How could I find what "letter" is my Airport Extreme g, b,or n?

How could I find what "letter" is my Airport Extreme g, b,or n?

Click the Finder icon at the lower left of the dock on your Mac
Open Applications > Utilities > AirPort Utility
Hold down the option key on your Mac while you double-click on the picture of the AirPort Extreme
What model number do you see?

Similar Messages

  • How can I find the router number for airport extreme card?

    I am trying (unsuccessfully) to wirelessly connect my PlayStation 3 to my iMac Duo using the built in Airport Extreme Card.
    Can someone please tell me how to find the router number for the built-in Airport? I am using OSX 10.4.9. The wireless card type on my Mac info is "Airport Extreme (Ox14E4, Ox89)".
    Thanks in advance.

    Since the iMac is using OS X's Internet Sharing, the iMac is acting as a router. The router IP address created by the iMac is dependent on the IP address assigned to the iMac. The first 2 numbers are the same but the last 2 are .2.1.
    For instance:
    If your iMac is getting an IP address of 192.168.0.200 your Mac's router IP address will be 192.168.2.1
    Similarly, if your iMac is getting an IP address of 10.0.1.200 your Mac's router IP address will be 10.0.2.1
    So
    Open Network Utility.
    Click on "Info". Under "Please select a network interface for information" select "Network Interface (en0)" to see what IP address the iMac has been assigned.
    Click on "Info". Under "Please select a network interface for information" select "Network Interface (en1)" to see what IP address the iMac is using as the router address on the wireless interface.

  • How do I find the WPA for my Airport Extreme?

    How do find the WPA for Airport Extreme?

    It asks for my SSID,
    SSID is a fancy term for the actual name of a wireless network. So, you have two basic settings for  a wireless network:
    1) The actual Name of the network, or SSID. You set this up when you set up the AirPort Extreme.
    2) The Password of the wireless network. You also set this up when you set up the AirPort Extreme.
    I know the password, but it has two capitalized letters and in the Sony set up I can't find a way to get caps, just lower case
    Then it would be a good idea to change the wireless network password to all lower case letters to allow things to match up.
    It is also a good idea to keep the name of the wireless network....or SSID....simple.
    Use only normal letters and numbers.....with no special characters like an apostrophe, dollar sign, asterisk, etc. 
    Keep the wireless network name short.....no more than 20 characters with no blank spaces in the name. Mine is twndb for example.
    Same general guidelines for the wireless network password, except the password must have at least 8 characters.

  • How do i find the password for my airport extreme

    I have had an airport extreme for a number of years. Originaly it was set up buy the company I bought it from. However recently I have had some problems with my airport extreme and would like to upgrde the firmware, but it keeps asking for a password of which I have no knowledge of. My question is how do I get this pass word or how can I upgrade the firmware

    You will need to factory reset your Extreme. More info is here:
    http://support.apple.com/kb/ht3728

  • How do I find the password to my airport extreme base station?

    I have a flashing yellow leght on the base station and when I try to find out which one I have it asks for a password. I don't remember assigning one but it won't let me in.

    Launch Keychain Access located in  HD > Applications > Utilities
    Select passwords on the left.
    Type   base station    in the search field top right corner of the window.
    Now double click that keychain then select the Attributes tab.
    Select the box next to:  Show Password
    You may be prompted for your admin password before proceeding.
    Now open AirPort Utility located in the same Utilities folder. Select the base stattion on the left then click Manual Setup.
    Select AirPort from the menu at the top of that window then select the Base Station tab.
    Type in the correct password then select:  Remember this password in my keychain then click Update.

  • How do I find the Client ID with Airport Extreme?

    Cant find the Manual Setup feature in the airport utility.

    The Manual Setup feature....and a lot of other features..... were dropped when Apple went to Lion 10.7.4.
    The best that you can do is open AirPort Utility and click on the AirPort Extrme icon to get some basic info. Click Edit in the box to go deeper into the application.
    If you are still using Lion 10.7.4, you can install AirPort Utility 5.6 for Mac OS X Lion and keep it along with AirPort Utility 6.x on your Mac. Use the one that you want.
    AirPort Utility 5.6 will not install on Mountain Lion unless you employ some unofficial workarounds.

