How capture Form Details in XML for a View and how to retrieve in 2nd View

Hi all
I have one typical requirement
in a View i have a form when i submit the form then those form details i need to store (capture) in one form and retrieve the same values from the XML file into another View.
if anybody worked on this requirement then can you please share the output.
can anybody have the documents or related sample codes then can please share to me?
Thanks
Sunil

Hi,
For this you have to create an XML file with the data from your view1 and in form2 call that XML file and read data from the XML file and display...
below links helps you in reading and creating XML files...
Reading XML file in web dynpro
Regards,
Srinivas

Similar Messages

Can I save each form after I fill them out? I have the same form to fill out for 250 customers and need to save each ones information. Will it do that?

I have the same form to fill out for 250 customers and need to save each ones information. Will it do that?

Hi,
Yes, you can save each form after filling the information, but each with a different name.
Regards,
Nakul

HT201209 I have forgotten my security answers for my account and need to retrieve

I have forgotten my security answers for my account and need to retrieve so I can purchase products.
<Email Edited By Host>

User to user forum.
Posting your email address on the internet is not a good idea.
http://support.apple.com/kb/HT5665

Sender and Receiver details in XML for FAX

Hi,
I have to send below informations in XML which is for fax(RightFax).
I am creating XML file in Smartforms.
They told me to provide sender and receiver details in XML. I dont know where to fill all these details.
Has anybody worked with RightFax for Smartforms? Please share with me.
Thanks,
Ramesh

hi,
upon understading your question i got a link.please go through this .
https://forums.sdn.sap.com/click.jspa?searchID=12286932&messageID=5229365
please reward me if helpful.

Use Sign.xml and Encrypt.xml for both request AND response within WSDL?

Hi,
ALSB: 2.6
I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
(Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
So far, it only works for either request or response BUT not both. i.e. within WSDL file
.....
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                           
                         <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
           Or

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                                   
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
But not both

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                                    
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                                   
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
...      Instead, I got error message like
<15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
, message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
<faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
ult></soapenv:Body></soapenv:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
X509v3
at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
        Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
Version: V1
Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 13052787793731294943682394984664645854838424340012907077330623....
The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
[pre]
$fault:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
     <con:errorCode>BEA-386201</con:errorCode>
     <con:reason>
          A web service security fault
          occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
          to get token for tokenType:
          http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
     </con:reason>
     <con:details>
          <err:WebServiceSecurityFault
               xmlns:err="http://www.bea.com/wli/sb/errors">
               <err:faultcode
                    xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
                    soapenv:Server
               </err:faultcode>
               <err:faultstring>
                    Failed to get token for tokenType:
                    http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
               </err:faultstring>
          </err:WebServiceSecurityFault>
     </con:details>
     <con:location>
          <con:path>response-pipeline</con:path>
     </con:location>
</con:fault>
So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
Thanks in advance
Sam

Instead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166

Pdf form in read-mode for the users and...allowing me to save my new modifications

I wanted to save a modification in my pdf form. Unfortunally, it was opened by another user in read-only mode.
When I tried to save my new modifications, my screen pops me up the classic error message: cannot not save because it is opened in read....
The form is stored in network shared drive and I am the owner. The users have the read only permission.
I open it with Acrobat Pro X and users open it with Adobe Reader XI. Both sofwares are setted with the enable protected mode and javascript disabled,
I tried to not use the preview mode in Windows explorer without succes.
Is my problem a bug or is it the normal way abobe acrobat works ?
Thank you for any replyer !

Hello Gkaiseril,
Thank you for your fast reply !
I am not at my office right now, however I am pretty sure in the Word case, I will be able to edit.
During my problem, I checked in the File manager on the server side (windows 2003 r2 sp1 x64). The reader had not write permission on the file, and I am the only owner with the full permissions.

