How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

Similar Messages

How to write a code for open new txt file in swing

hai all,
now i do one project in java.that project's GUI is Swing. But i don't known swing (basic).So how to write a code for open new txt file and "Open window " in menu item on swing.that means when i click the "New" on menu that time open a new txt file. open also like that type.
plz give me that code ! very urgent
Advance Thanks !
RSK

Swing Tutorial:
http://java.sun.com/docs/books/tutorial/uiswing/index.html
Since you don't know the basic of swing read the tutorial, it is for your own good because it is useless if we provide you with a code you don't even understand and how it works.
If you want a menu read the tutorial about using menus and for opening a file read using JFileChooser.
note: don't use the word urgent because it implies that your problem is more important than others.

How can i write a code to get sume of value from days.

Hi,
how can i write a code to get the sum of value of days(example 1 to 30).
This is in BPS ...
i created multi planning area and creted planning function with {keyfigure name,planning area,days}.
now i want to read all the actual values from basic planing area(basic cube) and calculate the sum of the value.if you have idea can you share the code.
ENTRIES = VARC ( 'zvardays' ).     ex(zvardays like 28 days or 29 days or 30 days or 31 days)
COUNT = ENTRIES.
*Get the all the days value from actual
FOREACH PAREA = 'basic planning area'.
COUNT = 1.
DO
     SUM = SUM + {amount, count}      (amount is a keyfirgure value)
ENDDO.
COUNT = COUNT+1.
   SUMACT = SUM.
ENDFOR.
can you correct the above code ....to read the values and sum of the those value.
Thanks...

Hi ..
That is ok..
Can you provide sample code for my requirement..
and also how can i pass the error message (can you help me syntax )
and if my acutal-total is not equal to plan-total then
i have to pass the error message and then i have to restrict save the data how i can i restrict(user can not save the data until the values should be equal) .
Can you help me it is very urgent..
thanks.//
Edited by: Eyda rose on Jun 4, 2008 9:29 PM

How can I write HTML code in this forums

Sorry but I didn't know where to post this thread.....
How can I write HTML code in this forums?

Hello,
Every piece of code in your post should be wrapped with the forum tags [ code] and [ /code], without the blanks.
In case of the <a> tag, that is not enough. In this case, you have several options. The most elegant one is to use the entity name for the less-then sign - & lt; - without any spaces. Other options is to add a space between the less-then and the ‘a’ character (and make a note of it) or change the less-then character with a left bracket one.
When posting code, you should always use the forum preview option, just to make sure the forum software “understood” your code correctly.
Hope this helps,
Arie.

How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.

What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????

Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either.   I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!!    DW
Original message----
From : [email protected]
Date : 25/01/2015 - 11:53 (GMTST)
To : [email protected]
Subject : How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
    created by susanl96972449 in Photoshop Elements - View the full discussion
Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken. So I am presuming that means it is installed and no further action required?
Here's my problem: I have had no problems getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week. Suddenly when they are imported all I see is the timer icons but they don't open to let me view them. If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair. So anyone out there experienced this and can give me some advice? Please?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

How can i watch native code for hashCode() in Object class?

How can i watch native code for hashCode() in Object class?

Those are two different requirements. You still haven't told us why you want the first one.
The second one is called JNI - Java Native Interface. There is a forum here, and a large amount of documentation, and a book about it.

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available.

How can I resolve error code -54 in iTunes? I am using the latest iTunes. No new updates are available. I'm using iTunes 11.3 on a MacBook Pro, OS X 10.6.8. I can't save my library in iTunes, the message just keeps popping up.

From an OS9 reference, error -54 is a software lock on a file or a permissions error. (Although there is no formal list of OSX error code some of the old codes still apply to OSX .)
First, try simply restarting your computer.
Try quitting iTunes, then deleting the .xml (not .itl !) version of the library file in the iTunes folder (iTunes will generate a new one).
iTunes Library cannot be saved (Error -54) - https://discussions.apple.com/thread/1912814 - various things to try.
Unknown error (-54) while syncing ipod - https://discussions.apple.com/thread/1082953 - problem was locked files
Why does iTunes keep showing a -54 error when I sync my iPad? - https://discussions.apple.com/thread/3727114
Error -54 possibly related to Touch Copy - https://discussions.apple.com/thread/3727114 - cleared by deleting preferences on iPad.
iTunes: Missing folder or incorrect permissions may prevent authorization - http://support.apple.com/kb/ts1277
Troubleshooting permissions issues in Mac OS X - http://support.apple.com/kb/HT2963

Hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)

hi I am attempting to use a Zed R-16 with Logic Pro 9, how can I setup a bounce for output 17-18 this is where the mixer sums (the audio outputs on the zed come through 17-18)
I would like to be able to quickly bounce down my mixes, through the Zed outputs.

