand using g_mess.
*-----Erzeugen fehlermappe
IF L_SUBRC <> 0 AND E_GROUP <> SPACE.
    IF E_GROUP_OPENED = ' '.
      CALL FUNCTION 'BDC_OPEN_GROUP'
        EXPORTING
          CLIENT = SY-MANDT
          GROUP = E_GROUP
          USER   = sy-uname
          KEEP   = E_KEEP.
      E_GROUP_OPENED = 'X'.
    ENDIF.
    CALL FUNCTION 'BDC_INSERT'
      EXPORTING
        TCODE     = TCODE
      TABLES
        DYNPROTAB = it_BDCDATA.
ENDIF.
REFRESH it_BDCDATA.
ENDFORM.                    "BDC_TRANSACTION
     Form subr_bdc_table                                            *
      text
     -->P_0220   text                                                *
     -->P_0221   text                                                *
     -->P_0222   text                                                *
FORM subr_bdc_table USING      VALUE(P_0220) TYPE ANY
                                VALUE(P_0221) TYPE ANY
                                VALUE(P_0222) TYPE ANY.
CLEAR it_bdcdata.
IF P_0220 = ' '.
    CLEAR it_bdcdata.
    it_bdcdata-fnam     = P_0221.
    it_bdcdata-fval     = P_0222.
    APPEND it_bdcdata.
ELSE.
    it_bdcdata-dynbegin = P_0220.
    it_bdcdata-program = P_0221.
    it_bdcdata-dynpro   = P_0222.
    APPEND it_bdcdata.
ENDIF.
ENDFORM.                    " subr_bdc_table
     Form subr_mess_hand                                            *
      text                                                           *
     -->P_G_MESS text                                               *
FORM subr_mess_hand USING P_G_MESS TYPE ANY.
LOOP AT IT_MESSTAB.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        ID     = it_messtab-msgid
        LANG   = it_messtab-msgspra
        NO     = it_messtab-msgnr
        v1     = it_messtab-msgv1
        v2     = it_messtab-msgv2
      IMPORTING
        MSG    = P_G_MESS
      EXCEPTIONS
        OTHERS = 0.
    CASE it_messtab-msgtyp.
      when 'E'.
        it_error-error_rec   = P_G_MESS.
        it_error-lifnr       = it_me21-lifnr.
        it_error-tabix       = v_count.
        APPEND IT_ERROR.
      when 'S'.
        it_sucess-sucess_rec = P_G_MESS.
        it_sucess-lifnr      = it_me21-lifnr.
        it_sucess-tabix      = v_count.
        APPEND IT_SUCESS.
    endcase.
ENDLOOP.
Describe table it_sucess lines v_ns.
Describe table it_error lines v_ne.
ENDFORM.                    " subr_mess_hand
Also refer
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/bdc-table-control-668404
and
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Regards,
srinivas
<b>*reward for useful answers*</b>

How can we use the same package in our report used by some other report

how can we use the same package in our report used by some other report

Hi,
You just need to assign package while saving your report.
No extra is required providing you are aware of package to be used.

How can i use two list screens in Classical report.

Dear Sir,
In My Report in First screen i am taking the GR details and Display In it_final By Check Box Wise.
Based On The Check Box selection in First screen In Second Screen i want The Challan Details Based On Some In Puts In First Field.
so how can I call The second Screen In Classial report Plz Help Me.

check this report
REPORT ZNNR_ALVOOPS_SCREEN.
tables: mara,spfli.
types: begin of ty_tab,
        matnr type mara-matnr,
        ernam type mara-ernam,
        ersda type mara-ersda,
       end of ty_tab.
DATA ITAB1 TYPE TABLE OF SPFLI.
DATA WA1 LIKE LINE OF ITAB1.
DATA IO1 TYPE SPFLI-CARRID VALUE 'AA'.
data itab type table of ty_tab.
data wa like line of itab.
DATA OK_CODE TYPE SY-UCOMM.
DATA: GRID TYPE REF TO CL_GUI_ALV_GRID,
      CONT TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: GRID1 TYPE REF TO CL_GUI_ALV_GRID,
      CONTA TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
CREATE OBJECT CONT EXPORTING CONTAINER_NAME = 'CONT1' .
CREATE OBJECT GRID EXPORTING I_PARENT = CONT .
CREATE OBJECT CONTA EXPORTING CONTAINER_NAME = 'CONT2' .
CREATE OBJECT GRID1 EXPORTING I_PARENT = CONTA .
selection-screen begin of block b1 with frame title text-100.
select-options: s_matnr for mara-matnr.
selection-screen end of block b1.
select matnr ernam ersda from mara into corresponding fields of table itab up to 15 rows
where matnr in s_matnr .
call selection-screen 100.
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
if ok_code = 'PB1'.
leave to screen 0.
else.
leave to screen 100.
endif.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SELECT * FROM SPFLI INTO
CORRESPONDING FIELDS OF TABLE ITAB1 WHERE CARRID = IO1.
CALL METHOD grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
   I_BUFFER_ACTIVE               =
   I_BYPASSING_BUFFER            =
   I_CONSISTENCY_CHECK           =
    I_STRUCTURE_NAME              = 'MARA'
   IS_VARIANT                    =
   I_SAVE                        =
   I_DEFAULT                     = 'X'
   IS_LAYOUT                     =
   IS_PRINT                      =
   IT_SPECIAL_GROUPS             =
   IT_TOOLBAR_EXCLUDING          =
   IT_HYPERLINK                  =
   IT_ALV_GRAPHICS               =
   IT_EXCEPT_QINFO               =
   IR_SALV_ADAPTER               =
CHANGING
    IT_OUTTAB                     = itab.
   IT_FIELDCATALOG               =
   IT_SORT                       =
   IT_FILTER                     =
EXCEPTIONS
   INVALID_PARAMETER_COMBINATION = 1
   PROGRAM_ERROR                 = 2
   TOO_MANY_LINES                = 3
   others                        = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_STRUCTURE_NAME = 'SPFLI'
    CHANGING
      IT_OUTTAB        = ITAB1.
ENDMODULE.                 " STATUS_0100 OUTPUT

