How could I config a Delivery Notes for a shipping point ?

Hi Experts!
I need to config a new delivery notes especially to tie a shipping point and a revenue channel...do you know how to proceed??
Actually, my client already have a delivery note for a shipping point and a revenue channel, but now I need to create another type of delivery note with other number range for a different shipping point and revenue channel...
I do not know the path in spro neither if I need to use a Tcode transaction....
Please let

the path is for creating new delivery types which can be processed thru txn vl01n, vl10b etc. when you want different delivery types to handle differnt sales document types.to deal with say free samples exports sales from depots etc differently.
you must be meaning the output from vl03 , is it?

Similar Messages

How could I set the proxy settings for just some URLs and not for all?

Hello,
I am using HttpURLConnection to establish a HTTP connection . The connection pass through a proxy, and it requires security.
I know that I can set the proxy settings in the system properties, and this works perfect.
But I don't want to set the proxy settings in the system properties, because this proxy settings will be for ALL the URLs, and I just want for a few URLs.
How could I set the proxy settings for just some URLs and not for all?
Thanks

java.net.URL.openConnection(java.net.Proxy proxy)
@since 1.5

How to prevent a printing of Delivery Note for Spcecific Material Type

Hi,
I had a requirement wherein it was required to "Prevent Mask Delivery notes from printing to Shipping dept"
addition info: All delivery notes are currently set to print in shipping. We can put in a logic to prevent the printing of
delivery note for a specific material type (like mask)
for this i used copy control routine 'RV61B902' in the include for tcode vl02n or vl01n..
my logic is fine..
include 'RV61B902'.
sy-subrc = 0.
DATA : w_matnr LIKE lips-MATNR.
IF T683S-KSCHL = 'LD00'.
IF sy-tcode = 'VL01N' OR SY-TCODE = 'VL02N'.
    select matnr into w_matnr from lips where vbeln eq komkbv2-vbeln.
      condense w_matnr.
      if W_matnr cs '*MASK'.
          SY-SUBRC = 4.
          exit.
        endif.
    ENDSELECT.
ENDIF.
ENDIF.
question : My check was overwritten by the subsequent logic
please advise.
ESWAR
Edited by: tarakeswar rao on Nov 5, 2008 3:39 PM

end user wants output to be stopped right, that will be controlleed in Output requirement only.
What does that has to do witj copy control. It will not do anything in your case

How do I switch on delivery reports for a Nokia N8...

Hi There
I'm probably being a bit stupid here, but I can't find anything in the N8 online manual! How do you switch on delivery reports for when you send text messages, to see if someone has A) recieved your text, and if possible B) read it!
Thanks for your help
Solved!
Go to Solution.

Delivery reports are a network feature so it's not surprising that Nokia could not help you with them.
If they stay pending then it's likely that you are on a network that doesn't support them or the service isn't enabled on your account (for example you are on a network that charges for delivery reports).
If your network does not support them all you can do is disable the feature and delete the pending reports. If deleivery reports are essential to you then you'll need to switch to a network that does support them.

How do I set the delivery policy for a queue in iMQ 2.0?

The list on page 67 of the 2.0 administration guide appears to be
incomplete. Specifically, I'm interested in knowing how to set
the default delivery policy for a Queue through the jmqobjmgr command.
I need the valid attribute name to pass in to jmqobjmgr.

The "queueDeliveryPolicy" is an attribute of a queue
created in the broker - not in the administered object
destination so that is why you are not seeing that
attribute on the list on page 67.
By default, the broker by will use the "single" queue delivery
policy unless you choose to change the values of the property
"jmq.queue.defaultdeliveryPolicy" to SINGLE, ROUND-ROBIN, or
FAILOVER. If you would like to do this, see the Chapter 4
in the admin guide on "Starting and Configuring the Broker".
It may be easier to set the delivery policy for just one queue.
To do this, you can use the following command:
jmqcmd create dst -n myQueue -t q -o "queueDeliveryPolicy=f"
where valid values to queueDeliveryPolicy is f, s, r.
You can do a 'jmqcmd -H' to get more info on queue attributes or
see Chapter 6 in the admin guide on "Creating and Destroying Destinations".

How could I install a plug in for Aperture?

how could I install a plug in for Aperture?

OK no installer, not nice but not fatal.
I assume you already downloaded the file from the web site. Locate it in the Download folder and double click it. That will extract the plug-in from the zip file.
Now the tricky bit. The Library folder in your Home folder is no longer visible in Lion (thanks Apple ) There are ways around this the easiest is to open Finder hold down the option key and select Go from the menu bar. Your Library folder will be visible in the list of folders shown. Select it.
You are now in the Library folder, select the Application Support folder and then select the Aperture folder. If you have no other plug-ins installed you will need to create the Plug-Ins folder, do that. In the Plug-Ins folder create the Export folder. That is where you will copy the plug-in to.
So open another Finder window locate the plug-in you extracted from the zip file and drag it to the Export folder. Restart Aperture and the plug-in should be visible in Aperture.
Good luck.

