How can you set up 2 p2011w printers on the same wireless network?

Ii tried renaming one, but that didn't work. We had one, it works great, my boss loved it and bought another. Now we're all printing in his office because the one he got for us doesn't work. Any ideas?

Do a factory reset on your TC.
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec.
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Plug the LAN port of the BT router to the WAN port of the TC.
Start the airport utility in a computer and allow it to complete..
It should choose the right setup without intervention.. but you can then make sure of it.
So go to the edit tab by clicking on the TC in airport utility.
Then check the network tab shows off (bridge mode).
Go to the wireless tab and set a useful and simple and short wireless name.
You could even then click on the wireless options on that page and set a different name for 5ghz wireless.

Similar Messages

How can you share music wiyh another iphone in the same house that has not been connected to a compter

how can you share music on iphones in the same houes when one of phones has never been connected to a computer

Hello weeshaza,
It sounds like you are wanting to sync more than 1 device to your iTunes Library. This article will help you do that:
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Thank you for using Apple Support Communities.
All the best,
Sterling

How can I implement a backup 6500 that broadcasts the same OSPF networks?

I feel as though the answer for this is extremely simple, but my routing experience is very minimal. We have a 6500 switch that shares about 10 OSPF networks, which is behind out 7200 router; and we have a spare 6500 we would like to put into place at our second location as a failover. Can I add the same OSPF networks to this second 6500, or will this cause issues since two switches will be broadcasting the same network.
In the case that our core 6500 goes down, i would need the other 6500 to continue broadcasting these networks.

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Yes, it's possible for two locations to advertize the same networks, but this implies that both locations can (normally) reach all the hosts on those networks (at either location). Also, if there's some kind of failure, some hosts (like one location's hosts) often can no longer be reached. That's normally ok, but what's normally not okay is for hosts on the same network to be partitioned.
Also, when you start to have networks across locations, sometimes there's requirements for hosts to logically migrate to the site that still is advertizing the host's network.
It can all get rather complicated depending on what exactly you're trying to accomplish.

How can I set an event that occurs on the same day, not date, every month? Like Thanksgiving is on the third Thursday of November

On my PowerBook, I was able to set up events to show up on a specific day repeating each month, say the first Thursday. How can I get that on the iPad 2?

For your repeating even, I'm assuming this is your Yahoo calendar? that isn't a Firefox issue, I suggest you try to contact yahoo.
For the other issue, try the following:
Update to Firefox 15. Then, [[Reset Firefox – easily fix most problems]]

How can I set up purchase-to-order much the same as make-to-order

Hi all,
I apologise if this is posted in the wrong place but this is my first question that I couldn't answer by searching other posts/articles so I'm reaching out for some help and advice.
In PP, you can use a planning strategy to execute a make-to-order process which creates a production order specific to a sales order. Is the same possible within MM for creating a purchase order specific to a material required for a production order?
My example is this:
The BOM for FINI_ABC contains:
1 piece of PACK_1 (label)
1 piece of PACK_2 (container)
If I create a production order for FINI_ABC, MRP will obviosuly create requirements and purchase requisitions for both PACK_1 and PACK_2 materials. What I would like to achieve is for the production order number to be held within the purchase requisition and subsequently the purchase order.
This is required so that when the Purchase Order is created and sent to the vendor, they also receive the corresponding production order number. The vendor is then able to deliver the PACK materials packaged together for production which obviously eliminates some manual handling in the production warehouse.
As you see, it's very similar to Make-to-Order but I don't know where to start..........
Any help or advice to point me in the right direction would be very gratefully received.
Many thanks,
Rob