Web-services.xml for EJB component and SOAP Message Handler Chain

I have used the following example for my own web service with EJB component and SOAP
Message Handler Chain:
http://e-docs.bea.com/wls/docs70/webServices/dd.html#1058208
I have a deployment error:
javax.naming.NameNotFoundException: Unable to resolve 'app/ejb/DocumentService.j
ar#DocumentService/home' Resolved: 'app/ejb' Unresolved:'DocumentService.jar#Doc
umentService' ; remaining name 'DocumentService.jar#DocumentService/home'
In attachement is the ear file.
Is there a problem in web-services.xml?
Thanks
[ws_dox_sdi.ear]

It works. Thanks,
Ioana
"Neal Yin" <[email protected]> wrote:
The error means your EJB is not deployed.
Adding a EJB module to your application.xml file of the ear should fixe
it.
<application>
<display-name />
<module>
<web>
<web-uri>dox_sdi.war</web-uri>
</web>
</module>
<module>
<ejb>DocumentService.jar</ejb>
</module>
</application>
"Ioana Meissner" <[email protected]> wrote in message
news:3cf640cc$[email protected]..
I have used the following example for my own web service with EJBcomponent and SOAP
Message Handler Chain:
http://e-docs.bea.com/wls/docs70/webServices/dd.html#1058208
I have a deployment error:
javax.naming.NameNotFoundException: Unable to resolve'app/ejb/DocumentService.j
ar#DocumentService/home' Resolved: 'app/ejb'Unresolved:'DocumentService.jar#Doc
umentService' ; remaining name 'DocumentService.jar#DocumentService/home'
In attachement is the ear file.
Is there a problem in web-services.xml?
Thanks

DW CS6, two column table in form, changing font size in 1st col and can't change in 2nd

In DW CS6, I made a two column table in a form for label/data. I reduced the font size in the 1st col (label) from 12 to 10px but can't change in 2nd col (data).

Give data an ID or Class name and style it with CSS.
For better answers, we need to see your code.
Nancy O.

I lost information recently on page I was working on for my website and want to retrieve it. I have no clue as to why 90% of the page was suddenly deleted.

I have a website. I was working on a post (not published) called "notes". I had a lot of very important information (about 90% of what I was working on) suddenly get deleted. I have no clue as to why. I did not press "delete", cancel or anything else. I probably just pressed a space bar and suddenly it was gone. Hours and hours of work vanished. I contacted my site host squarespace and they said they don't have access to it and to contact you. Is the previous information in a cache somewhere possibly? I don't know much about any of this. I will provide you with any information I can to possibly assist me in retrieving this important information I've worked for days and days on.
Thanks, Arthur

I'm assuming you were working on this on squarespace's website editor? Unfortunately there are no cached files that store what is being worked on in a text field. It's possible that what happened is this: You accidentally selected the text, pressed Enter, and that deleted it. You can try pressing Ctrl+Z when you are on a page to undo those sorts of changes, but if you've already left the page there is nothing that can be done to recover that text.

Form converts to XML data and I need the pdf form to be visable

Hello all,
I just created a form in pro 8 for our salesmen and it is a sales order form. I have sent it out to them to fill out and return it by pressing the email button in the form and some have come back as XML date stream and some came back as the original form with all fields filled in. I want to know how to get all of them to come back filled in instead of the XML Data. All salesmen have Reader 8 installed on the machines. Can anyone help me with this problem?
Thanks in advance,
Tony

Hi there, I'm myseld using the Application data-field in order to collect mobile forms OFFLINE.
I can collect as many mobile form as i want BUT, of course, need to be online to sync the data from mobile to their cloud.
Hope that helps.
Otherwise, would probably need to plug ur idevice and look for the application database with such tool as iConnector.

Report for Asset number and its Purahcse order number

Hello Friends,
Please give me details of report for Asset number and its Purchase order number .
Regards
Nilesh Vakil

hi,
GO to ME2N...
use SHIFT + F4..
there check for the acc. assign cata. field and input the asset and execute..
Regards
Priyanka.P

