How do get my ipod to work again after it died

How do i get my ipod to work again after it died and wont charge?

Well...hm... Your going to have to replace it, or get it serviced. Or give it to Apple for a 10% discount on another. What gen is it? Some people buy broken iPods like:
https://www.gazelle.com
or maybe its spelled https://www.gazzelle.com
I dont remember

Similar Messages

Anyone have a syggestion on how to get my Ipod touch working again besides putting it into restore mode

Anyone have any ideas on how to get an Ipod touch to charge or sync without putting it into restore mode, I've prettymuch tried everything thats been put online so far

Tried DFU mode?
To do this follow these instructions:
    1. First, Open up iTunes, plug in your iPod Touch/iPhone to the Computer's USB port. Turn on your Computer's speaker and make sure it is loud enough that you can hear it.
    2. Hold down the Home button (top left for iPod Touch and top right for the iPhone with the screen facing you) and the Power button (located on the front bottom of your iPod Touch/iPhone) simutaneously, until the screen goes black and the device turns off. (past the red slider/slide to power off screen)
    3. Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
    4. After around ~10-20 seconds, you will hear a noise (beep/ding) from your Computer as if it had just recognized a new hardware device, now iTunes should recognize it in DFU mode.
    5. After iTunes recognizes the iPod Touch/iPhone, let go of the Home button otherwise it will go into recovery mode and you will have to do the entire DFU process over again.
    6. You will know when you have put your iPod Touch/iPhone correctly into DFU mode when the display is blank and that you do not have anything on your device.
Once you have done this click restore and iTunes sould start to dowbnload and install the latest firmware.
#Please note this will reset your iDevice to factory settings
Syther101

HT1766 How do I get my iPod to work again after is has been disabled because I forgot my password & now I remember it?

My iPod Touch has been disabled because I had forgotten the password. Now I remember the password but can't get the iPod unlocked. I am hooked up to iTunes but can't get it unlock still? What am I doing wwrong????/

1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.

Anyone figure out how to get Powershot G2 to work again after update to 1.5

All my raw files from my Powershot G2 are now "Unsupported" since the update. Has anyone figured out how to update the program to allow support for that camera again? Any help would be much appreciated! Thanks

You can get the old hack for the Canon Powershot G2 RAW support to work again on 10.4.8 and Aperture 1.5, and you do NOT need to revert back to the old 10.4.7 IO Frameworks file. The solution is to download the new 2006-01 RAW Camera Support update from Apple's web site. Here is the link version for PPC machines (which is what I have):
http://www.apple.com/support/downloads/digitalcamerarawsupportupdateppc.html
There his also a Universal version on Apples site (but I have not tried this version):
http://www.apple.com/support/downloads/digitalcamerarawsupportupdateuniversal.ht ml
After you install this update, it will place a new copy of the RAW.plist file in the usual place:
/System/Library/Frameworks/ApplicationServices.framework/Frameworks/ImageIO.fram ework/Versions/Current/Resources/Raw.plist
Edit this file with the old hack, making sure to add the "" to the 1st line and save it back. A few notes on this:
1) I'm not sure whether the "" is needed, but similar items appear in all other cameras now, so no harm in adding it.
2) To place the editted version back in the library, I had to 1st move the old RAW.plist file to the trash, then copied the editted version to the library. I then restarted to allow me to delete the version in the trash (otherwise the system thinks it is still in use).
3) To be safe, I also did a repair permisssions (which did repair the permissions of the new RAW.plist file).
After this, I was able to open Powershot G2 RAW files in Aperture and PReview (have not tried iPhoto, but is shoudl also work there).
Here is the hacked code for the Canon G2 camera.
<key>Canon-PowerShot G2</key> 
<dict>
<key>blackReplace</key> <true/>
<key>black</key> <integer>32</integer>
<key>max</key> <integer>1023</integer>
<key>white</key> <integer>1023</integer>
<key>premul0</key> <real>1.90</real> <key>premul1</key> <real>1.00</real> <key>premul2</key> <real>1.22</real>
<key>m1</key>
<array>
<real>1.0507</real> <real>-0.4281</real> <real>-0.0161</real>
<real>-0.5540</real> <real>1.2938</real> <real>0.2909</real>
<real>-0.1205</real> <real>0.1844</real> <real>0.8335</real>
</array>
<key>m2</key>
<array>
<real>0.9087</real> <real>-0.2693</real> <real>-0.1049</real>
<real>-0.6715</real> <real>1.4382</real> <real>0.2537</real>
<real>-0.2291</real> <real>0.2819</real> <real>0.7790</real>
</array>
<key>mc</key> <real>0.83355</real>
<key>otrc</key>
<array>
<real>0.450</real> <real>0.090</real> <real>1.467</real> <real>0.260</real> <real>1.842</real> <real>0.652</real> <real>1.040</real> <real>0.538</real>
</array>
</dict>

HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

Fixed it!
1. Made sure itunes software was up to date
2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
3. Connected to itunes
4. Pressed restore and update ipod
Update successful and ipod taken out of recovery mode

HT201304 my ipod was stolen and it says "ipod is disabled,connect to itunes" on screen saver. How would i get my ipod to work again?

My ipod touch was stolen and i got it back.on the screen saver it now says,"ipod is disabled,connect to itunes" what do i have to do to get my ipod touch working again?

http://support.apple.com/kb/HT1212
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

If you have iOS 5 installed on it, you don't need a PC. simply turn it on and set it up.
if you don't have iOS 5 then you'll need a computer.

How can get my flash to work again?

How can I get my flash to work again?

Flash is not a feature of the Adobe Reader for iOS.
To answer directly, though, per orders of Apple, Adobe has never released a version of Flash for iOS. You can't get something “to work again” if there never was such a product on this platform.
- Dov

HT4623 How do you get your phone to work again after the iTunes update?

I did an update on my iPhone from iTunes and now the I only have one screen on my phone that has a picture of the iTunes app and the USB cord. I have plugged and unplugged my phone. I have tried to turn it off. I have turned off my computer, but I only get the same screen. What can I do to get my phone to work properly again?

That app should have a video on how to do that. IF not look at their support site.

How to get picture package to work again

I made the mistake of downloading the Yosemite operating system and now cannot get the picture package to work again. I have switched to 32 bit but this time it did not solve the problem. Again I really need help. I am using an iMac and have Photoshop version CS5.1
Mary

Did you look in the photoshop cs5.1 plugins folder to see if the ContactSheetII.plugin and WebContactSheetII.plugin are still there?
On some peoples systems, upgrading to Yosemite, for some reason, deletes some of the photoshop cs5/cs5.1 files.

How to get the 'info' button working again in Spotlight?

The 'info' button to get info about an item in the search results window of Spotlight is no longer working for me. I have tried reindexing and trashing the preference file in the user library, with no luck. Any idea how to get this functionality back?
Thanks
Chris

I have the same problem after installing Safari 3, the more info icon in the spotlight results no longer works.
Dan

Any advice on how to get Xprotect Updater to work again?

I know that it was faithfully doing it's job -- as long as immediately after I started-up my computer, I got online right away. It has always seemed to be on a timer of some sort and thus, never worked unless I followed that routine (which was fairly easy to figure out -- as Little Snitch clearly revealed).
Even, when (Xprotect Updater) is updated by Apple, I could clearly see the increase in the size of the signature payload.
I assume that it normally overwrites the signature cache or whatever it's supposed to do each and each & every time one first signs on (albeit promptly) because I could see it as it happened using Little Snitch. It ran like a Swiss Watch, did it's signature overwrite, thank you very much; but now I'm lost.
Perhaps Apple is working on it at their end & it's temporarily down? Which has happened in the past and, of course, the signature payload was predictably greater once it started working again.
Thanks in advance,
mm~

All-set; problem solved.
I found a reference to toggling "Automatically install important security updates"... found under System Prefs/Security/General.
I did that which worked great.
Rock On

HT201274 After i erased all my content and settings on my ipod touch my screen has the itunes logo with the cable. how do i get my ipod to work again?

After i erased all my content and settings on my ipod touch my screen has the itunes logo and a cable on it. how can i get my home screen back?

Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software

How can I get my iPod to work again?

i forgot the code to my iPod because I havent used it for along time I tried it too much and it says connect to iTunes but I can't because the dock connector in the iPod is broken.I really need to use it for something help :)

If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Otherwise you need a working dock connector and computer wither iTuned and internet connection
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My touch screen isn't working so I can't use my iPad.any ideas how to get the touch screen working again?

My son has done something to his ipad2 and now his touch screen does not work so he can't get from the lock screen as the screen isn't responding to touch. Any idea I can't even switch it off to restart.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

How do get my ipod to work again after it died

Similar Messages

Maybe you are looking for