How Delta mechanism works for the datasource 0CRM_SALES_ACT_1 in CRM .

Hi all,
How Delta mechanism works for the datasource 0CRM_SALES_ACT_1 in CRM .
I mean timestamp, date etc? And how I can check that
Appreciate u r response.
Thanks
Pramod

Hi,
in your system, goto rsa1->tools->assign source system id....
regards
Siggi
PS: I strongly recommend to use the search functionality. This has been asked already a few times.

Similar Messages

How to make added custom field Delta mechanism work for LO Cookpit?

We appended a new custome field into extraction structure of the LO Cookpit datasource 2LIS_02_ITM through RSA6. And then run CMOD to write the exit code to populate the value and it works fine. But after we read Roberto's Weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it , find the enhancement we did can't make the Delta mechanism works if only this new field gets changed in a record, and the change cannot be reflected on BW.
In order to make the Delta mechansim works, one option is to append the custom field into one of the LIS Communication Structure MCEKKO of 2LIS_02_ITM extraction structure and then write the enhancement code to this LIS Communication Structure. In this way, the custom field can be treated like standard field that whenever it gets changed, the Delta mechanism or the user exit will be triggered. The enhancement for this LIS Communication Struture is LEINS001.
Now we've got two problems when doing the above enhancements of the LIS Communication structure:
1. Maintain extraction structure problem in LBWE:
We added a custom field, e.g., called ZZZ in LIS Communication structure MCEKKO (Purchasing Document Header) by creating a new custom append structure and add the field ZZZ into it, then activate the new append structure, but get warning msg like "Field name DUMMY is reserved (Do not use structure as include in DB table)".
We do find a field called DUMMY in the structure MCEKKO. How to get rid of the warning msg and successfully activate the new custom append structure with the new field ZZZ?
You could say that we can ignore the warning msg, but why the new custom field appended can not be seen from the right side pool of the Maintain Extract Structure in LBWE? We need to make the new custom field shows up in the right side pool and then drag it over to the left side frame and to activate the extraction structure to change it. But now it doesn't show up in the right frame pool!
2. Refer to Sanyam's weblog
/people/sanyam.kapur/blog/2005/04/30/custom-fields-and-bw-extractors-making-a-mixed-marriage-work-part-ii, there is a sample code inside this article which tells us how the sample code looks like to write this LIS Communicaton structure enhancement to make the Delta mechanism works, below is the code we modified to suit our needs, but don't know if it would work?
DATA: i_t_ekko LIKE ekko   OCCURS 1 WITH HEADER LINE.
DATA: ebeln LIKE ekpo-ebeln,
      it_ekko TYPE TABLE OF ekko WITH HEADER LINE,
      old_val(50) TYPE c. "For storing the value from the Field Symbol
FIELD-SYMBOLS <fs> TYPE ANY TABLE.
CASE zeitp.
WHEN 'MA'.                            "When creating a purchase order
    MOVE '(SAPLEINS)T_EKKO[]' TO old_val.
    ASSIGN (old_val) TO <fs>.
    i_t_ekko[] = <fs>.
    LOOP AT xmcekko.
      ebeln = xmcekko-ebeln.
      IF xmcekko-supkz = '1'.            "Old Value ?
        SELECT SINGLE * FROM ekko INTO it_ekko WHERE ebeln = ebeln.
        xmcekko-ZZZ = it_ekko-ZZZ.
      ELSE.                              "New Value ?
        READ TABLE i_t_ekko WITH KEY ebeln = ebeln.
        xmcekko-ZZZ = i_t_ekko-ZZZ.
      ENDIF.
      MODIFY xmcekko.
    ENDLOOP.
EndCase.
Share your ideas and we will give you reward points!

Hello Kevin
We have exactly the same problem. Did you solve it? If you did, could you please tell us how you did it? We neither see our field in LBWE. Our field is a Z field from a Z table.
I hope you could help us. We just have this issue to finish our project.
Thanks a lot in advanced

HT201272 If I go through "Purchased", how will it work for the ones I completed my album & single is no longer available?

Over the years, I've purchased 425 albums (2312 songs total).
I'm upgrading my hard drive, and was wondering how it worked for the 'Purchased' section. If I bought an album with "Complete My Album" and the 'Single' I got in pre-orders (or whatever) is no longer available for purchase, will I get it with my entire album download? Or will I have to go back & re-purchase that song? (considering I notice if the song is missing at all)
(If my rambling makes any sense) Does anyone know? or is this something I should ask Customer Support?