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

How can I find my password for iTunes? Forgot it and can't see how to restore or change

How can I find my password for iTunes? Forgot it and can't see how to restore or change it. It is not the same as the apple id password - or so my iPhone iTunes says - Help

I don't want to reset my apple ID password. I know it's right. It doesn't work on Itunes to restore my phone. All the passwords I know are not working. I want to know why.

TS1702 After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?

Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

How can I export to PDF for Offset printing including color and grayscale photo's?

After reading dozens of forum, I still don’t found the answer.
I made a photobook with full-colur and B/W photos for Offset printing. I want the B/W to be in grayscale to avoid color possible color shades. It seems InDesign doesn’t support grayscale, the images become way to dark. Even with exporting without any colour conversion or destination and/or including original colour profiles, the grayscale pictures are being exported to dark to PDF.
How can I export to PDF for Offset printing including color and grayscale photo’s?

Yes, the Photoshop & ID CMYK working spaces are the same
This can get difficult because the 3 programs handle soft proofing differently.
The working spaces don't matter, it's the document profile(s) that manage the preview. So here is the same grayscale image placed in ID on top and PS on the bottom. I've set my Photoshop info to show the doc profile in the lower left corner. I can see my InDesign's Document CMYK profile in my Proof Setup (the Working CMYK is different and isn't being used). Both profiles are effectively the same Coated FOGRA39 (Black Ink FOGRA in the case of PS).
But the previews don't match because I have Overprint turned off, so the InDesign preview is Gamma 2.2 or a "screen" media preview.
If I turn on Overprint preview I get a match because I'm soft proofing for print:

How can I archive photos in iPhoto to a hard drive and retain the Album folders and the Events?

How can I archive photos in iPhoto to a hard drive and retain the Album folders and the Events? I tried to Export the Albums but just transferred the files individually.

If you want to maintain the iPhoto organisation then back up the iPhoto Library.
If you want to export to the Finder, well you need to create a folder for the contents of an Album and expot to that.
If you have an older version of iPhoto: Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events. This feature is built in to iPhoto 11.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How can I export photos from Aperture with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.

How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?

Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby.

How can I select several emails from 3900 on my 5c and delete the rest easily

How can I select several emails from 3900 on my 5c and delete the rest easily

We'll I don't think there's a easy way to delete a lot of emails besides deleting all of them. To delete all of them click on inbox them edit then "mark all" then trash/delete. Other than that you will have to specifically deleted the ones you want to delete.

How can I write a script for set left indent?

In three cases as below:
for example:
left indent:8mm; first indent:0mm
left indent:0mm; first indent:8mm
left indent:8mm; first indent:-8mm
How can I write a script to tell Indesign, wherever the text indent is, each time when I run the script once, the text can put just a step rightward, and “one step = 8mm”.
Please!

Hi, Trevor
I use change by list as below:
grep {leftIndent:48mm} {leftIndent:56mm}
grep {leftIndent:40mm} {leftIndent:48mm}
grep {leftIndent:32mm} {leftIndent:40mm}
grep {leftIndent:24mm} {leftIndent:32mm}
grep {leftIndent:16mm} {leftIndent:24mm}
grep {leftIndent:8mm} {leftIndent:16mm}
grep {firstLineIndent:8mm, leftIndent:48mm} {firstLineIndent:8mm, leftIndent:56mm}
grep {firstLineIndent:8mm, leftIndent:32mm} {firstLineIndent:8mm, leftIndent:48mm}
grep {firstLineIndent:8mm, leftIndent:24mm} {firstLineIndent:8mm, leftIndent:32mm}
grep {firstLineIndent:8mm, leftIndent:16mm} {firstLineIndent:8mm, leftIndent:24mm}
grep {firstLineIndent:8mm, leftIndent:8mm} {firstLineIndent:8mm, leftIndent:16mm}
grep {firstLineIndent:-8mm, leftIndent:48mm} {firstLineIndent:-8mm, leftIndent:56mm}
grep {firstLineIndent:-8mm, leftIndent:32mm} {firstLineIndent:-8mm, leftIndent:48mm}
grep {firstLineIndent:-8mm, leftIndent:24mm} {firstLineIndent:-8mm, leftIndent:32mm}
grep {firstLineIndent:-8mm, leftIndent:16mm} {firstLineIndent:-8mm, leftIndent:24mm}
grep {firstLineIndent:-8mm, leftIndent:8mm} {firstLineIndent:-8mm, leftIndent:16mm}
but not that perfect,
I want to useing jave "if{}" or "for{}" to write this script, but I don't kown the syntext.

How can we write the code for opening the command prompt and closing the

Similar Messages

Maybe you are looking for