  • How could I find which i-views/pages are being used

    Hello
    I am pritty new in portal area. I have to administrate an ESS/MSS portal during hollydays. I am trying to find everywhere the way.
    How could I find which i-views/pages are being used. Let say I can see which group I belong and which roles are behind.
    How could I know in which PCD folder they are taken into account (to e.g give permission to someone not in the group)

    HI,
    the user administration (UME) gives you the information about the user <-> group <-> role assignment.
    When you know the role, search in the PCS for it, open the role and you will see all the pages / iviews assigned to the role.
    SAP Help: Role Assignment: http://help.sap.com/saphelp_nw04s/helpdata/en/59/bf2287b3cb5e48af94f99929ad15b9/content.htm
    SAP Help: Content Administration: http://help.sap.com/saphelp_nw04s/helpdata/en/5a/0339000c0b11d7b84800047582c9f7/content.htm
    br,
    Tobias

  • How do I find what's using my hard drive space

    My wife has a 14" iBook. How do I find what's using all the hard-drive space? It only has a 40GB hard-drive (it's one of the older G3 models) but there isn't a lot loaded onto the HD. There is only 3GB space left. I've gone through every application and utility and document and every folder (document, movie, etc.) and the largest space-hogging folder is iTunes which uses 15GB because of the music. I can't find any singular folder that uses any sizeable HD space. I recently loaded Tiger so I don't know if Tiger uses the rest of the space or if it's just a combo of all the other applications.

    You could download and use WhatSize to see what may be eating up the space.
    With a 40 GB hard drive, you need to keep at least 6 GB free in order to avoid problems.

  • How could I find specified date of REDO log and archive REDO log ?

    we use Oracle11gr2 on win2008R2.
    1
    How could I find specified date of REDO log(2013/10/17,etc) and archive REDO log ?
    2
    What is the format of archive REDO log.? (zipped file ?)

    user12075536123 wrote:
    1)
    select * from v$archived_log;
    select * from v$log_history;
    but there is a possibility there is no old data
    below contains no filename column
    SQL> desc v$log_history
    Name                                      Null?    Type
    RECID                                              NUMBER
    STAMP                                              NUMBER
    THREAD#                                            NUMBER
    SEQUENCE#                                          NUMBER
    FIRST_CHANGE#                                      NUMBER
    FIRST_TIME                                         DATE
    NEXT_CHANGE#                                       NUMBER
    RESETLOGS_CHANGE#                                  NUMBER
    RESETLOGS_TIME                                     DATE
    there is NO data when archive mode is disabled

  • How could i find my iphone using my apple id as i didn't configure icloud ID and it is stolen

    my iphone is stolen , how could i find it or even erase data using my apple ID as i didn't configure icloud ID?, it is ios 7.1.1

    Then you can't. You must have enabled Find My Phone in order to locate it.
    What To Do If Your iDevice Is Lost Or Stolen
    iPhone, iPod Touch, and iPad
    If you activated Find My Phone before it was lost or stolen, you can track it only if it is connected to the Internet by Wi-Fi or cellular. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. iCloud- Use Lost Mode
      6. What to do if your iOS device is lost or stolen
      7. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      8. Find My iPhone
      9. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • I forgot my Security Question and Security Info email. How can I reset my Secret Question or how can I find what was my Security Info email is?

    I forgot my Security Question and Security Info email. How can I reset my Secret Question or how can I find what was my Security Info email is?

    You won't be able to view and/or change your rescue email address until you can answer your security question(s). If you only have one security question then you should be able to reset it according to http://support.apple.com/kb/HT6170 :
    Reset your security questions
    Go to My Apple ID (appleid.apple.com).
    Select “Manage your Apple ID” and sign in.
    Select “Password and Security” on the left side of the page.
    If you have only one security question, you can change the question and answer now.
    If you have more than one security question:
    Select “Send reset security info email to [your rescue email address].” If you don't see this link or don't have access to your rescue address, contact Apple Support as described in the next section.
    Your rescue address will receive a reset email from Apple. Follow its instructions to reset your security questions and set up new questions and answers. Didn't receive the email ?
    After resetting your security questions, consider turning on two-step verification. With two-step verification, you don't need security questions to secure your account or verify your identity.
    If you have more than one question then as you can't remember your rescue email address then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps on this page to view and/or change your rescue email address for potential future use : http://support.apple.com/kb/HT5620
    Or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • Parental Controls - How do I find what apps are starting for an account?

