How come my brother and i can't connect in the same game online using my WET54GS5?

When i first got my WET54GS5 my brother and i could connect in the same online session using two ps2's that are both connected to the WET54GS5 which is linked up to my WRT54G V 5 router flawlessly. Now all of a sudden whenever we try to connect to the same game online the one that is already in that session gets disconnected. There have even been times where one got connected and was using the other persons settings (example: Jared and Justin log on to the same game at the same time, Jared can't connect, but Justin can however Justin is now playing as Jared's character.)We can connect to other games under the same setup just whenever we want to play in the same game we can't. It seldom works though but only like twice out of ten times. I'm wondering what the issue is here and if anyone has any suggestions on how to get us connected to the same game with no worries. And if your curious both playstation 2's are running star wars battlefront 2. Message Edited by JJbro1 on 06-17-2008 09:47 PM
Message Edited by JJbro1 on 06-17-2008 09:48 PM

Try to figure out or make sure QoS is enabled on both devices (referring to bridge and router) and set to AUTO mode or fair mode. Also ensure there is no manual settings on the PS2s for ip (this applies to most modern game systems as well)
Udated gaming systems are designed to attempt taking full advantage of bandwidth available, by enabling QoS, or similar named technology depending on the brand of the network device you will prevent your gaming system from hogging all the network bandwidth and stomping out the other game system. They will be forced to equally share the bandwidth and eliminate this kind of situation. I sometimes need 7 game systems online at once and I ran in to this problem a lot,, QoS enabled and never had it again.

Similar Messages

I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page, but I can't work out how to do it - any suggestions would be greatly appreciated

brendanfromsydney wrote:
What are the different opinions on why pages should not achieve this?
As far as I know, Apple is free to choose to offer this or that feature.
They never said that they want to clone Word or even compete with it.
Differences between tables in both worlds are numerous.
In Pages (or Numbers)
- we can't sort a single column
- we can't sort by row
- we can't insert or remove a single cell
- a cell can't cross pages boundaries
If I understand well these design choices match :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+-++
Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

If I'm copying text and/or vector elements from Indesign to Photoshop how come their pixel sizes change even though I opened the same sized document and my indesign file is a web file?

If I'm copying text and/or vector elements from Indesign to Photoshop how come their pixel sizes change even though I opened the same sized document and my indesign file is a web file?

>my indesign file is a web file
Pardon?
Or do you mean that, when you created a new document, you choose Web as intent maybe?

My wi fi icon has disappeared from my toolbar and I can't connect to the internet

My wi fi icon has disappeared from my toolbar and I can't connect to the internet. How can I fix it?

In System Preferences > on the left panel, click the + sign (bottom right) to add a new Wi-Fi service then set it up.

How many 3440 x 1440 monitors can you connect to the latest MacPro?

How many 3440 x 1440 monitors can you connect to the latest MacPro?

Apple is not clean in:
Mac Pro (Late 2013): Using multiple displays - Apple Support
It includes
Can I connect more than 2 DVI or HDMI displays?
Mac Pro supports a total of two DVI or HDMI displays when connected via the built-in HDMI port or using the Apple Mini DisplayPort to DVI adapter. To connect additional DVI displays, use an active DVI adaptersuch as the Apple Mini DisplayPort to Dual-Link DVI adapter. You can connect up to six active adapter DVI displays. This requires a powered USB hub since Mac Pro offers four USB ports and you will need six to connect them all.
However, that article says:
Six Apple Thunderbolt Displays (27-inch), Apple LED Cinema Displays (27-inch), or third-party Mini DisplayPort displays.
So it appears you can with active dual-link DVI adopter or monitors with a display/min displayport connection.

Safari won't trust ANY website certificate, even after I tell it to, and i can't connect to the APP store even though I'm clearly connected to the internet. This all started immediately following a RAM upgrade. Please advise.

Safari won't trust ANY website certificate, even after I tell it to (click Always trust this site option), and i can't connect to the APP store even though I'm clearly connected to the internet. This all started immediately following a RAM upgrade. Please advise.

Take each of the following steps that you haven't already tried. If the problem isn't solved, ask for further instructions.
1. Are the current date (including the year) and time shown on your system clock? If not, correct them and test.
2. Disable any third-party firewall, "security" software, or network filter.
3. In some versions of OS X, Parental Controls has a bug that prevents loading of secure websites. Turn it off.
4. The process by which OS X checks the validity of root SSL certificates doesn't work behind the authenticating SOCKS proxies used on some enterprise networks. If applicable, contact your network administrator. The proxy server may need to have its settings changed.

HT5085 hi, i bought itunes match yesterday, and i can not connect with the server. Error 4010 appear ever time when i want to entry on Itunes match.Thanks

i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
Thanks

Here are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall.

TS1368 I've updated my iPad to OS7 and now can't connect to the App Store. It works on my phone and interject connection is fine. Any thoughts?

I've updated to OS7 on my iPad and now can't connect to the App Store. The internet is working and it works on my phone, though slow; is this an App Store problem or a problem with the software upgrade? Am I alone with this issue?

belive it or not this worked for me:
“Go to Settings > General > Date and Time > Set Automatically > Off. Set the date one year ahead. Try to update the apps again or press the button from Passbook. If you get an error message, go back to the Settings app and change Date and Time > Set Automatically back to On. Then go back and try again.”
please note that when you go to app store when you change time to future go through passbook / and close the app then and then wehn you set time back to auto go back to app store through passbook and it will work then close it and then normal app store icon will work form now on
good luck

I just updated my software to iOS 6 and now can't connect to the internet

I just updated my Ipad 2 to iOS6 and now can't connect to the internet. Is anyone else having similar problems?

Swipe up or drag up on the app window to close the app.

My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanks

There is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems.

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB

I have a serious contacts redundancy problem. First I have multiple email account formats, e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contact

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

I have a serious contacts redundancy problem.
First I have multiple email account formats,e.g., 2011 MacOutlook, 2008 Entourage, 2007 Window Outlook, iPhone Exchange and these are all connected to the same account. The problem is I had up to 15 contacts for the same person.
I deleted the Entourage contacts as that seemed to be the program that was causing the problems. When I synced this morning, now all my contacts are gone from every where.
How can I restore to my last back? If I restore, it will ask to restore to the back that was just made… which has no contacts?
Help would be greatly appreciated !!

I have an iPhone 5 an iPad and iPhone 4S all connected to the same apple ID, but for iMessage for some reason it uses my husbands phone number

I have an iPhone 5 an iPad and iPhone 4S all connected to the same apple ID, but for iMessage for some reason it uses my husbands phone number

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

HT4437 I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"

Welcome to the Apple Community Willy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.

TS2235 Hi, how can I print from my IPAD to my wireless HP 6520 printer. I have a wireless network and my IPAD and wireless printer are connected to the same network. But when I send a job, I get the "no air printer found" message.

My windows firewall is disabled (protected by Comcast's Norton program) so that should not be a problem. Should I down load Bonjour?

Hello Bleedingblue65
Check out the section highlighted below to troubleshoot your issues printing through AirPrint.
AirPrint Basics
http://support.apple.com/kb/ht4356
If you are unable to print, or if you see the message "No AirPrint Printers Found"
Verify that the printer:
Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
Is connected to the same Wi-Fi network as the iOS device.
Has the latest firmware version installed.
Has paper with enough ink or toner installed.
Is free of any errors displayed on the printer's control panel.
If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
Notes:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.
Regards,
-Norm G.

How come my brother and i can't connect in the same game online using my WET54GS5?

Similar Messages

Maybe you are looking for