How to add OLE wordpad objects to a crystal report through VB program

Can we programmatically add OLE wordpad objects to a crystal report XI r 2. through VB.NET or VB6?
And is there a way of treating a database binary/blob field as an ole object in CR?

Hi Mohan,
Try it in the Designer first. If it works in the designer then it will work in our SDK's but you'll have to use RAS. So when you post your question to the .NET Development - Crystal Reports Forum be sure to specify what version you are using and anything else as far as versions go.
It may be easier to simply link the OLE Object in the designer, check the help file out on how to.
Thank you
Don

Business Objects Edge and Crystal reports integration.

I'm new to the SAP BO application and I would like to know how to allow users to create and publish Crystal Reports via the Business Objects applicaiton. Currently I have published some reports and the users are able to View then via the InfoViewer Web interface. Now I have a request to allow the users to create their own Crystal reports and publish them. The problem is that the users are not part of my companies network but we have a VPN connection that they user to login to the InfoViewer Web front end to view the reports I have published.

Hi Ed,
what for a Database do you mean ? The Repository Database or the Database with your productive Data for Designing the Reports?
1.
When they enter their username and password in InfoView the Application Server (Tomcat) does it.
2.
Via their ODBC connection. Or when you use Oracle via the native client.
Regards
-Seb.

How can I use hyperion objects inside ASP?

I want to access Essbase by hyperion objects with using in ASP.is it possible? if it is possible,how can I do this? I'll be glad if you help me...Thanks...

Not that I am aware of.. Besides, the data server control is single threaded and would not be a good candidate for web apps..As a research project internally, we created an ASP demo that uses web services to talk to Essbase Deployment Services (Java API).. Let me know if you are interested in seeing that demo and I will give you the URL and a username/password..TimTim TowApplied OLAP, Inc

How to monitor Print Spool folder in Business Objects XI R2 - Crystal report

Hi Guru's
We recently had a issue where disc space was full in BO server and it was down. The reason was there was one job in print spool folder which was eating up whole space in C drive.
We had to stop the print spool service and delete the jobs and restart it back.
In order to prevent this from happening what can be done??.
One way that my client suggested is to write a script where in it will send us the size of print spool folder every hour so we can find the report which is causing this. I have no idea how this can be done.
This happened once and I dont have an answer when my manager asks will it happen again. Is there a way where we can monitor this or stop this from happening.
My current environment is
BOXI R2 , crystal report XI is the reporting tool.
Thanks.

Normally you should run your CR reports in the INfoView. You can start a report either by double clicking on it or by selecting View in the context menu. Still in order to fetch data you have to press the Refresh button in the CR viewer window (in the InfoView).
In the CMC I assume that you are using the Run now option in the context menu. Please note that this will just schedule your report immediatelly. hen the report is scheduled a new instance is created hich is available in the History of the report. In order to see a report in the CMC select again View in the context menu and you can again fetch data by pressing the Refresh button.
Regards,
Stratos

Business Objects Enterprise vs Crystal Reports Server for Central Reporting

A question for all the Architects and Administrators out thereu2026
I have a vision of centrally managing operational reporting (reporting directly against applications and/or ODS databases). The main reasons:
- Management of Security
- Management of Report Inventory
- More efficient use of server resources and capacity (clustering/sharable)
This will be Crystal Reports only.
Is Business Objects Enterprise a feasible solution for this or is a series of Crystal Reports Servers?
My understanding is that the server version does not cluster or scale and a series of them operates independently from each other. Is there a concern of the over-kill or magnitude of Business Objects Enterprise for just Crystal Reports?
What are everyoneu2019s thoughts?
Thanks Much
Ryan Shaw
Enterprise Architect

Hi Ryan,
It really depends what meets your business needs. If you require to scale and expand your BOE XI environment then BOE is what you'll need. BOE will allow you to have clustered CMS' and have multiple processing servers that reside on remote servers.
If your deployment does not require a lot resource and one server can handle the amount of reporting requests and logons, then CR Server would be the better choice. You are correct, CR Server is not scalable and is a single server install only. You cannot expand or add additional BOE servers on remote servers if you use CR Server.
Regards,
Wallie
Edited by: Wallie Cheng on Aug 23, 2008 12:31 AM
If you want to centralize this, a series of CR Servers will not work as each installation will be its entity.