    I turned on Parental Controls for my kids and when they log into their accounts they get a series of dialogs saying "You don't have permission to run <APP>, with Done, Always Allow and Allow Once buttons. Things like GoogleUpdater. None of these apps are in their startup list in System Preferences. How can I find what apps are set to startup for each account?
    - Thanks

    Here's a tip from another user that may help you:
    "I was running into the same problem trying to find apps for my daughters Iphone 3g running 4.2.1.  What I did was go to the Itunes store through Itunes on my PC, and then went to the bottom of the main page and clicked "Browse." On the browse page I selected, App Store, Games (category), Kids (subcategory), and then a list of apps appears below. 
    I sorted by date (oldest to newest) by right-clicking next to "price" and choosing "release date" on the menu that pops up. The date created field will then be showing, which you can click on to sort newest to oldest or oldest to newest.  I downloaded a bunch of free apps starting from the oldest (by name - you don't have much else to go on).  Of the 30 or so I added to my Itunes, about 27 of them were compatible with 4.2.1. 
    This is defintely not a perfect way of finding apps, but after spending a lot of time searching for a better way this was the best I could come up with."
    You can also check out these web sites:
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices
    http://findoldapps.com
    Other posts or users here may provide other tips on how to look for compatible apps.
    Regards.

  • How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now

    How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now and I only purchased my new iMac in December 2012
    Thanks....

    Launch Keychain Access and click on Login in the left hand pane and then on Passwords.  Next do search for Apple in the search field at the top and click on Apple ID Authenicication in the list that comes up.  That will give you the ID no. and password.
    OT

  • How do I find what table a field is in?

    Hi,
    If I know a field name, how would I search the Data Dictionary to find the table (or tables) that the field is found in?
    For example, I have a program spec that that says field AZSUB is in table MARM, but it is not.  How can I find what table this field is actualkly in?
    Thanks for your help!
    Andy

    Hi Andrew,
    Just goto se11, enter the data element of that field and clisk on the where used list on the application tool bar. You will get all the tables in which the field appears.
    You got find out which would be your appropriate table may be using by the description of the table or the contents or by the links..
    Regards,
    Vinod Kumar

  • I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

    I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

    Bookmarks and history are stored together in your profile folder in a database file named places.sqlite. These articles should help with restoring as much or as little of your other profile as you like:
    Locating the folder: [https://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help]
    The following article has suggestions for recovering bookmarks: [http://support.mozilla.com/en-US/kb/Lost%20Bookmarks Lost Bookmarks | Troubleshooting | Firefox Help].
    To move more settings, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

Maybe you are looking for

  • Program AI_RUNTIME_ SID not registered

    Hello, We're doing the post-installation tasks of XI 3.0 We've created the following RFC destinations in the ABAP environment: AI_RUNTIME_JCOSERVER AI_DIRECTORY_JCOSERVER LCRSAPRFC SAPSLDAPI When we test the AI_RUNTIME_JCOSERVER everything is ok, but

  • How to Add a new fields in the selection screen of LDB.

    Hi All, I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields. So could you please tell me for that where i need to add the code for selecting the data. Thanks Roli

  • Help needed in connecting to oracle9i

    Hi I am using oracle9i,tomcat5.0&jdk1.4.2. when i tried to connect my application with oracle it is showing " Failed to get connection object from the datasource: org.apache.commons.dbcp.SQL NestedException: Cannot create PoolableConnectionFactory, c

  • No accounting document generated for SD billing document

    Hello, We had a billing document with status "C Posting document has been created" but actually there was no accounting document generated. When we try to release the billing document again using VF02, the system displays the message "The document ha

  • My nokia E63 wont send texts plz help!!!! urgent!!...

    I can recieve texts but i cant send texts. ive already did a factory reset and i deleted messages to free up space but its still not working.