How come querystring variables don't work with Flash Slide Presentations

How come querystring variables don't work with Flash Slide
Presentations
When I create a regular new Flash FLA and publish it I can
add a querystring to the file name in the object tag and get that
value back in the flash move like this:
myflashfile.swf?myname=andrew
But when I try the same thing using a new Flash Slide
Presentation with screen, it doesn't work.
Is there something I'm missing that I'm not aware of or does
the Flash Slide Presentation not support the use of querystrings?
I have tried this using a mix of PC and Mac with MX2004 Pro
and Flash 8 Pro.
Any reference links or ideas are much appreciated.
Thanks,
Andrew

Good info found here:
http://flashmx2004.com/forums/index.php?showtopic=971&hl=query

Similar Messages

  • How come face time don't work.

    How come face time don't work.

    Impossible to even guess when all you say is "don't work". Provide full details - I'd suggest posting in the "Using iPad" rather than in this forum which is for people using iPads in large organizations - and then perhaps someone can offer suggestions.
    Regards.

  • Letter keys don't work with Flash.

    The letter and number keys on my keyboard don't work when i'm playing Flash games. The arrow keys, shifts, spacebar, etc. all work, but the first letter or number that I press gets stuck down (functions like I was holding it down) for ~ 10 seconds, and then none of them work after that(even once that key is no longer acting as if it was held down).

    So i just had this exact same problem and worked for hours to find the answer. Space and arrow keys worked, but letters only worked one time. I bought a Lenovo Laptop that came with the program "GuardedID" pre-installed on it. It functions as a decoder for the keys when using flash based games and other things. So when i pressed the key for the first time on the games it would act as a number instead of letters, therefore making it not work. I searched on Lenovo's website in their forums and found the answer to be "delete GuardedID" It has an error in the program. I deleted it and my keys worked immediately in flash games. So if you have a program called "GuardedID" the answer will be to delete it. or if you have a similar program that changes your keys to a different code while on the internet, you need to get rid of it.

  • Network variable don't work with VBAI 2010 and windows 7

    Hi,
    I actually have an issue with 2 EVS 1464 (windows 7) and VBAI 2010.
    I have to use network variables to allow communication between both EVS but I can't use it. My network is ok (I can make a ping betwen both equipement) but I can(t acces the network variable.
    I have made a test with VBAI2011 EVS / VBAI2010 PC windows XP --> it works. (but I don't want to use VBAI 2011).
    Have you got some solutions to solve my problem?
    Thanks
    Ulysse
    Solved!
    Go to Solution.

    Hello,
    Here are several documents which could be useful for you :
    Using the LabVIEW Shared Variable
    Troubleshooting Network-Published Shared Variables
    How Can I Use Shared Variables to Transfer Data from Vision Builder for Automated Inspection (VBAI) ...
    You can also try something. For this, you must go to the VBAI EXE here:
    For 32-bit machines:
    C:\Program Files\National Instruments\Vision Builder AI 20XX\
    For 64-bit machines:
    C:\Program Files (x86)\National Instruments\Vision Builder AI 20XX\
    Right-Click on 'Vision Builder.exe' then select Properties.  Make sure that 'Run this program as an administrator' is checked.
    Click OK and then try running VBAI again. You may have to re-deploy the variables in variable manager before they will properly work.
    Regards,
    Jérémy C.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure
    Du 2 au 23 octobre, partout en France

  • How come the backgrounds don't work in photobooth?

    I tried using the backgrounds for photo booth, and my picture always turns out really distorted, what should I do?

    What exactly is happening? Does the background work, then disappears as soon as you get in frame or is removes the wrong parts of the image, or is it something else?
    Because if it's that (which is a problem some people have had), I think it could be the auto exposure on the camera screwing up the background. All it's doing is comparing the pixels before and after, and if the exposure changes on the iSight camera (also if the background and foreground images are too similar), it will ruin the effect (which is why all the demos of backgrounds were done in professionally-lit environments).
    If that's not what the problem was, I'm not really sure.
    Message was edited by: Tyler Dykstra1

  • How come forms central doesn't work with my iPhone?

    Forms Central works great from a PC, but when I try and load the sign in page using my iPhone, it tries to load a page, gets half way, then a new web address comes up, tries to load that page, and goes back and fourt and is stuck in a loop. What's happening?

    I am having this same issue.

  • How come Facebook randomly won't work with Safari?