I'd like to transfer the photos from iPhone to MacBook Air. My iPhoto used to detect my iPhone automatically, but it doesn't happen anymore. How could I fox this? Thanks for helping!

I'd like to transfer the photos from iPhone to MacBook Air. My iPhoto used to detect my iPhone automatically, but it doesn't happen anymore. How could I fox this? Thanks for helping!

Check the iPhoto preferences:
From the main menu bar: iPhoto > Preferences > General:
"Connecting camera opens" : Set this option to "iPhoto".
If that does not help, disconnect your iPhone and reset your iPhone.
To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.

Serial Number assignment in Delivery Note for Make-to-order

Hi experts,
In our current design, we have made it obligatory to enter the serial number in the delivery note for make
to order stocks.
We are also implementing PP and we would like to capture
the serial number specified in the production order and
automatically populate the serial number in the delivery.
Any suggestions on how I can do this is greatly appreciated.

Hi Karun,
Thank you for your kind advice all the time.
I have been looking into it but the LIPS structure does not contain the serial number field...
I have been looking for the routine in the copy control
but have no luck finding such routine...
Thanks for your continuous help and assistance.

VL10C double delivery notes for one sales order

Dear all,
Currently we encountered an very strange issue in our SAP. we found that via VL10C, SAP create two duplicated ourbound delivery notes for one sales order, which resulted in a double items and amount in the billing document. These two deliveries notes are complete the same, which were created with 7 sec interval via VL10C. Check in the sales order, we can see delivery Qty was double against order Qty for all the items.
does anyone have a clue on this issue? your effort and feedback will be most applicated!
Thanks & Best Regards,
Kyo NG

Hi,
I forgot this possible cause. Check Note 61148 - VL04 VL02 AME807 AME815: Insert to table VETVG and related notes, specially Note 931297 - VL10x, VL10HU - Duplicate entries displayed in STO.
Regards,
Eduardo

How to trun off batch determination for certain shipping points ?

During Delivery Notes creation we would like to turn off the batch determination on basis of certail shipping points. can some please guide what is the best way to do it. We do not want it turned off for all the shipping points but for a special ones.
The idea is when we create Delivey for certain shipping point we do not need to fill in the batch code and yets save, pick confim, goods issue during delivery creation process....
we have sepcial shipping points for consignment process and for them we need to skip the batch determination......
Thanks in advance
Rajey

I don;t think you can control based on shipping point because batch creation is controlled at movement type level

Invoice Splitting - for some shipping points and not others

Dear Gurus, I have a requirement where for some shipping points I need to be able to split an invoice on sales order (i.e. a separate invoice for each customer order) and for other shipping points I require a single invoice for multiple customer sales orders. Using the copy control rules for LF to F2, I have set the Refence Number to B but this does not achieve what I want. Would it be possible to achieve this via a copy requirements routine and by setting the values in VBRK-ZUKI? Do I just copy the standard 003 routine and apply my changes here? If yes, where do I insert the code - the top or bottom? Regards

In VOFM, first of all "Copying requirements" are used when we want to stop creating a target document from a source document or to prevent certain items from copying to target document under certain conditions. Copying requirements can't be used to do invoice split.
Data transfer routines are the ones that allow invoice split (in addition to allowing copying fields from source to target). Although "copying requirements" is a loosely used terminology, it is important we make distinction between copying requirements and data transfer routines as both are different and perform different functions.
SAP uses field VBRK-ZUKRI (a 40 character field) to store the combination of field values that are used as basis of invoice split. Invoice split happens if any of the fields stored in VBRK-ZUKRI differ across orders/deliveries (or their items) from which invoices are created.
We assign VBRK-ZUKRI during item copy control in data transfer routines. The fields are simply concatenated and assigned to VBRK-ZUKRI.
in VOFM, "Data transfer" routine 003 for Billing documents for example splits the invoice for each reference document, as shown by code below
Include FV60C003
*       For each reference document an invoice is created
FORM DATEN_KOPIEREN_003.
DATA: BEGIN OF ZUK,
          MODUL(3) VALUE '003',
          VTWEG LIKE VBAK-VTWEG,
          SPART LIKE VBAK-SPART,
          VGBEL LIKE VBRP-VGBEL,
        END OF ZUK.
ZUK-VTWEG = VBAK-VTWEG.
ZUK-SPART = VBAK-SPART.
IF KURGV-PERFK = SPACE.
    ZUK-VGBEL = VBRP-VGBEL.
ENDIF.
VBRK-ZUKRI = ZUK.
ENDFORM.
In the above coding we are concatenating VBAK-VTWEG (Distr channel), VBAK-SPART (Division), VBRP-VGBEL (Reference Order from billing item) as the criteria for invoice split. So if any of these field differ then it will cause a split. So basically we are creating one invoice for all items that reference a single order
So what you need to do for your requirement, is to copy the logic of data transfer routine 003 in VOFM to your own custom 9XX routine and make the assignment to ZUK / VBRK-ZUKRI only when shipping point (LIKP-VSTEL) is not equal to certain values that you don't want split to happen. It is better to maintain those shipping points in a custom table and make the check on the table rather than hard coding, so that in future it is easy to add more shipping points or remove existing ones if needed.
Also remember to assign the new data transfer routine number 9XX to all relevant item categories in VTFL for your target billing type and reference delivery type

