How come my mini iPad is not working after trying to update apps?

My mini iPad is repeatedly showing me a black screen with a, "white apple," in the middle & then a couple of minutes later it turns off for a few minutes. Then the black screen with the, "white apple," in the middle comes back on again and then it goes black again. Sometimes the black screen would lighten and the whole pattern of these "screens" would start over again. It's been doing this for hours since I fell asleep.
This happened when I was trying to update 4-5 apps at the same time. It had trouble updating the, "Pinterest app." It failed once and I retried it and that's when my mini ipad started to not work. I can't use it at all. I never had trouble updating several apps at one time before. I was at home using my wifi and my wifi strength was at its maximum for the iPad.
The battery was at 40 something%, so I charged it over night. It has the latest iOS update software. I had downloaded that yesterday.
I plugged it into iTunes on my computer and the same thing is happening. It's picking up my icloud stuff like my music and videos and my computer is trying to import photos from my mini ipad automatically, but my iPad isn't fully recognizable on iTunes. I get 2 error messages. One says, "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." I also get an error when trying to import photos (just to try it out). The other error message says, "The iPad cannot be sync because this iPad cannot be found."
And so, I unplugged it and plugged it back in and I get the same response. My iTunes is the latest version.
I don't have warranty on this iPad and I spent like $500 on this one. I'm kinda worried...?
Any kind of response would be appreciated....

First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Similar Messages

  • The device mini iPad is not working  after the update of the system

    Hello,
    I need help that my mini iPad is not working at all. I started an updating process from the system but then it shuts down and it never opens again! even though the charge is full.
    please replay me .
    Best,
    Mawaddah

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • How come my Iphone4 ringer is not working after upgrading to iOS 5

    I recently updated my iphone4's firmware to iOS 5. I just found out that my ringer is not working anymore. It seems like it's always in silent mode. I tested music and it worked fine. Please help...thanks in advance

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT1414 Ipod Mini not working after trying to update to IOS7

    Team Apple....HELP!
    I recently tried to in tall the new IOS 7 on my Mini Ipad....but I get the connect to Itunes with USB cable on the screen. 
    I've intalled the latest updates to the OS on my MAC Laptop and the latest version of Itunes.
    Itunes saw a system that needed to be restore and took two hours to down load something (sorry, can't recall).  After the down load, I'm still stuck with the conect to Ituense with USB cable on the screen.
    Ok, I've tried all the below intsrutction from these links, with no success:
    http://support.apple.com/kb/HT1414
    http://support.apple.com/kb/HT1808
    http://support.apple.com/kb/TS1591
    Any help or suggestions would be appreciated.
    G

    First, try a system reset although I can't give you any confidence.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT201210 my Ipad will not restore after trying to update what do I do?

    I tried to update my Ipad to 6.0 .  NOw I am getting an alert that was unable to restore!!!  What do I do?  All I was trying to do was add some music to my IPAD!!

    Did you get an error #? What iOS version are you currently running?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • ITunes error - will not work after trying to update to 7.2, then to 7.3

    I have tried to update to both 7.2 and to 7.3, but both updates have failed. Now I am stuck on 7.1 with an error, where my iTunes will not operate and I cannot uninstall because it comes up with the same error that I get when I try to install or uninstall.
    Below are links to images of the errors:
    Here is the error I have currently:
    http://i11.tinypic.com/4qfw4yc.jpg
    Here is the error I get when I try to reinstall, update or uninstall:
    http://i7.tinypic.com/6he0ft0.jpg
    I would appreciate your assistance!

    It sounds as though you need this article on trouble installing iTunes:
    http://docs.info.apple.com/article.html?artnum=93976
    You need the section at the end after "Important: A majority of customers..."
    I think you need to do a full removal of iTunes and quciktime with clean up. But the important bit is to clean up the installer files with the MS Installer Clean Up Utility.
    If cleanup doesn't seem to work, it is worth checking you have the right version of the Windows installer. If you find it in add remove programs, it should say "Windows Installer 3.1 (KB893803)"

  • How come duration in iPhoto does not work properly

    How come duration in iPhoto does not work properly

    Try select the Album in the Source Pane only, and not any of the pics in it.
    Regards
    TD

  • The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

    The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

    I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
    It is kind of a drag because you wil have to retweak everything but it's helped for some.

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • How can I get my printer to work after a Yosemite update?

    How can I get my printer to work after a Yosemite update?

    Hi there michaelfromepsom,
    You may find the printer troubleshooting steps in the article below helpful.
    Troubleshooting printer issues in OS X 
    -Griff W.  

Maybe you are looking for

  • Javabean is not working after adding webutil.olb in form 10g

    I have created a form in which I am using javabean for running marquee and is working well. I have also attached webutil library in that form and it's working well also. But when I am adding webutil.olb in that form marquee stops to work. I have give

  • Sharing A Solution - CREATING A SET OF SUB MENUS ON MAIN MENU IN iDVD

    A recent question I posted got some attention from a number of people about how to create a set of sub menus on the main menu of an iDVD project. Evidently there are a number of us who tried to find a way to do this. I attended an Apple Store iDVD wo

  • Snapshot Report taking long time

    Hi, We have snapshot collection every 1 hour in our db and the process is taking 1/2 hour to run and it is the highest resource hog while it is running. what can we do to avoid this scenario ? Quick help ismuch appreciated. We use oem 11g for a 9.2.0

  • Intermedia and SQL*Loader

    I created a small test table to try and figure out the syntax for the control file for SQL*Loader. I'm using what I found on technet but I can't seem to get past -> ** SQL*Loader-416: SDF clause for field LOCALDATA in table QUERY_INTERMEDIA reference

  • Sub contracting process BOM - In case of material to be disassemble

    How to create the reverse BOM in case of Material to be dis assemble at the vendor end. In this case we will be issuing one assembly to the Sub contracting vendor and he has to dis- assemble the assembly in 4 or 5 different components. How to create