How can you see a hidden Datasource?

Using Crystal Reports v.11.0.0.1282 I have written a report, which is running through a C++ program. I recently had to change Datasources, and now, the report will only run on the c++ program if the data is in the old datasource and not the new one. When I look at the datasource location expert, I only see the one I had just changed to. However, when I look at the dependancies I see this problem:
Error Data Source: Verify for table Command failed. Possible report corruption. C:\acclaim\reports\Invoice Support.rpt
Warning Data Source: There are unlinked tables in your report. In some cases this could lead to an excessive quantity of records. C:\acclaim\reports\Invoice Support.rpt
Also when looking at or trying to change the links, I see this error:
More than one datasource or a stored procedure has been used in this report. Please make sure that no SQL Expressoin is added and no server side group-by is performed.
How on earth can I see where the problem is. I believe as the writer of the c++ program does, that it is still referencing the old Database, but I can't see it.
PLEASE HELP!
thanks you in advance!

this is an ODBC connection, but yes I have tried a redo of the connection.
I also can run the same query though my SQL manager, and get the results which I see in my report. There does not really seem to be a problem with my report. The problem seems to be with the program which is using it. The man which had written is, is adamant it is not his program, and I am adamant that it is not my report. However, the above errors may indicate that there is in face an error with my report. I haven't been using crystal reports for very long so it's very frustrating when there is no documentation helpful to the errors.

Similar Messages

How can you see what the WLC ACL is denying?

How can you see what the acl on our WLC5508 is denying? The counter keeps on going up but what is getting blocked is nowhere to be seen.

You are right but you can monitor that through the hits counts on the (WLC)Security->Access crontrol list === Hits
It will give you some idea for trouble shooting also you have the cmd line for details analysis.

How can I see the hidden file and erase it?

I had to make a file starting "." and had to put it on my FTP client. I made it by Text Edit and Microsoft word and save it. Since it is hidden file, I can't see on my Mac but when I use the FTP client and click post, the file listing was showed up and I can check as "Show Hidden file". Then I could post the files on the FTP client. However, since I don't need it on my computer, I'd like to erase it but can't find the files. How can I find the hidden files? Thank you.

if you know the folder then navigate to that folder. Open the Terminal application in your Utiities folder and do the following::
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.

How can you see all the open tabs?

When I use the drop-down Windows menu, it only shows the name of the window, not the tabs within each window. And I don't an option for "Activity Window" (like on Safari), or anything else that will show me all open tabs. How can I see them, as flipping through every open window is a pain....

Hi,
You can try to set '''browser.allTabs.previews''' to true in [http://kb.mozillazine.org/About:config about:config]. (In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear. Click '''I'll be careful, I promise!''', to continue to the about:config page.)
[http://kb.mozillazine.org/About:config_entries about:config Entries]

How can you see a date on a picture

When you take pictures how can you go back to see what date you took them

Not in the Photo app. You can after you import the photo to your computer. I have not checked to see if there are any apps allow you to view the date. Photoshop Express does not.

HT5616 How can you see a list of devices registered to use our apple ID for FaceTime and other services?

Sometimes I will get a notification that x device is using my apple ID for FaceTime (or other services). Sometimes it is just generic Mac Book Pro. His can I see which devices are using my ID (and can you see more details than just the name)?

I just started getting this message too. Just started the last couple of days. It doesn't give a time that it was used. All it says that "appleid" was used to sign in to facetime on Macbook. My Macbook is not named "Macbook." It also doesn't correlate to times when computer is being used.

How can you see matching tags in code view?

I'm trying to figure out how to do a very basic, common function in DW CS5.5 that's pretty much in every other IDE I've seen.
In NetBeans, for instnace, when you load a program, then click on a DIV tag, the program automatically highlights the end /DIV tag later in the code. This is extremely helpful when trying to find the extent of a section, especially in complex sites where nesting of DIVs is common. The function works the opposite way also, where you can highlight the end tag and the system will find the beginning one.
I can use the Coding Toolbar to collapse that section, expand it, and other things, but nowhere do I see a function that will just highlight the beginning and ending tags.
Is this possible in DW? If so, how can I set it up to do that?
Thanks.
Korky

That’s a limitation. No way around it.
Bob

How can you see what the actual fonts look like in menu?

In WORD - when you go to the menu bar to see the fonts, you'll see maybe a hundred of them - but you see them the list in the "actual" font style of each font! So in a few seconds you can actually "see" a hundred font types - makes it easy to quickly select which one you like.
I can't seem to do this in FCPro 5.04. I must click each font from the menu bar - type a word and THEN I see what it looks like. VERY TIME CONSUMING if you don't know your fonts!
Isn't there a way in FCPro se see all the fonts in a list in the actual "style" of each font - like WORD does? There's a haxie called "Fontcard" that does exactly this - but not in FCPro!
Can anybody do this - or I'm dreaming here - just keep checking them out 1 font at a time!!
Thanks,
Larry

Larry,
If you're not in too big a hurry when using Title 3D, you can scroll through the font list. As you go from one font to another, the characters you have highlighted will show in that font. Other than that, I use FontBook to preview fonts quickly.
-DH

Inability to RESUME download in ffox - how can you see if server supports resume e.g. any of the filehosts

hi: i have been trying to dl from filepost (file size 260) and occasionally it stops at 240.
i tried the answer in support to "dummy resume:"
https://support.mozilla.org/en-US/questions/672203?esab=a&as=aaq
it did not work.
how can i test if the site allows resume?
or do i need to test for a specific file on that filehost allows resume?
thankyou

Hi Cor-el
I found Opera. Opera browser does not compare to firefox greatness. Nor does their support help forums.
But Opera does have RESUME button on their download window.
The trick with opera, is to open the download manager in a new window, and make it look like Firefox great add-on DownloadManager Tweak.
then it looks the same, so you know what your doing
AND it has a download / RESUME button
fyi:
> I tested Opera Download on all the failed ones (trying the tricky rename workaround) '''Opera RESUMED in all 9 test cases.'''
> and where i could not get firefox to resume, not once in all 9 test cases.
so my conclusion is the workaround is not very good. And it had nothing to do with the server i was downloaiding from (in these 9 test cases)
perhaps..... in a future version: - firefox can also have the wonderful resume button, and the add-on Download Manager TWEAK, can also have the RESUME download button.