How can I dynamically center an image in Crystal Reports?

Hi! I'm using Visual Studio 2010, SQL Server 2008 R2 and Crystal Reports 13_0_11.
I have a database full of images type image in SQL Server. Every image has diferent width.
I create a report with Crystal Reports and a Dataset and does everything that I want. But I can't horinzotal align the image, in the property window, the horizontal align option is disable, I don't know why... and I don't know what to do...
Please help me with how can I center the images or how can I enable the option...

Hi Fafa0239,
Since it is related to the Crystal Reports, please post questions related to third-party products in their forums (http://scn.sap.com/thread/3440443).
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PDF Encryption. How can I encrypt a PDF via the Crystal Report's Export?

Hello,
Is there a way to encrypt PDF files created via Crystal Report's export feature? We need to have such PDFs encrypted so that end users cannot copy information from them (files would be read only).
I have researched in these Forumns and the old Business Objects' forums but could not find information on the topic. Crystal Report's online help does not provide any information either.
Any help is greatly appreciated
Lucio Gayosso
[CRYSTOB: CA PLEX/Crystal Reports Interfacing and CR FAQ.|http://www.angelfire.com/nc/gayosso/crystob.html]
[GAYOSSONET|http://www.gayossonet.com]

Jason,
Will do. I did not know about these features, this is the 1st day I am in these forums.
Have a great day,
Lucio Gayosso
[CRYSTOB: CA PLEX/Crystal Reports Interfacing and CR FAQ.|http://www.angelfire.com/nc/gayosso/crystob.html]
[GAYOSSONET|http://www.gayossonet.com]

How can we navigate between two windows of same component in webdynpro ABAP

Hi
how can we navigate between two windows( not views ) of same component in webdynpro ABAP. its an urgent requirement
Thanks in advance.
Regards
Laeeq

Hi Laeeq,
You cannot navigate between windows of one component. You can only call a dialog box showing the contents of a second window, or you can embed the contents of a window of a different component.
Just add all the views you need to the one and only main window of the component.
Ciao, Regina

How can I know what version of my Crystal Reports XI (Release 1 or 2)?

I find the product version no. in the HELP-> About Crystal Reports is 11.0.0.2495.
I don't know it is release 1 or release 2, I want to download the service patch,
which version of service patch should I need to download ?
Derek Yim

Hi Derek,
This is duplicate thread.
You question is answered here:
[How can I know that what version of my Crystal Reports XI ?;
Regards,
Shweta

Difference between Business objects Entprise and crystal report server

hello,
I have to develop reports which will be used by a group of 100 to 150 users and total reports are 7 and each report will be around 100-150 pages each. So i am in the process of evaluvation BOE and CR server.Can any body help me out in this.
Prem
Trying something new

Hello Prem,
The Concurrent Access License is per-user logon to Crystal Report Server or BusinessObjects Enterprise.
Each User logon will increment the CAL. If a User logs on twice, then CAL is increased by two. A CAL will not be released until a User logs off. If the maximum number of CALs have been attained, further logon attempts will be denied.
With a Named User License, you can have a number of active Users up to the number of NUL that you've purchased. The named user can connect multiple times to the system. If you would like to add additional Users beyond the NUL that you have, you either have to purchase further NUL, or disable a User already there.
In either case, the CAL or NUL won't work like the CPL that you have with the JRC - license management is handled by the Enterprise system.
With Licensing for the Server or Enterprise, each user accessing reports must be named within the system.
Sincerely,
Ted Ueda

How can I use Diagnostics Object Model APIs?

Hi.
In the Internet Explorer DevCenter page I could reach a very interesting section about developer APIs. In particular there is a section devoted to the Diagnostics
Object Model API. This is something very cool I think but the problem is that I couldn't find a way to use such APIs.
There are many pages about methods, properties that one can use, but absolutely no page where it is possible to download something or understand how to use these tools. For example consider the DiagnosticsGlobalScope object
used across this API to retrieve references to all methods and other objects for diagnostics: I tried typing it in F12 console, but did not succeeded in getting a reference to a valid object.
How am i supposed to use this API?

Hi,
As the issue is specific with IE development, you may contact Microsoft IE Dev center for further assistance on the issue:
Contact - Internet Explorer Dev Center:
http://social.msdn.microsoft.com/Forums/ie/en-US/home?category=iedevelopment
Please revert for any clarification on this or any Windows issue. We will be glad to help you.
Roger Lu
TechNet Community Support

How can we use business object (e.g. crystal report ) in webdynpro abap

Similar Messages

Maybe you are looking for