How to add extra fields in xml for BI report

Hi ,
I am trying to create a po print report .
I took oracle standard po print program , Cloned it with output as xml and based on that i am creating the layout for my po print report using xml publisher word doc tool . Now In the oracle po print rdf there is no field like requestor email,phone numbers. I want these two fields on my po print .How can i get those fields .If i see requestor portion in xml its as below
<LIST_G_ONE_REQUESTOR>
<G_ONE_REQUESTOR>
<ONE_REQUESTOR_NAME>FRANK, SCOTT</ONE_REQUESTOR_NAME>
          </G_ONE_REQUESTOR>
</LIST_G_ONE_REQUESTOR>
but I want some thing like
<LIST_G_ONE_REQUESTOR>
<G_ONE_REQUESTOR>
<ONE_REQUESTOR_NAME>FRANK, SCOTT</ONE_REQUESTOR_NAME>
               <ONE_REQUESTOR_PHONE>select 123456</ONE_REQUESTOR_PHONE>
               <ONE_REQUESTOR_FAX>111111111</ONE_REQUESTOR_FAX>
               <ONE_REQUESTOR_EMAIL>[email protected]</ONE_REQUESTOR_EMAIL>
</G_ONE_REQUESTOR>
</LIST_G_ONE_REQUESTOR>
How can I achieve this ...should I make a change in standard RDF for this or is there a way we can pull these details in xml itself ??
Please help .
Regards,
Chandra

I was just think on the same line if we can manage to fetch additional fields like phone number, email address of the requestor by writing a pl/sql in xml itself .But i see that atleast the requestor name should be passed into that query in case there is a way to do it .
Hopefully the change to rdf is the option .
Thanks Srini for prompt response.
--Chandra

How to populate a form from an xml file with multiple records

I want to be able to create a single form that will add pages as needed based upon the number of records being imported from an xml file.
I have an IRS form that does this exactly, but I do not know how to re-create it. I entered data into the form, then exported that data to xml. Then I opened that xml file in excel and added more records (this is just an easy way to manage the xml data in a tabular form). Then I import the changed xml file into the IRS form and it adds as many pages as I have records. Perfect! Unfortunately, I cannot edit the form to examine the technique. It does not appear to be relying upon any additional local javascript files. It does use an 'add page' button which may suggest the form is using the template .spawn() technique, but when I try that in my own form, it gives me unique field names for each page which are then not consistent with the xml data. Hopefully someone can help me understand what I am missing.

did you want
<record>0
<data>"11.97.23.174/32"
<record>address <data>
<record>address <data>
<record>subnet <data>
<record>ip <data>"10.97.23.174"</data></record>
</data></record>
</data></record>
</data></record>
</data></record>
or
<record>0
<data>"11.97.23.174/32"
<record>address <data>
<record>address <data>
<record>subnet <data>
<record>ip <data>"10.97.23.174"</data></record>

How to parse XML for internal table

hi guys, I would like to know how to parse xml for an internal table. I explain myself.
Let's say you have a purchase order form where you have header data & items data. In my interactive form, the user can change the purchase order quantity at the item level. When I received back the pdf completed by mail, I need to parse the xml and get the po qty that has been entered.
This is how I do to get header data from my form
lr_ixml_node = lr_ixml_document->find_from_name( name = ''EBELN ).
lv_ebeln = lr_ixml_node->get_value( ).
How do we do to get the table body??
Should I used the same method (find_from_name) and passing the depth parameter inside a do/enddo?
thanks
Alexandre Giguere

Alexandre,
Here is an example. Suppose your internal table is called 'ITEMS'.
lr_node = lr_document->find_from_name('ITEMS').
lv_num_of_children = lr_node->num_children( ).
lr_nodechild = lr_node->get_first_child( ).
do lv_num_of_children times.
    lv_num_of_attributes = lr_nodechild->num_children( ).
    lr_childchild = lr_nodechild->get_first_child( ).
   do lv_num_of_attributes times.
      lv_value = lr_childchild->get_value( ).
      case sy-index.
         when 1.
           wa_item-field1 = lv_value
         when 2.
           wa_item-field2 = lv_value.
      endcase.
      lr_childchild = lr_childchild->get_next( ).
   enddo.
   append wa_item to lt_item.
   lr_nodechild = lr_nodechild->get_next( ).
enddo.

ERROR for save a form created in XML Form Builder

Hello everyone:
I am having an error message when I try to save a form in the XML form builder and I donk know what I need to do for fix it.
Warning:
An error occurred when copying temporary files. The saved project state can be opened in the XML Form Builder, but the old state will be generated. The error was: An unexpected error occurred: null.
If anyone knows how to fix it I'll thanks your help!
Tzitzi

Hi, someone can help me with this?

How capture Form Details in XML for a View and how to retrieve in 2nd View

Similar Messages

Maybe you are looking for