How can you see what computers are authorized with my account?

Good afternoon. I installed iTunes on my desktop computer at home because I began creating a music library. My first original install was on my laptop and then I decided to add iTunes to my desktop. When I authorized iTunes on my desktop it said it was the third computer that is authorized to play content purchased with this Apple ID.
How do I find out where else I have authorized iTunes? Is there a way in which a person can find out? Does my iTouch count as one?
If I rest the computers authorization will it delete my music library if I did that? I know you can only do it once a year. I am afraid someone else will use my account.
Thank You

In order to see which devices are authorized on your account:
Open iTunes
Click Store
Click Account
Click View Account
Enter your password
Look in the second section iTunes in the Cloud
To the far right you'll see Manage Devices
Once it's clicked you will see all of the devices currently authorized in iTunes/on your account
I was going to say, "Hope this helps," but based on the above, I'm pretty sure it did!
Thanks guys...

How can you see Software Update compliance breakdown by Client?

I want to see a view in the Software Library that breaks down by client what is shown in the "All Software Updates" node.
Basically, with SCCM 2012 you can see all the software updates and there compliance summary which is nice, however I can't find a way to see a detailed version of this that breaks this all down by client.
For example if I have a Software Update that is Required on 5, Not Required on 3, Installed on 4, and Unknown on 2 clients I want to know which specific clients make up those numbers. I want to know which clients are required, which are not required, which
are already installed and which are unknown.
There doesn't seem to be a view like this in SCCM 2012 and its very odd that it doesn't provide this look into the data.
Am I missing something, can someone point me to the way to see this data quickly.

I am aware of that view however that is just mapping the state number to a name for several different "TopicTypes". And the one you are point to is actually not for Software Updates Scan Status. The TopicType for a Clients Update Scans is 500,
which has 0-3 only. 0 is supposed to be Unknown, 1 not-required, 2 required, and 3 installed.
They set the status for an endpoint/update for 2 and 3 but I have several Unknown, and Not-Required and they don't write those rows to the database if they are in that state.
It seems when they are gathering data from the client the summarize everything, and one keep the specific rows for clients if they are required or installed, and they don't create a row for the other states. From some digging it looks like they stored this
data in 2007, but dropped in in 2012.
Maybe it is to conserve space or something I don't know but its stupid. It would be nice if there was a hidden setting that would enable it to store these rows as the database is set to collect them, they just don't.
FYI...
For WMI Queries you can use SMS_StateInformation which maps to the v_StateNames.

How can you see the progress when using a ForEach loop?

Hi,
I have an array with about 100 containers in it. My main thread uses a ForEach loop with an inner case structure with six possibilities. My previous program had all the steps in a very long list, executing them one by one. I find this new approach is much nicer to look at, and easier to change, but there isn't really any way of telling how far along the test is (unless you know it by heart). In the long list approach, you could see all the Done/Passed outcomes and how many remained, now there is no way of telling.
Any tips on making some kind of progress indication?
Solved!
Go to Solution.

As ObjectReference parameter, you should use 'Nothing'. The last parameter (synchronuous?) you can choose true or false. Please refer to the documentation of PostUIMessageEx for further information.
The numeric parameter should range between 0-100. Since it is "Progress Percent", this makes sense, does it?
The status bar has several panes, one e.g. displaying the logged in user or the used process model. The pane on the right most side will display the Progress Percent if used in your sequence.
The default reporting, as already stated, includes this feature. So if you have a sequence with e.g. 500 steps, the reporting "will have a visible progress" in that pane (with less than 100 steps, it is most often too fast to see). Remember that NI Sequence Editor and the Full Featured User Interfaces do have this feature, the Simple UI does not have it.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Calendar - Week view now only 5 days - how can you see a 7 day view again?

I like using the Week view in the Calendar, since upgrading to the latest OS a few days ago I can now only see 5 days in the Week view rather than the full 7 days I previously had. Can I change the settings so I can see the full week again?
Thank you
Solved!
Go to Solution.

In the Calendar app swipe from the top, choose Settings > General > and set Week View to full week. That should bring back the two missing days.

How can you see page previews in Folio Producer for pdf folio files?

Hi,
When we load pdf folios into Builder, Producer doesn't show us a preview of the page like it does for the jpg folio loads. If you click on the page area for the pdf folios, it just gives you a red box. Is there a way to see the page previews for the pdf folios like you can for the jpg folios? It makes entering metadata more difficult without being able to see the page preview.
~ Karen

That’s a limitation. No way around it.
Bob

How can you see a bigger contact picture not a circle

can anybody tell me how to add a bigger picture contact not the circle one.

Perhaps iOS 8 will bring back 'full screen caller ID'. Go to www.apple.com/feedback and voice your opinion about this feature.

How can you see a hidden Datasource?

Similar Messages

Maybe you are looking for