    Whenever I try to access Facebook on Safari, it says "Safari cannot establish a secure connection to the server". I've tried looking at my firewall, parental controls, deleted cookies. I've reset safari and my router. I downloaded google chrome, and Facebook works on there. It also works on the other computers in my house (using Safari).

    Nope Neither of those or any other Anti Virus Software

  • ColdFusion 8 - Client Variables don't work with PostgreSQL

    RedHat Fedora Linux
    PostgreSQL version 8.2
    ColdFusion version 8 Developer
    Steps to create problem:
    Creating Client Variables in the "ColdFusion Administrator".
    checked "Create Client Variables" pressed "submit"
    Results:
    The "ColdFusion Administrator" errors out.
    Problem:
    "ColdFusion Administrator" calls a the page "postgresql.cfm",
    which creates the tables in the database.
    Until "ColdFusion" executes the SQL "create table CGLOBAL
    (cfid char(64), data text, lvisit datetime)".
    According to PostgreSQL website and documentation, the data
    type "datetime" doesn't exists."
    Valid 'time/date data types' are timestamp,interval,date and
    time.
    Question:
    Is there some way of getting "ColdFusion" to "create a
    'Client Variables' database" in PostgreSQL DBMS,
    using "ColdFusion Administrator?
    What are the SQL statements to "create a 'Client Variables'
    database" by hand?

    Have you viewed the Livedocs section at
    Client
    Variables page? It does explain the process for creating client
    variable tables:
    Use the following sample ColdFusion page as a model for creating
    client variable database tables in your own database. However, keep
    in mind that not all databases support the same column data type
    names. For the proper data type, see your database
    documentation.
    This is where you can substitute the correct data types that
    are appropriate for your flavor of DBMS.
    Phil

  • When I try to open firefox it says that it is not responding, after I disabled the adobe flash plug-in it worked, how do I get it to work with flash

    Since I updated my adobe flash player firefox keeps saying that it is not responding after I open it and it loads my home page, I disabled add-ons and went throught the process of figuring out which one it was and it was adobe flash, but without flash I cant access a lot of different sites, how can I fix this. I have tried uninstalling and reinstalling both firefox and adobe flash, but neither works!

    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]

  • Flash Slide Presentation...how to control volume?

    Hello,
    I am working in Flash Slide Presentation mode. I have a
    started a sound file playing on the "master" slide and I want it to
    play throughout my entire presentation. However, on a couple of
    slides, I want to play some short voice clips. How can I "turn down
    the volume" a bit on the main sound file so as to hear the short
    voice clips? And then turn it back up when the voice clip ends?
    I understand basic Actionscript. Can anyone tell me the code
    or point me to a tutorial which I can use to accomplish this?
    Thanks in advance.

    Ah, I was tying the (unavailable ) controller number and I didn't see the pitch controller option spelled out in plain sight!

  • A few of my pages don't work with Firefox nor Chrome. How do I fix this?

    I created my website from scratch (enjoyaquatics.com) but unfortunately a few of my pages don't work with Firefox nor Chrome. How do I fix this?
    Everything looks and works GREAT on Safari but not Firefox, Chrome, nor Internet Explorer.

    The pages look fine in FF and Chrome on my Mac. Didn't check with Win XP.
    If you use MSIE on a Mac, know that it became obsolete in 2003.
    I noticed what I call wobbly text on your pages. Here's the solution :
         iWeb : Prevent wobbly text in textboxes

  • Graphics card Quadro K4200 don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

    I have purchased graphics card Quadro K4200, but graphics card don't work with cuda in Adobe Premiere CS 6 version 6.0.5. Maybe they are bad drivers for graphics card? How to solve this problem?

    Did you use the nVidia Hack http://forums.adobe.com/thread/629557

  • Update to kichat: FAQ 2 - How to get my router to work with iChat?

    kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
    (Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
    Getting your router started with iChat.
    Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
    Glossary for this FAQ
    Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
    Routers seem to fall into two categories
    Those that work straight from the box. See Apple Article HT1787
    NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
    Even then some list that they need tweaks.
    and those that do not.
    This post will deal with what you may need to look at.
    First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
    Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
    In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
    Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
    Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
    The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
    Opening or Allowing ports. Several Methods not all devices have all of them.
    DMZ (Demilitarised Zone)
    This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
    Port Forwarding (also Virtual Server or Pin Holes)
    These settings are usually found in an Advanced setting.
    You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
    See this pic for an example of the description above.
    In this example shows that on some Port AND Protocols need to be listed.
    iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
    See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
    My Note 2:
    On the first link Note 1 under tables in that link would be better if it read:
    " 1. All iChat AV traffic is UDP -
    except for ports 5190 and 5298, which need to be open for both TCP as well;
    and 5220, 5222, which need to be open for TCP only. "
    Note 2
    GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
    UPnP Universal Plug n Play.
    This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
    By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
    They close after the application has finished with them on a timed basis.
    On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
    Trigger Ports
    Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
    The first port for incoming Video or Audio invites is port 5678.
    Pre iChat 4
    When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
    See this variation where only the ports listed above are completed.
    The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
    iChat 4
    The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
    At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
    Wireless
    Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
    Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
    Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
    Multiple devices
    Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
    Further Help
    I have found that this site (ADSLGuide) to be helpful.
    It is British based but I have linked you to the Apple Related Discussions Forum.
    Eliminating Problems on my Personal web pages.
    The ports and their function within iChat. (my personal Web pages again)
    This is not a step by step approach. You will have to read around the information about your device.
    Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
    Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
    Click on your device.
    Select iChat on the next page.
    Follow the info on the next.
    This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
    Gives you a chance to look at at pics to give clues to where some of these other things are.
    With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
    and to EZ Jim for his work on iSights on my web pages.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:51 PM Saturday; December 6, 2008

    kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
    (Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
    Getting your router started with iChat.
    Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
    Glossary for this FAQ
    Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
    Routers seem to fall into two categories
    Those that work straight from the box. See Apple Article HT1787
    NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
    Even then some list that they need tweaks.
    and those that do not.
    This post will deal with what you may need to look at.
    First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
    Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
    In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
    Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
    Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
    The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
    Opening or Allowing ports. Several Methods not all devices have all of them.
    DMZ (Demilitarised Zone)
    This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
    Port Forwarding (also Virtual Server or Pin Holes)
    These settings are usually found in an Advanced setting.
    You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
    See this pic for an example of the description above.
    In this example shows that on some Port AND Protocols need to be listed.
    iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
    See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
    My Note 2:
    On the first link Note 1 under tables in that link would be better if it read:
    " 1. All iChat AV traffic is UDP -
    except for ports 5190 and 5298, which need to be open for both TCP as well;
    and 5220, 5222, which need to be open for TCP only. "
    Note 2
    GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
    UPnP Universal Plug n Play.
    This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
    By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
    They close after the application has finished with them on a timed basis.
    On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
    Trigger Ports
    Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
    The first port for incoming Video or Audio invites is port 5678.
    Pre iChat 4
    When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
    See this variation where only the ports listed above are completed.
    The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
    iChat 4
    The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
    At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
    Wireless
    Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
    Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
    Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
    Multiple devices
    Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
    Further Help
    I have found that this site (ADSLGuide) to be helpful.
    It is British based but I have linked you to the Apple Related Discussions Forum.
    Eliminating Problems on my Personal web pages.
    The ports and their function within iChat. (my personal Web pages again)
    This is not a step by step approach. You will have to read around the information about your device.
    Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
    Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
    Click on your device.
    Select iChat on the next page.
    Follow the info on the next.
    This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
    Gives you a chance to look at at pics to give clues to where some of these other things are.
    With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
    and to EZ Jim for his work on iSights on my web pages.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    9:51 PM Saturday; December 6, 2008

  • I upgraded to Mountain lion. I could not open any of my word documents so i downloaded Libre Office. It is downloaded but how do I get it to work with my old documents??

    I upgraded to Mountain lion. I could not open any of my word documents so i downloaded Libre Office. It is downloaded but how do I get it to work with my old documents??

    I don't know what file formats LibreOffice supports, but my guess is it can only handle the OpenXML format (new Office docs).
    You could use this online converter: http://www.zamzar.com/convert/doc-to-docx/

  • Hi I have a Lexmark all in one printer how do I get it to work with my ipad mini

    Hi I have a Lexmark all in one printer how do I  get it to work  with my  mini ipad

    It depends upon the model. It's wifi-enabled ? And is it listed on this page as supporting AirPrint : http://support.apple.com/kb/HT4356 ?
    If not then do Lexmark have their own app in your country's store that supports that model ? If they don't then there are a number of third-party printer apps such as Print n Share and PrintCentral Pro which might work with it.

Maybe you are looking for