Go into iTunes store on computer. On the right hand side under quicklinks select Purchased. You can redownload any of those songs for free as long as you have authorized your computer. Just click the little cloud, or "download all"

How to get Tables for the datasource

Hi ,
When i have a datasource,How do i get to know..What are the table for that data source.
Thanks,
Kiran.

Hi,
In ECC:
1. goto RSO2 and give datasource name and display, if it is SAP defined datasource it will display some warning message in Status bar, so again press Enter Button and then see teh datasource there you can fine FM, Table/VIiew, InfoSet like that, in this way you can fine, if it is build on Function Module then you need to see that FM and debug and find. For LO dataSources you can fine in LBWE.
https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Thanks
Reddy

Delta not working for - 0CRM_SALES_ACT_1

Hi ,
Delta has stopped working for standard extractor 0CRM_SALES_ACT_1.
1] I deleted delta queue from RSA7 in R/3 to load new init, but init is not getting deleted from infopackage. Any idea ?
2] to correct this error, i want to load full repair load but which is the field in this extractor that captures delta ? (I mean 'changed date' like field. Bcoz created date field is only taking new records not changed ones.
Any suggestions to fix this delta and load missing records ?
Thanks,

HI,
1.Can you please check whether its updated to any other data target after loading the staging data target.
2.I remember we use to load with posting date.
Hope it helpsu2026

I have an event in my calendar that was sent by someone who does not work for the company anymore and I am reminded 2 times a week. How can I remove it?

I have an event in my calendar that was sent by someone that does not work for the company anymore and I am reminded 2 times a week. How do I delete it?

Tap on the event to open the event. Click the 'Edit' button in the event bubble, then press the 'Delete Event' button at the bottom of the Edit pop-up. It's a little different for events that come through Microsoft Exchange, you tap the event to bring up bubble and click the 'Details' button, and then press 'Decline' to remove the event.

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the thief logs out of iCloud. Would we able to locate the macbook?

I was looking at the "Find my iPhone" app and I have a doubt regarding how it works for the macbook. In order to detect the location, the macbook should remain signed into iCloud. What if the person who has stolen my macbook logs out of iCloud.
It should work fine for iPhone/iPad because we can enable "Restrictions" to prevent the user from signing out of iCloud. Do we have simialr settings for the macbook?
Thanks,

If it's not on the device list, it indicates that someone has gone to Find My iPhone on icloud.com and manually deleted it from the device list (as explained here: http://help.apple.com/icloud/#mmfc0eeddd), and it has not gone back online since (which would cause it to reappear on the device list; Find My iPhone has been turned of in settings on the device; the iClolud account has been deleted from the device; or the entire devices has been erased and restored.
Unfortunately, there's no other way to track the phone other than through Find My iPhone. You could call your carrier and see if they would blackliste it so at least the theif couldn't use it.

Hi i want to send an ipad of a gift to a friend in italy, can it be done? will the wifi and 3g still work? also how does it work for a warrenty?

hi i want to send an ipad of a gift to a friend in italy, can it be done? will the wifi and 3g still work? also how does it work for a warrenty?

WiFi will work, cellular will work but they may not be able to access LTE, they will have to send it back to you for the warranty work.

How to run setup for new datasources without breaking old datasources?

Hi,
I am wondering how to install some more data sources (2LIS_05_Q0NOTIF, 2LIS_17_10NOTIF and 2LIS_18_10NOTIF) without breaking the delta mechanism for other data sources when I start to use the new datasources.
I have installed some QM cubes (0QM_C04, -05, -08 and -11) and delta loads run every night. Now I want to add two more cubes (0QM_C02 and -03). The new cubes use datasources that are not yet available.
If I now activate the needed datasources, delete the content of the setup tables again and run 'Application-Specific Setup of Statistical Data' for 'Quality Management', 'Plant Maintenance' and 'Service Management', I am afraid that I will re-initialize the delta queue for the datasources that are already in use... In other words: I am afraid of breaking all datasources in application 05, 17 and 18...
I cannot find documentation addressing this problem. Any input, anyone?
Best regards,
Christian Frier

Hi all,
if I understand you all correctly, I can use the following plan:
0) Wait until no documents are posted on the R/3 side.
1) Run the delta loads and check that the queues are empty (RSA7 and LBWQ).
2) Delete the setup tables.
3) Run the 'Application-Specific Setup of Statistical Data'
4) Create and execute infopackages for initial dataload (for the new datasources).
5) Create and execute infopackages for delta loads (for the new datasources).
6) Run the infopackages for delta load from the 'old' datasources without running a new initial dataload.
So basically 6) is the step I worry about.
That is that I can start to use 2LIS_05_ITEM, 2LIS_17_ITEM and 2LIS_18_ITEM without breaking the delta sequence for 2LIS_05_TASK, 2LIS_17_TASK and 2LIS_18_TASK.
regards,
Christian

REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS

Hi Guru's,
REPEAT DELTA WILL WORK FOR MASTER DATA DELTA LOADS?
AS I AM NEW TO SAP-BI CAN ANY ONE GIVE THE DETAIL EXPLANATION ON IT.
IT WILL BE GREAT AND HELPFULL.
Thanks and Regards,
CM

Hi CM,
yes you can perform the repeat delta even for the master data if the datasource which was supplying the data was delta capable.
You can do the repeat delta only in case if your previous request was erroneous and dont forget to make the request red in the status,so that system will treat like you are requesting the failed request once again where in case you will miss the previous request, i,e erroneous request if you dont make the request red.
when you make the request red manually in the status,the pointer will move to the previous request once again in the delta queue and there will be no chance of missing the delta records.
This process was same for both transaction as well as master data.
Regards,
Sunil...

Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
e.g.
In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
/content/myproject/-/
So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
But the problem is there in following scenario.
I have an anchor tag as follows.
<a href="#" id="test"> click here </a>
And I am assigning the href to anchor through JQUERY.
<script>
$("#test").attr("href","/content/myproject/en.html");
</script>
Ideally this should have been mapped to "/en.html".
But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
How to resolve this.
Thanks,
Sai

In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

How do I test for the presence of an active open document in Photoshop?

I’m new to Adobe scripting, and one of my first scripts deals with the activeDocument in Photoshop.
If there is no activeDocument, I want to display a message and terminate the script. My efforts
so far have been met with frustration. While developing the script in ExtendScript Toolkit,
I used the test expression "activeDocument in app", and everything worked as expected. And when I installed the script
in the Photoshop scripts folder and ran it from Photoshop with a document open, it also worked.
But when I ran the script from Photoshop with no document open, it failed.
Moreover, after that,the script failed when I tried to run it in ESTK.
I did some testing and found that my test expression, "activeDocument in app"
was returning true, even though no document was open.
Still in ESTK, I replaced the “app” with ”Application” in the test expression. That worked when
I stepped through the script. But when I tried to run it without stopping, it stopped at the
test expression, and displayed the error message, “Application is undefined.”
So how do I test for the presence of an open document in Photoshop ??

After posting this, I discovered the Photoshop Scripting Forum, and I found my answer there.—
I should have used “app.Documents.length” as my test expression.

How to creat deadlock for the purchase order in SAP Workflow

How to creat deadlock for the purchase order in SAP Workflow

Hi Ben,
Are you using FM "CONVERT_DATE_TO_EXTERNAL" before passing delivery date? If not, use FM like this, before passing the date to BAPI_PO_CREATE1 and it might work
DATA: vf_doc_date(10),
             internal_date TYPE d.
     vf_doc_date = sy-datum.              "Document date.
     internal_date = vf_doc_date.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
    EXPORTING
      date_internal            = internal_date
    IMPORTING
      date_external            = vf_doc_date
    EXCEPTIONS
      date_internal_is_invalid = 1
      OTHERS                   = 2.
Regards,
Vivek

Flash Player only works for the account that downloaded it

I downloaded flash player and did not specify any special preferences, however, it doesn't work for the 2 other accounts on the computer. It only runs for the Administrator account from which i downloaded it. I'm running XP professional. Can someone tell me how to fix this?

hi, i had already deleted cookies, temp internet files, etc;
i only have the IE pop up blocker and blocking level set at Medium;
it's the latest version of FP 10.0.45.2.
I installed this version a couple of weeks ago and it worked ok for all accounts (the other 2 accounts are not admin) for a week. Then, it stopped working for all accounts, i reinstalled it (some trial and error involved), then when it finally reinstalled, only works for the one account. i just tried to reinstall from one of the other accounts and error mssg said "failed to register"
Date: Sun, 6 Jun 2010 11:20:59 -0600
From: [email protected]
To: [email protected]
Subject: Flash Player only works for the account that downloaded it
Hi ol, I would go to Tools, click on Internet Options and clear the Temp files. Delete Cookies, Delete Files, including the off line content. I would do this using all accounts. Also check the history files while you are there and delete those also unless you have done so recently.
What version of Flash Player do you have Installed?
Do you use any adblock or pop up blocker software?
Thanks,
eidnolb
>

HT1414 is there a ios downgrade that works for the 4s?

is there a downgrade that works for the iphone 4s from ios 6 to 5.1.1

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

How Delta mechanism works for the datasource 0CRM_SALES_ACT_1 in CRM .

Similar Messages

Maybe you are looking for