No transfer order created via VL10A for certain shipping point

No transfer order created automatically via VL10A for a certain shipping point.
For Shipping Point E004 the TO is automatically created in VL10A, but for Shipping Point E070 it's not automatically created.
Could you kindly let me know why TO is not automatically created by Tcd VL10A?

Automatic TO creation depends the warehouse number or movement type. Can you check the warehouse number for both shipping points?
Regards,

Delivery output fax to shipping point

A delivery document needs to be faxed to the shipping point regardless of the partners. The output access sequence and output determination is updated, but the partner is causing a problem. The output should be generated as long as it is sent out of a shipping point which is assigned on output condition record. The fax number will be maintained at the shipping point in configuration.
Most of this works except that error is received because it doesn't find the fax on the ship to partner (which is not where I want it to be) or if I change the partner to 01 shipping point, error is that it can't find 01 as a partner (which it wouldn't).
Is this configuration or a user exit? What is the user exit?
Thank you,

Oss note is 81046: Shipping point as a partner in the delivery.
Need a output table that contains the shipping point.
Assign Output Determination procedures
Maintain Output types and reference the correct Access sequence
Maintain the access sequence to reference the table
Maintain the master data to support the new table

Creating delivery notes for providing material to vendor (subcontracting)

Hi,
I am pretty new in the PP module of SAP, and have a general question regarding the subcontracting process for single operations in a production order.
Assuming the raw material has id A and the final material has id B. My routing consists of several operations that have to be performed to transform A into B. One of the operations has to be done with subcontracting (key PP02), and the system creates the purchase requisition / purchase order for it. I have operations before and after it.
Now I need to send the parts to the vendor, and want to create some kind of delivery notes (paper), which helps controlling the shipping etc., how can I do this? All I have right now is the purchase order, which does not contain any information about the material, but only about the service to be performed by the vendor.
I already thought about assigning a bom for providing material in the purchase order. But then I would need a material ID for the semi-final part which is somewhere between A and B and would need to have it on stock.
What is the standard way of doing this?
Thanks in advance!
Kind regards!
Daniel

Hi Nandha!
Thanks for your quick response.
If I check the "Subcontracting" button on the tab Ext. processing in the production order, I need to assign components in the purchase order which will be provided to the vendor. These components either have to be on stock, or would be processed by MRP and planned orders would be created. That is not what I need.
I have only one single part which consists of a raw material and only gets modified by the operations. No other component will be added at the vendor. So which material ID should I assign to the purchase order in order to just send the semi-finished pieces to the vendor? I cannot assign the raw-material again, because it would create another demand in the MRP again! I also cannot put the semi-finished parts on stock, because I don't have a material id for the part in this status.
Thanks & regards!
Daniel

How could I set a fixed window for all resulution?

because I design the website in MAC when I transfer to PC it
change shape
how could I set a fixed size window for all resulution?

Using layers for page layout is just asking for trouble.
Trouble with
centering content, and trouble with expanding text.
Use tables until you can manage a proper CSS layout scheme,
i.e., NOT
layers. Start here -
http://www.projectseven.com/tutorials/css/qdmacfly/index.htm
http://www.macromedia.com/devnet/mx/dreamweaver/css.html
http://www.macromedia.com/devnet/dreamweaver/articles/tableless_layout_dw8.html
http://www.macromedia.com/devnet/dreamweaver/articles/css_concepts.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Media Fusion" <[email protected]> wrote in
message
news:[email protected]...
> What would you suggest then, and why not layers? I am
just going off of
> what I
> know and I am completly open for correction or cretique
on process,
> thought
> process etc...
>
>
quote:
Originally posted by:
Newsgroup User
> Ugh.
>
> Layers? Surely you jest?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Media Fusion" <[email protected]>
wrote in message
> news:[email protected]...
> > yes excatly, nothing should change when you bring
the files from mac to
> > pc, the
> > only thing that may be a slight issue is how you
coded the fonts for
> > text.
> > As
> > long as you set it up with pretty universal fonts
not much should
> > change.
> > I go
> > cross platform all the time, code is code. If you
want to really contain
> > the
> > positiong and location of your site design look in
to using layers in
> > combination with tables. That fixed my problem with
how different
> > browsers
> >
>
>
>
>
>
>

How could I config a Delivery Notes for a shipping point ?

Similar Messages

Maybe you are looking for