Hi Rob,
Some care must be considered in respect to what materials will you be managing in your stock, if FINI_ABC or PACK_1 and PACK_2.
I'm guessing by your description you mean FINI_ABC.
I think you can create PACK_1 and PACK_2 as service materials and at your pricing condition for FINI_ABC you can define one of this "services" as a free goods item. Unfortunately you could only assign one item this way.
Another thing you can use is the empties management and set this two items in a empties BoM. Check:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/43/0102827af25285e10000000a1553f7/content.htm
In SAP Retail you can be even be a bit more creative with BoM's in purchasing as I recall.
You can also follow a more simple rule albeit some development required. Create your PO with only your finished material and create a new BoM usage and your "Purchase BoM's" for this usage. Then you set your purchase order smartform or EDI message to read this information and place it on the layout. Although you don't get the info in ME23N your supplier will.
Hope it helps,
Edgar

I deleted my Firefox Sync Account. How can I set up a new account on the same device?

Now, when I open Firefox, and go to Tools, there is only the option to "Sync Now," rather than the option to "Set Up Sync." My account is definitely deleted, b/c Sync replies "Unable to locate your account" if I try to sync. How do I set up a new Sync Account on this same device? Thanks.

karenbee,
Here's the solution for PCs: Tools>Options, then click Sync in the Options window. Good luck.

Can you share photos between machines that use the same wifi network? Thanks for your help.

Can you share photos on i-photo between machines that use the same network or even between different accounts on the same machine? I know you can share music on i-tunes but can you do the same on i-photo? Thanks for your help.

Yes.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
You can figure out using it with another machine from that too

Can you print on an iPad mini using the same wireless printer that works with my iPhone5 or do you have to a specifically AirPrint capable printer?

Printing on iPad mini compared to iphone5

If you are printing from an iPhone the printer most likely already AirPrint capable. So it should work directly.
Alternatively, if you are using an App on your iPhone to print to it. You should be able to use the same App on your iPad.

Two C4585 printers on the same wireless network?

I have one C4585 working well on our wireless network, but I want to add a second identical printer on the other floor.
Most of our laptops are running XP, one runs Vista. What do we need to do to add the second C4585 to our wireless network?
Thank you in advance for your advice, TonyC
This question was solved.
View Solution.

OK, I think you will need to add the second printer from a PC that does not already have the software installed (uninstall it if that is what it takes). Get the latest software for your printer from the "Support & Driver" link at the top of this page, choose a Network installation.
Now, both printers are on the network and you can go use the "Add a Device" on each one to add the second printer.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can you text more than one person at the same time?

Is it possible to text multiple people at the same time?

Nope - not at the present time anyway.

Can you have two different itunes account on the same computer

how can you have 2 different itunes accounts on the same computer?

You would need two seperate users on the computer. Then each library would be independent of each other. Or do you mean two seperate iTunes store accounts?

How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
How to sync

How can you set the max row for a 'open cursor' in a stored proc?

I would like to know how can you set the maximum amount of row returned in a resultset coming from a stored proc?
You can do it via JDBC with cStatement.setMaxRows(10); but it works only for select that you do via JDBC...
I would like the same functionality using open cursor inside a stored proc...
Thanks...

is "where ROWNUM <= 10" the equivalent of "cStatement.setMaxRows(10);" because the ROWNUM as problem with the ORDER BY clause and the setMaxRows() as no problem...

How can you set a ringtone for unknown numbers

How can you set a ringtone for unknown numbers?

You can set up each one of your contacts with a ringtone and use the default for all other unknown numbers. There is no way to set up a ringtone for unknown numbers.

HT1373 how can you set up another iTunes account but keep all your purchases and music from a previous account

how can you set up another iTunes account but keep all your purchases and music from a previous account

An iTunes account is something you log into online to buy music.
An iTunes library is a collection of media and other items (including apps) on your computer. This is what you see when you open iTunes.
So, do you mean account or library? You can set up a new iTunes account but all your purchases made in that account will remain in the old account and cannot be moved. You can set up a new library by starting iTunes and immediately hold down the option key.

How can you set up 2 p2011w printers on the same wireless network?

Similar Messages

Maybe you are looking for