How do connect apple tv to bt wifi?

How do i connect apple tv to bt wifi?

Welcome to the Apple Community.
Select your network name and enter your password when prompted.

Similar Messages

  • How to connect Apple TV with AT&T Uverse

    Need help pls.  Not sure how to connect Apple TV2 to AT&T Uverse.  I know I need to connect one cable to my wireless router, and another cable from the HDMI port to my TV.  That part is clear.  But my Uverse router is in an upstairs closet, and my TV is downstairs in the living room - too far apart to connect cables to both devices from my ATV2.   Do I need to somehow put a bridge router next to my TV, so that I can connect my ATV2 to both my bridge router and to my TV?  Thank you

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How to connect Apple TV to ipad2 with air play

    Hi...how to connect Apple TV to ipad2 with AirPlay

    Hi. Your Apple TV should be connected to the TV (I'm using HDMI cables) and connected to the internet via a wireless or ethernet connection.
    The best way to test AirPlay is to play a movie trailer from the iTunes store. When you play a trailer you will see the AirPlay symbol at the bottom of the screen. Click on it and it will show your AirPlay devices - in your case the Apple TV. Select it an your video and sound will come out of your TV.
    I hope this helps. Google the AirPlay symbol. I tried to paste it into this message with no success.

  • How to connect Apple TV with an iPad ?

    How to connect Apple TV with iPad ?

    Welcome to the Apple Community.
    Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
    When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

  • How to connect Apple TV using an application

    I´m in a hotel and i want to connect my apple TV, the hotel have an aplication for connect to wi fi, how i can connect my apple TV using this feature

    If you have an iPhone 4s or later and IOS 7 or later you should have the AirPlay symbol on the phone and you can mirror the iPhone's display to the Apple Tv.
    See iOS: Use AirPlay Mirroring - Apple Support for complete details.
    <edit>
    Note with the Apple TV and IOS device need to be on the same wifi network for this to work so I'm not sure in this case, trying to connect to hotel wifi, if this will work.
    If you have IOS 8 on the IOS device you might be able to use peer-to-peer networking. This lets an IOS device connect directly to the Apple TV without needing to connect both devices to a wifi network.

  • How long b4 Apple does something about WiFi not workin on BRAND NEW macbook

    I've got a brand new Macbook Pro and I feel very stupid about buying it, as I can't use WiFi in 9 out of 10 places I go. Never had this problem with my G4 and all the other people who go to these same WiFi hosposts don't seem to have a problem. Honestly, I've tried every trick, every suggestion on every post on every forum. NOTHING solved the problem.How long before Apple addresses the problem?

    When I had the wireless upgrade kit installed into my PowerMac G5 Quad, it suffered exactly the same problems. Dropped connections at random, yet my original PowerMac G5, sitting right next to the Quad, full signal every time.
    Apple tech support couldn't shed any light on it, so I performed an erase and install. Completely wiped my hard drive and reinstalled from scratch.
    Wireless worked perfectly from there on, still does, no problem.
    With the 2 MBP's, I performed an erase and install prior to using the machine proper and neither have had wireless problems. The 15 inch was returned due to a grainy screen and I upgraded to 17".
    All I can suggest, from my own experience, is to back up your user data etc, perform an erase and install, log into your network during first start up after reinstall. Worked fine for me.

  • How to connect apple tv 2 to pioneer pdp s35

    How do I connect apple tv 2 to pioneer pdp.s35 tv? I connected to one of my pioneer receiver's hdmi ports but when I cycle through the inputs I can't find apple tv.  Thanks.

    Welcome to the Apple Community.
    I don't have or indeed know anything about your receiver, but unless the Apple TV can see an active device and connect via HDMI it won't turn on. You will need to set your receiver to use the correct input and then turn on the Apple TV.

  • How to connect Apple TV with my computer

    Having the same apple account on both, the TV does not show the files from the computer.
    Question: the computer is connected to the internet through WIFI, the apple TV is connected with a cable. Do I have to connect both the same way, either WIFI or cable ?!
    Thank you for your help already in advance.
    best regards,
    Atze

    Welcome to the Apple Community.
    The devices can be connected by any type of network, including mixed networks such as you describe. The first thing to check would be that both devices are on the same subnetwork though. check their addresses they should have different last parts to the address but the first three parts should be the same. (ie 192.168.1.x)

  • How to connect apple TV to ipad

    My new apple TV connects fine both to my WiFi and my TV, but not to the iPad.
    Whant is the solution here?

    To make the question more precise: I cannot find the Air Play icon anywhere on my iPad even if the Apple TV is set to Air Play. 

  • How to connect apple tv generation 1 after itunes 11 upgrade?

    After upgrading to iTunes 11 I lost connection to my Apple TV Generation 1.  I have tried everything suggested in the forums, but was hoping someone has any other suggestions.
    This is what I have allready done:
    - Power cycle apple tv
    - Power cycle WIFI network
    - Power cycle PC
    - Disable firewalls
    - Reinstall iTunes
    - Factory restore apple TV
    - Upgraded apple TV genaratio 1 to latest firmware
    - Power cycle everything again...
    I confirmed that connectivity is fine.  Apple TV connects to internet (youtube etc.).  Also I can ping AppleTV from my PC.
    Again, tried everything I could find on the forums without luck.
    Anyone have any other suggestions or troubleshooting steps?
    Thanks in advance!

    I was able to fix this by enabling IGMP broadcasting on my router for the IP addresses of the PC with iTunes and the apple tv.  It appears that bonjour uses this and iTunes recognized appleTV immediately.
    I did run into another issue.  After upgrading to the latest firmware Apple TV keeps rebooting/restarting...

  • How to connect Apple TV to Sony str-dg800?

    Need to understand how to connect AppleTV 3GL to Sony STR-DG800 A/V receiver.

    Have you used optical audio cable from apple tv to sony?

  • How to connect Apple TV to DVD blu-ray home theatre

    Hi guys, I am planning to buy Apple TV2 and I was wondering is there setup guide for connecting to HDTV and home theatre system. I currently have LG HDTV and LG DVD Blu-ray Home Theatre. They are connected with HDMI 1.3 cable and I had to get optical cable to get sound from TV to Home theatre.
    How is Apple TV fits into that? I have 1 HDMI slot free on TV and 2 HDMI inputs on DVD system.
    I was thinking just to connect Apple TV to DVD via HDMI? Would that put sound on home theatre system?
    Thank you in advance.
    ddrasko

    You have read home theatre manual about playing sound from external device.
    You doesn't need to connect home theatre to tv at all as you have get video from apple tv.
    Connect video output from apple tv to tv(may carry sound along) and optical cable from apple tv to home theatre.
    That will do. You can mute sound of tv(in case hdmi carry sound along) or using other function(on samsung ) and hear from home theatre sound from speakers.

  • How to connect Apple TV's HDMI to HDTV's DVI connector?

    My TV is equipped with DVI and VGA connector, the issue is how to link Apple TV's HDMI with my TV? DVI connector is for video only!! or I have to link apple TV's HDMI to VGA connector?

    Apple TV only supports HDMI so there is no guarantee with converters. You may also run into issues with HDCP

  • How to connect apple tv2 to receiver

    Apple tv is connected to tv via hdmi - working perfectly. But i would like to connect apple tv to my receiver as well - for surround sound on movies and for streaming audio from the computer.
    My receiver has 3 optical ports in addition to the DVD coax ( CD, CDR and TV) which one do i use to connect from apple tv  - none seem to work.
    Apple TV set to dolby output.
    receiver digital in is turned on
    No sound from the receiver
    Help!

    Welcome to the Apple Community.
    You need to use one of the optical ports.
    Are you sure they are optical ports.
    Are you sure you are matching the input to the output correctly on the receiver.
    Have you tried adjusting the audio out and Dolby digital settings on the Apple TV.

  • How to connect Apple TV when I have run out of HDMI Ports?

    I have a Sony Bravia TV with 3 HDMI Ports - in those I have connected:
    - Sony Home Theater Surround Sound
    - Playstation
    - Sky Digital TV HD Box
    Is there a way to connect Apple TV without disconnecting any of the above? (and without buying a new TV with 4 HDMI ports!)

    lkrupp is correct, the only soution is to add what's called an HDMI switch to your setup.  The HDMI switch normally has 2, 4, 6, or 8 HDMI inputs and one output.  The output goes to your display.  You then select which input you want to choose.In your case, you can do one of two things:
    Connect all your sources to the HDMI switch.  You then select sources via the HDMI switch and you no longer need to change HDMI inputs on your TV.
    Disconnect one of the HDMI sources you have (let's say it's the Playstation) and plug both the Playstation and the APPLE TV into the switch.  In this setup you need to change the input on both the TV and the HDMI switcher.
    The simplest setup in your case is to buy a 4 or 8 port HDMI switch and put all your devices on the switch.  If you are looking for inexpensive HDMI switches, you need to look at Monoprice.  The stuff is all manufactured overseas and can be hit or miss but it's the cheapest that you'll find.  If you feel like you need some guidance and help, then try www.hdtvsupply.com.  They have a good selection and great support.

Maybe you are looking for

  • Getting unique values from internal table

    Hi Gurus, From time to time I hit this problem and so far I havn't found any nice solution. I've an internal table with several fields. I would like to get all unique values for one (or several) of these fields. However let say that this table has a

  • What is the use of end routine in bi 7.0

    hi friends, what is the use of end routine in bi 7.0. what scenerio we use end routine. Thanking u suneel.

  • Problems installing Quicktime

    When installing Quicktime, I get the error message that says C:\Documents~1\Megan\Locals~1\Temp\IXP972.TMP\ cannot be found and that the old version cannot be removed. Ive tried finding this file, deleting temporary files and nothing works. Any sugge

  • Can someone tell me how to delta update data from db like oracle?

    Hi gurus:      as the title,can someone tell me how to delta update data from db like oracle? and can someone give me some link about the detail of delta update?     thanks very much. chan

  • Updated to IOS5 can not use camera....

    I do not have the camera option on the opening page.  Also I am unable to text.  I receive error messages saying that it is not a valid number.  Please help!